Browse
Submit Data
Databases
API
Help

Dataset Information

20 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Influence of Iron Sulfide Nanoparticle Sizes in Solid-State Batteries*.

ABSTRACT: Given the inherent performance limitations of intercalation-based lithium-ion batteries, solid-state conversion batteries are promising systems for future energy storage. A high specific capacity and natural abundancy make iron disulfide (FeS₂ ) a promising cathode-active material. In this work, FeS₂ nanoparticles were prepared solvothermally. By adjusting the synthesis conditions, samples with average particle diameters between 10 nm and 35 nm were synthesized. The electrochemical performance was evaluated in solid-state cells with a Li-argyrodite solid electrolyte. While the reduction of FeS₂ was found to be irreversible in the initial discharge, a stable cycling of the reduced species was observed subsequently. A positive effect of smaller particle dimensions on FeS₂ utilization was identified, which can be attributed to a higher interfacial contact area and shortened diffusion pathways inside the FeS₂ particles. These results highlight the general importance of morphological design to exploit the promising theoretical capacity of conversion electrodes in solid-state batteries.

SUBMITTER: Dewald GF

PROVIDER: S-EPMC8456928 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

All-Solid-State Lithium-Ion Batteries with Oxide/Sulfide Composite Electrolytes.

Project description:Li6.3La3Zr1.65W0.35O12 (LLZO)-Li6PS5Cl (LPSC) composite electrolytes and all-solid-state cells containing LLZO-LPSC were fabricated by cold pressing at room temperature. The LPSC:LLZO ratio was varied, and the microstructure, ionic conductivity, and electrochemical performance of the corresponding composite electrolytes were investigated; the ionic conductivity of the composite electrolytes was three or four orders of magnitude higher than that of LLZO. The high conductivity of the composite electrolytes was attributed to the enhanced relative density and the rule of mixture for soft LPSC particles with high lithium-ion conductivity (~10-4 S·cm-1). The specific capacities of all-solid-state cells (ASSCs) consisting of a LiNi0.8Co0.1Mn0.1O2 (NCM811) cathode and the composite electrolytes of LLZO:LPSC = 7:3 and 6:4 were 163 and 167 mAh·g-1, respectively, at 0.1 C and room temperature. Moreover, the charge-discharge curves of the ASSCs with the composite electrolytes revealed that a good interfacial contact was successfully formed between the NCM811 cathode and the LLZO-LPSC composite electrolyte.

| S-EPMC8073507 | biostudies-literature

Rational Optimization of Cathode Composites for Sulfide-Based All-Solid-State Batteries.

Project description:All-solid-state lithium-ion batteries with argyrodite solid electrolytes have been developed to attain high conductivities of 10-3 S cm-1 in studies aiming at fast ionic conductivity of electrolytes. However, no matter how high the ionic conductivity of the electrolyte, the design of the cathode composite is often the bottleneck for high performance. Thus, optimization of the composite cathode formulation is of utmost importance. Unfortunately, many reports limit their studies to only a few parameters of the whole electrode formulation. In addition, different measurement setups and testing conditions employed for all-solid-state batteries make a comparison of results from mutually independent studies quite difficult. Therefore, a detailed investigation on different key parameters for preparation of cathodes employed in all-solid-state batteries is presented here. Employing a rational approach for optimization of composite cathodes using solid sulfide electrolytes elucidated the influence of different parameters on the cycling performance. First, powder electrodes made without binders are investigated to optimize several parameters, including the active materials' particle morphology, the nature and amount of the conductive additive, the particle size of the solid electrolyte, as well as the active material-to-solid electrolyte ratio. Finally, cast electrodes are examined to determine the influence of a binder on cycling performance.

| S-EPMC9866434 | biostudies-literature

Functionalized Sulfide Solid Electrolyte with Air-Stable and Chemical-Resistant Oxysulfide Nanolayer for All-Solid-State Batteries.

Project description:Sulfide solid electrolytes (SEs) with high Li-ion conductivities (σion) and soft mechanical properties have limited applications in wet casting processes for commercial all-solid-state batteries (ASSBs) because of their inherent atmospheric and chemical instabilities. In this study, we fabricated sulfide SEs with a novel core-shell structure via environmental mechanical alloying, while providing sufficient control of the partial pressure of oxygen. This powder possesses notable atmospheric stability and chemical resistance because it is covered with a stable oxysulfide nanolayer that prevents deterioration of the bulk region. The core-shell SEs showed a σion of more than 2.50 mS cm-1 after air exposure (for 30 min) and reaction with slurry chemicals (mixing and drying for 31 min), which was approximately 82.8% of the initial σion. The ASSB cell fabricated through wet casting provided an initial discharge capacity of 125.6 mAh g-1. The core-shell SEs thus exhibited improved powder stability and reliability in the presence of chemicals used in various wet casting processes for commercial ASSBs.

| S-EPMC7558032 | biostudies-literature

Elucidating Ion Transport Phenomena in Sulfide/Polymer Composite Electrolytes for Practical Solid-State Batteries.

Project description:Despite the enormous interest in inorganic/polymer composite solid-state electrolytes (CSEs) for solid-state batteries (SSBs), the underlying ion transport phenomena in CSEs have not yet been elucidated. Here, we address this issue by formulating a mechanistic understanding of bi-percolating ion channels formation and ion conduction across inorganic-polymer electrolyte interfaces in CSEs. A model CSE is composed of argyrodite-type Li6PS5Cl (LPSCl) and gel polymer electrolyte (GPE, including Li+-glyme complex as an ion-conducting medium). The percolation threshold of the LPSCl phase in the CSE strongly depends on the elasticity of the GPE phase. Additionally, manipulating the solvation/desolvation behavior of the Li+-glyme complex in the GPE facilitates ion conduction across the LPSCl-GPE interface. The resulting scalable CSE (area = 8 × 6 (cm × cm), thickness ~ 40 μm) can be assembled with a high-mass-loading LiNi0.7Co0.15Mn0.15O2 cathode (areal-mass-loading = 39 mg cm-2) and a graphite anode (negative (N)/positive (P) capacity ratio = 1.1) in order to fabricate an SSB full cell with bi-cell configuration. Under this constrained cell condition, the SSB full cell exhibits high volumetric energy density (480 Wh Lcell-1) and stable cyclability at 25 °C, far exceeding the values reported by previous CSE-based SSBs.

| S-EPMC10344856 | biostudies-literature

Understanding Interfaces at the Positive and Negative Electrodes on Sulfide-Based Solid-State Batteries

Project description: Not available

| S-EPMC10646897 | biostudies-literature

Uniform yolk-shell iron sulfide-carbon nanospheres for superior sodium-iron sulfide batteries.

Project description:Sodium-metal sulfide battery holds great promise for sustainable and cost-effective applications. Nevertheless, achieving high capacity and cycling stability remains a great challenge. Here, uniform yolk-shell iron sulfide-carbon nanospheres have been synthesized as cathode materials for the emerging sodium sulfide battery to achieve remarkable capacity of ∼ 545 mA h g(-1) over 100 cycles at 0.2 C (100 mA g(-1)), delivering ultrahigh energy density of ∼ 438 Wh kg(-1). The proven conversion reaction between sodium and iron sulfide results in high capacity but severe volume changes. Nanostructural design, including of nanosized iron sulfide yolks (∼ 170 nm) with porous carbon shells (∼ 30 nm) and extra void space (∼ 20 nm) in between, has been used to achieve excellent cycling performance without sacrificing capacity. This sustainable sodium-iron sulfide battery is a promising candidate for stationary energy storage. Furthermore, this spatially confined sulfuration strategy offers a general method for other yolk-shell metal sulfide-carbon composites.

| S-EPMC4846313 | biostudies-literature

Growth of lithium-indium dendrites in all-solid-state lithium-based batteries with sulfide electrolytes.

Project description:All-solid-state lithium-based batteries with inorganic solid electrolytes are considered a viable option for electrochemical energy storage applications. However, the application of lithium metal is hindered by issues associated with the growth of mossy and dendritic Li morphologies upon prolonged cell cycling and undesired reactions at the electrode/solid electrolyte interface. In this context, alloy materials such as lithium-indium (Li-In) alloys are widely used at the laboratory scale because of their (electro)chemical stability, although no in-depth investigations on their morphological stability have been reported yet. In this work, we report the growth of Li-In dendritic structures when the alloy material is used in combination with a Li6PS5Cl solid electrolyte and Li(Ni0.6Co0.2Mn0.2)O2 positive electrode active material and cycled at high currents (e.g., 3.8 mA cm-2) and high cathode loading (e.g., 4 mAh cm-2). Via ex situ measurements and simulations, we demonstrate that the irregular growth of Li-In dendrites leads to cell short circuits after room-temperature long-term cycling. Furthermore, the difference between Li and Li-In dendrites is investigated and discussed to demonstrate the distinct type of dendrite morphology.

| S-EPMC8630065 | biostudies-literature

Percolated Sulfide in Salt-Concentrated Polymer Matrices Extricating High-Voltage All-Solid-State Lithium-metal Batteries.

Project description:All-solid-state lithium-metal batteries (ASLMBs) are considered to be remarkably promising energy storage devices owing to their high safety and energy density. However, the limitations of current solid electrolytes in oxidation stability and ion transport properties have emerged as fundamental barriers in practical applications. Herein, a novel solid electrolyte is presented by in situ polymerization of salt-concentrated poly(ethylene glycol) diglycidyl ether (PEGDE) implanted with a three-dimensional porous L10 GeP2 S12 skeleton to mitigate these issues. The poly(PEGDE) endows more oxygen atoms to coordinate with Li+ , significantly lowering its highest occupied molecular orbital level. As a consequence, the electro-oxidation resistance of poly(PEGDE) exceeds 4.7 V versus Li+ /Li. Simultaneously, the three-dimensonal porous L10 GeP2 S12 skeleton provides a percolated pathway for rapid Li+ migration, ensuring a sufficient ionic conductivity of 7.7 × 10-4 S cm-1 at room temperature. As the bottlenecks are well solved, 4.5 V LiNi0.8 Mn0.1 Co0.1 O2 -based ASLMBs present fantastic cycle performance over 200 cycles with an average Coulombic efficiency exceeding 99.6% at room temperature.

| S-EPMC9443466 | biostudies-literature

Promoting favorable interfacial properties in lithium-based batteries using chlorine-rich sulfide inorganic solid-state electrolytes.

Project description:The use of inorganic solid-state electrolytes is considered a viable strategy for developing high-energy Li-based metal batteries. However, suppression of parasitic interfacial reactions and growth of unfavorable Li metal depositions upon cycling are challenging aspects and not yet fully addressed. Here, to better understand these phenomena, we investigate various sulfide inorganic solid electrolytes (SEs), i.e., Li7-xPS6-xClx (x = 0.6, 1.0, 1.3, 1.45, and 1.6), via ex situ and in situ physicochemical and electrochemical measurements. We found that the Cl distribution and the cooling process applied during the SE synthesis strongly influence the evolution of the Li|SE interface in terms of microstructure, interphase composition, and morphology. Indeed, for a SE with a moderate chlorine content (i.e., x = 1.3) and obtained via a slow cooling process after sintering, the Cl atoms are located on the surface of the SE grains as interconnected LiCl nanoparticles that form an extended LiCl-based framework. This peculiar microstructure facilitates the migration of the Cl ions to the Li|SE interface during electrochemical cycling, thus, favouring the formation of a LiCl-rich interphase layer capable of improving the battery cycling performances.

| S-EPMC8989881 | biostudies-literature

Cathode coating using LiInO<sub>2</sub>-LiI composite for stable sulfide-based all-solid-state batteries.

Project description:All-solid-state batteries with inorganic solid electrolytes are ideal to overcome the safety issues related to the flammable organic electrolyte in lithium ion batteries. Sulfide materials are promising inorganic electrolytes due to their high ionic conductivity and good elasticity. Nevertheless, their application is limited by their high reactivity and instability at the cathode/electrolyte (Li[Ni0.8Co0.15Al0.05]O2/75Li2S-22P2S5-3Li2SO4) interface. In this study, LiInO2 and LiInO2-LiI were introduced as new cathode coating materials to suppress such undesirable reactions. The LiInO2-LiI composite coating layer reduced the undesirable interfacial reactions and prevented the diffusion of S and P ions from the sulfide electrolyte to the oxide cathode. Moreover, the electrochemical properties of all-solid-state cells were improved by the cathode coating. The LiInO2-LiI-coated electrode presented better rate capability and lower impedance than the pristine and LiInO2-coated electrodes. Hence, the LiInO2-LiI composite coating was successful at improving the cathode stability while providing superior electrochemical properties.

| S-EPMC6543035 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data