Browse
Submit Data
Databases
API
Help

Dataset Information

26 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Electronic Properties of Tetraazaperopyrene Derivatives on Au(111): Energy-Level Alignment and Interfacial Band Formation.

ABSTRACT: N-heteropolycyclic aromatic compounds are promising organic electron-transporting semiconductors for applications in field-effect transistors. Here, we investigated the electronic properties of 1,3,8,10-tetraazaperopyrene derivatives adsorbed on Au(111) using a complementary experimental approach, namely, scanning tunneling spectroscopy and two-photon photoemission combined with state-of-the-art density functional theory. We find signatures of weak physisorption of the molecular layers, such as the absence of charge transfer, a nearly unperturbed surface state, and an intact herringbone reconstruction underneath the molecular layer. Interestingly, molecular states in the energy region of the sp- and d-bands of the Au(111) substrate exhibit hole-like dispersive character. We ascribe this band character to hybridization with the delocalized states of the substrate. We suggest that such bands, which leave the molecular frontier orbitals largely unperturbed, are a promising lead for the design of organic-metal interfaces with a low charge injection barrier.

SUBMITTER: Stein A

PROVIDER: S-EPMC8450938 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Structural and electronic properties of graphene nanoflakes on Au(111) and Ag(111).

Project description:We investigate the electronic properties of graphene nanoflakes on Ag(111) and Au(111) surfaces by means of scanning tunneling microscopy and spectroscopy as well as density functional theory calculations. Quasiparticle interference mapping allows for the clear distinction of substrate-derived contributions in scattering and those originating from graphene nanoflakes. Our analysis shows that the parabolic dispersion of Au(111) and Ag(111) surface states remains unchanged with the band minimum shifted to higher energies for the regions of the metal surface covered by graphene, reflecting a rather weak interaction between graphene and the metal surface. The analysis of graphene-related scattering on single nanoflakes yields a linear dispersion relation E(k), with a slight p-doping for graphene/Au(111) and a larger n-doping for graphene/Ag(111). The obtained experimental data (doping level, band dispersions around EF, and Fermi velocity) are very well reproduced within DFT-D2/D3 approaches, which provide a detailed insight into the site-specific interaction between graphene and the underlying substrate.

| S-EPMC4802307 | biostudies-other

Width-Dependent Band Gap in Armchair Graphene Nanoribbons Reveals Fermi Level Pinning on Au(111).

Project description:We report the energy level alignment evolution of valence and conduction bands of armchair-oriented graphene nanoribbons (aGNR) as their band gap shrinks with increasing width. We use 4,4″-dibromo-para-terphenyl as the molecular precursor on Au(111) to form extended poly-para-phenylene nanowires, which can subsequently be fused sideways to form atomically precise aGNRs of varying widths. We measure the frontier bands by means of scanning tunneling spectroscopy, corroborating that the nanoribbon's band gap is inversely proportional to their width. Interestingly, valence bands are found to show Fermi level pinning as the band gap decreases below a threshold value around 1.7 eV. Such behavior is of critical importance to understand the properties of potential contacts in GNR-based devices. Our measurements further reveal a particularly interesting system for studying Fermi level pinning by modifying an adsorbate's band gap while maintaining an almost unchanged interface chemistry defined by substrate and adsorbate.

| S-EPMC5789393 | biostudies-literature

Synthesis, electronic properties and self-assembly on Au{111} of thiolated (oligo)phenothiazines.

Project description:(Oligo)phenothiazinyl thioacetates, synthesized by a one-pot sequence, are electrochemically oxidizable and highly fluorescent. SAMs can be readily formed from thiols prepared by in situ deprotection of the thioacetates in the presence of a gold-coated silicon wafer. Monolayer formation is confirmed by ellipsometry and the results compared to those obtained by force field and DFT calculations.

| S-EPMC2919263 | biostudies-literature

Band Structure and Energy Level Alignment of Chiral Graphene Nanoribbons on Silver Surfaces.

Project description:Chiral graphene nanoribbons are extremely interesting structures due to their narrow band gaps and potential development of spin-polarized edge states. Here, we study their band structure on low work function silver surfaces. The use of a curved Ag single crystal provides, within the same sample, regions of disparate step structure and step density. Whereas the former leads to distinct azimuthal growth orientations of the graphene nanoribbons atop, the latter modulates the substrate's work function and thereby the interface energy level alignment. In turn, we disclose the associated charge transfer from the substrate to the ribbon and assess its effect on the nanoribbon's properties and the edge state magnetization.

| S-EPMC8705322 | biostudies-literature

Interfacial Properties of Monolayer and Bilayer MoS2 Contacts with Metals: Beyond the Energy Band Calculations.

Project description:Although many prototype devices based on two-dimensional (2D) MoS2 have been fabricated and wafer scale growth of 2D MoS2 has been realized, the fundamental nature of 2D MoS2-metal contacts has not been well understood yet. We provide a comprehensive ab initio study of the interfacial properties of a series of monolayer (ML) and bilayer (BL) MoS2-metal contacts (metal = Sc, Ti, Ag, Pt, Ni, and Au). A comparison between the calculated and observed Schottky barrier heights (SBHs) suggests that many-electron effects are strongly suppressed in channel 2D MoS2 due to a charge transfer. The extensively adopted energy band calculation scheme fails to reproduce the observed SBHs in 2D MoS2-Sc interface. By contrast, an ab initio quantum transport device simulation better reproduces the observed SBH in 2D MoS2-Sc interface and highlights the importance of a higher level theoretical approach beyond the energy band calculation in the interface study. BL MoS2-metal contacts generally have a reduced SBH than ML MoS2-metal contacts due to the interlayer coupling and thus have a higher electron injection efficiency.

| S-EPMC4772071 | biostudies-literature

Electronic Structure and Luminescence of Quasi-Freestanding MoS2 Nanopatches on Au(111).

Project description:Monolayers of transition metal dichalcogenides are interesting materials for optoelectronic devices due to their direct electronic band gaps in the visible spectral range. Here, we grow single layers of MoS2 on Au(111) and find that nanometer-sized patches exhibit an electronic structure similar to their freestanding analogue. We ascribe the electronic decoupling from the Au substrate to the incorporation of vacancy islands underneath the intact MoS2 layer. Excitation of the patches by electrons from the tip of a scanning tunneling microscope leads to luminescence of the MoS2 junction and reflects the one-electron band structure of the quasi-freestanding layer.

| S-EPMC4990308 | biostudies-literature

Electronic and vibrational surface-enhanced Raman scattering: from atomically defined Au(111) and (100) to roughened Au.

Project description:In surface-enhanced Raman spectra, vibrational peaks are superimposed on a background continuum, which is known as one major experimental anomaly. This is problematic in assessing vibrational information especially in the low Raman-shift region below 200 cm-1, where the background signals dominate. Herein, we present a rigorous comparison of normal Raman and surface-enhanced Raman spectra for atomically defined surfaces of Au(111) or Au(100) with and without molecular adsorbates. It is clearly shown that the origin of the background continuum is well explained by a local field enhancement of electronic Raman scattering in the conduction band of Au. In the low Raman-shift region, electronic Raman scattering gains additional intensity, probably due to a relaxation in the conservation of momentum rule through momentum transfer from surface roughness. Based on the mechanism for generation of the spectral background, we also present a practical method to extract electronic and vibrational information at the metal/dielectric interface from the measured raw spectra by reducing the thermal factor, the scattering efficiency factor and the Purcell factor over wide ranges in both the Stokes and the anti-Stokes branches. This method enables us not only to analyse concealed vibrational features in the low Raman-shift region but also to estimate more reliable local temperatures from surface-enhanced Raman spectra.

| S-EPMC8162194 | biostudies-literature

Electronic Band Alignment at Complex Oxide Interfaces Measured by Scanning Photocurrent Microscopy.

Project description:The band alignment at an Al2O3/SrTiO3 heterointerface forming a two-dimensional electron gas (2DEG) was investigated using scanning photocurrent microscopy (SPCM) in an electrolyte-gated environment. We used a focused UV laser source for above-the-bandgap illumination on the SrTiO3 layer, creating electron-hole pairs that contributed to the photocurrent through migration towards the metal electrodes. The polarity of the SPCM signals of a bare SrTiO3 device shows typical p-type behavior at zero gate bias, in which the photogenerated electrons are collected by the electrodes. In contrast, the SPCM polarity of 2DEG device indicates that the hole carriers were collected by the metal electrodes. Careful transport measurements revealed that the gate-dependent conductance of the 2DEG devices exhibits n-type switching behavior. More importantly, the SPCM signals in 2DEG devices demonstrated very unique gate-responses that cannot be found in conventional semiconducting devices, based on which we were able to perform detailed investigation into the electronic band alignment of the 2DEG devices and obtain the valence band offset at the heterointerface.

| S-EPMC5476647 | biostudies-literature

Structural and electronic properties of MoS<sub>2</sub> and MoSe<sub>2</sub> monolayers grown by chemical vapor deposition on Au(111).

Project description:The exceptional electronic and photonic properties of the monolayers of transition metal dichalcogenides including the spin-orbit splitting of the valence and conduction bands at the K points of the Brillouin zone make them promising for novel applications in electronics, photonics and optoelectronics. Scalable growth of these materials and understanding of their interaction with the substrate is crucial for these applications. Here we report the growth of MoS2 and MoSe2 monolayers on Au(111) by chemical vapor deposition at ambient pressure as well as the analysis of their structural and electronic properties down to the atomic scale. To this aim, we apply ultrahigh vacuum surface sensitive techniques including scanning tunneling microscopy and spectroscopy, low-energy electron diffraction, X-ray and angle-resolved ultraviolet photoelectron spectroscopy in combination with Raman spectroscopy at ambient conditions. We demonstrate the growth of high-quality epitaxial single crystalline MoS2 and MoSe2 monolayers on Au(111) and show the impact of annealing on the monolayer/substrate interaction. Thus, as-grown and moderately annealed (<100 °C) MoSe2 monolayers are decoupled from the substrate by excess Se atoms, whereas annealing at higher temperatures (>250 °C) results in their strong coupling with the substrate caused by desorption of the excess Se. The MoS2 monolayers are strongly coupled to the substrate and the interaction remains almost unchanged even after annealing up to 450 °C.

| S-EPMC10729873 | biostudies-literature

Energy band alignment at the heterointerface between CdS and Ag-alloyed CZTS.

Project description:Energy band alignment at the heterointerface between CdS and kesterite Cu2ZnSnS4 (CZTS) and its alloys plays a crucial role in determining the efficiency of the solar cells. Whereas Ag alloying of CZTS has been shown to reduce anti-site defects in the bulk and thus rise the efficiency, the electronic properties at the interface with the CdS buffer layer have not been extensively investigated. In this work, we present a detailed study on the band alignment between n-CdS and p-CZTS upon Ag alloying by depth-profiling ultraviolet photoelectron spectroscopy (UPS) and X-ray photoelectron spectroscopy (XPS). Our findings indicate that core-level peaks and the valence band edge of CdS exhibit a significant shift to a lower energy (larger than 0.4 eV) upon the etching of the CdS layer, which can be assigned due to band bending and chemical shift induced by a change in the chemical composition across the interface. Using a simplified model based on charge depletion layer conservation, a significantly larger total charge region depletion width was determined in Ag-alloyed CZTS as compared to its undoped counterpart. Our findings reveal a cliff-like band alignment at both CdS/CZTS and CdS/Ag-CZTS heterointerfaces. However, the conduction-band offset decreases by more than 0.1 eV upon Ag alloying of CZTS. The approach demonstrated here enables nanometer-scale depth profiling of the electronic structure of the p-n junction and can be universally applied to study entirely new platforms of oxide/chalcogenide heterostructures for next-generation optoelectronic devices.

| S-EPMC7591932 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data