Browse
Submit Data
Databases
API
Help

Dataset Information

22 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

High speed, complex wavefront shaping using the digital micro-mirror device.

ABSTRACT: Digital micro-mirror devices (DMDs) have been deployed in many optical applications. As compared to spatial light modulators (SLMs), they are characterized by their much faster refresh rates (full-frame refresh rates up to 32 kHz for binary patterns) compared to 120 Hz for most liquid crystal SLMs. DMDs however can only display binary, unipolar patterns and utilize temporal modulation to represent with excellent accuracy multiple gray-levels in display applications. We used the built-in time domain dynamic range representation of the DMD to project 8-bit complex-fields. With this method, we demonstrated 8-bit complex field modulation with a frame time of 38.4 ms (around 0.15 s for the entire complex-field). We performed phase conjugation by compensating the distortions incurred due to propagation through free-space and a scattering medium. For faster modulation speed, an electro-optic modulator was used in synchronization with the DMD in an amplitude modulation mode to create grayscale patterns with frame rate ~ 833 Hz with display time of only 1.2 ms instead of 38.4 ms for time multiplexing gaining a speed up by a factor of 32.

SUBMITTER: Ayoub AB

PROVIDER: S-EPMC8458445 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

High-gain and high-speed wavefront shaping through scattering media.

Project description:Wavefront shaping (WFS) is emerging as a promising tool for controlling and focusing light in complex scattering media. The shaping system's speed, the energy gain of the corrected wavefronts, and the control degrees of freedom (DOF) are the most important metrics for WFS, especially for highly scattering and dynamic samples. Despite recent advances, current methods suffer from trade-offs that limit satisfactory performance to only one or two of these metrics. Here, we report a WFS technique that simultaneously achieves high speed, high energy gain, and high control DOF. By combining photorefractive crystal-based analog optical phase conjugation (AOPC) and stimulated emission light amplification, our technique achieves an energy gain approaching unity, more than three orders of magnitude larger than conventional AOPC. The response time of ~10 μs with about 106 control modes corresponds to an average mode time of about 0.01 ns/mode, which is more than 50 times lower than some of the fastest WFS systems to date. We anticipate that this technique will be instrumental in overcoming the optical diffusion limit in photonics and translate WFS techniques to real-world applications.

| S-EPMC10275582 | biostudies-literature

Fast volumetric imaging with patterned illumination via digital micro-mirror device-based temporal focusing multiphoton microscopy.

Project description:Temporal focusing multiphoton microscopy (TFMPM) has the advantage of area excitation in an axial confinement of only a few microns; hence, it can offer fast three-dimensional (3D) multiphoton imaging. Herein, fast volumetric imaging via a developed digital micromirror device (DMD)-based TFMPM has been realized through the synchronization of an electron multiplying charge-coupled device (EMCCD) with a dynamic piezoelectric stage for axial scanning. The volumetric imaging rate can achieve 30 volumes per second according to the EMCCD frame rate of more than 400 frames per second, which allows for the 3D Brownian motion of one-micron fluorescent beads to be spatially observed. Furthermore, it is demonstrated that the dynamic HiLo structural multiphoton microscope can reject background noise by way of the fast volumetric imaging with high-speed DMD patterned illumination.

| S-EPMC4871077 | biostudies-other

Harnessing a multi-dimensional fibre laser using genetic wavefront shaping.

Project description:The multi-dimensional laser is a fascinating platform not only for the discovery and understanding of new higher-dimensional coherent lightwaves but also for the frontier study of the complex three-dimensional (3D) nonlinear dynamics and solitary waves widely involved in physics, chemistry, biology and materials science. Systemically controlling coherent lightwave oscillation in multi-dimensional lasers, however, is challenging and has largely been unexplored; yet, it is crucial for both designing 3D coherent light fields and unveiling any underlying nonlinear complexities. Here, for the first time, we genetically harness a multi-dimensional fibre laser using intracavity wavefront shaping technology such that versatile lasing characteristics can be manipulated. We demonstrate that the output power, mode profile, optical spectrum and mode-locking operation can be genetically optimized by appropriately designing the objective function of the genetic algorithm. It is anticipated that this genetic and systematic intracavity control technology for multi-dimensional lasers will be an important step for obtaining high-performance 3D lasing and presents many possibilities for exploring multi-dimensional nonlinear dynamics and solitary waves that may enable new applications.

| S-EPMC7450085 | biostudies-literature

Wavefront shaping with disorder-engineered metasurfaces.

Project description:Recently, wavefront shaping with disordered media has demonstrated optical manipulation capabilities beyond those of conventional optics, including extended volume, aberration-free focusing and subwavelength focusing. However, translating these capabilities to useful applications has remained challenging as the input-output characteristics of the disordered media (P variables) need to be exhaustively determined via O(P) measurements. Here, we propose a paradigm shift where the disorder is specifically designed so its exact input-output characteristics are known a priori and can be used with only a few alignment steps. We implement this concept with a disorder-engineered metasurface, which exhibits additional unique features for wavefront shaping such as a large optical memory effect range in combination with a wide angular scattering range, excellent stability, and a tailorable angular scattering profile. Using this designed metasurface with wavefront shaping, we demonstrate high numerical aperture (NA > 0.5) focusing and fluorescence imaging with an estimated ~2.2×108 addressable points in an ~8 mm field of view.

| S-EPMC5842956 | biostudies-literature

Optogenetic control of cell signaling pathway through scattering skull using wavefront shaping.

Project description:We introduce a non-invasive approach for optogenetic regulation in biological cells through highly scattering skull tissue using wavefront shaping. The wavefront of the incident light was systematically controlled using a spatial light modulator in order to overcome multiple light-scattering in a mouse skull layer and to focus light on the target cells. We demonstrate that illumination with shaped waves enables spatiotemporal regulation of intracellular Ca(2+) level at the individual-cell level.

| S-EPMC4543936 | biostudies-literature

Coherent Raman Generation Controlled by Wavefront Shaping.

Project description:We investigate the possibility of tailoring coherent Raman generated spectra via adaptive wavefront optimization. Our technique combines a spatial light modulator and a spectrometer providing a feedback loop. The algorithm is capable of controlling the Raman generation, producing broader spectra and an improved overall efficiency, and increasing the intensity of high-order sidebands. Moreover, by wavefront optimization we can extend the generated spectra towards the blue spectral region and increase the total power of generated sidebands. Mutual coherence and equal frequency separation of the multiple Raman sidebands are of interest for the synthesis of ultrashort light pulses with the total spectral bandwidth extending over ultraviolet, visible and near-infrared wavelengths.

| S-EPMC6367464 | biostudies-literature

On-chip wavefront shaping with dielectric metasurface.

Project description:Metasurfaces can be programmed for a spatial transformation of the wavefront, thus allowing parallel optical signal processing on-chip within an ultracompact dimension. On-chip metasurfaces have been implemented with two-dimensional periodic structures, however, their inherent scattering loss limits their large-scale implementation. The scattering can be minimized in single layer high-contrast transmitarray (HCTA) metasurface. Here we demonstrate a one-dimensional HCTA based lens defined on a standard silicon-on-insulator substrate, with its high transmission (<1 dB loss) maintained over a 200 nm bandwidth. Three layers of the HCTAs are cascaded for demonstrating meta-system functionalities of Fourier transformation and differentiation. The meta-system design holds potential for realizing on-chip transformation optics, mathematical operations and spectrometers, with applications in areas of imaging, sensing and quantum information processing.

| S-EPMC6686019 | biostudies-literature

Photon-efficient optical tweezers via wavefront shaping.

Project description:Optical tweezers enable noncontact trapping of microscale objects using light. It is not known how tightly it is possible to three-dimensionally (3D) trap microparticles with a given photon budget. Reaching this elusive limit would enable maximally stiff particle trapping for precision measurements on the nanoscale and photon-efficient tweezing of light-sensitive objects. Here, we customize the shape of light fields to suit specific particles, with the aim of optimizing trapping stiffness in 3D. We show, theoretically, that the confinement volume of microspheres held in sculpted optical traps can be reduced by one to two orders of magnitude. Experimentally, we use a wavefront shaping-inspired strategy to passively suppress the Brownian fluctuations of microspheres in every direction concurrently, demonstrating order-of-magnitude reductions in their confinement volumes. Our work paves the way toward the fundamental limits of optical control over the mesoscopic realm.

| S-EPMC11225778 | biostudies-literature

Wavefront shaping with nonlinear four-wave mixing.

Project description:Wavefront manipulations have enabled wide applications across many interdisciplinary fields ranging from optics and microwaves to acoustics. However, the realizations of such functional surfaces heavily rely on micro/nanofabrication to define the structured surfaces, which are fixed and only work within a limited spectrum. To address these issues, previous attempts combining tunable materials like liquid crystal or phase-change ones onto the metasurfaces have permitted extra tunability and working spectra, however, these additional layers bring in inevitable loss and complicate the fabrication. Here we demonstrate a fabrication-free tunable flat slab using a nonlinear four-wave mixing process. By wavefront-shaping the pump onto the flat slab, we can successfully tune the effective nonlinear refraction angle of the emitting FWM beams according to the phase-matching condition. In this manner, a focusing and a defocusing nonlinear of FWM beam through the flat slab have been demonstrated with a converging and a diverging pump wavefronts, respectively. Furthermore, a beam steering scheme over a 20° angle has been realized through a non-degenerate four-wave mixing process by introducing a second pump. These features open up a door to manipulating light propagation in an all-optical manner, paving the way to more functional and tunable flat slab devices in the applications of imaging and all-optical information.

| S-EPMC9935867 | biostudies-literature

Non-Invasive Imaging Through Scattering Medium by Using a Reverse Response Wavefront Shaping Technique.

Project description:Fundamental challenge of imaging through a scattering media has been resolved by various approaches in the past two decades. Optical wavefront shaping technique is one such method in which one shapes the wavefront of light entering a scattering media using a wavefront shaper such that it cancels the scattering effect. It has been the most effective technique in focusing light inside a scattering media. Unfortunately, most of these techniques require direct access to the scattering medium or need to know the scattering properties of the medium beforehand. Through the novel scheme presented on this paper, both the illumination module and the detection are on the same side of the inspected object and the imaging process is a real time fast converging operation. We model the scattering medium being a biological tissue as a matrix having mathematical properties matched to the physical and biological aspects of the sample. In our adaptive optics scheme, we aim to estimate the scattering function and thus to encode the intensity of the illuminating laser light source using DMD (Digital Micromirror Device) with an inverse scattering function of the scattering medium, such that after passing its scattering function a focused beam is obtained. We optimize the pattern to be displayed on the DMD using Particle Swarm Algorithm (PSO) which eventually help in retrieving a 1D object hidden behind the media.

| S-EPMC6706411 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data