Green Afterglow of Undoped SrAl2O4.
Ontology highlight
ABSTRACT:
SUBMITTER: Zhai BG
PROVIDER: S-EPMC8467732 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Undoped SrSO4 nanoplates were synthesized via the composite hydroxide-mediated approach. The products were characterized by means of X-ray diffractometry, scanning electron microscopy, X-ray energy-dispersive spectroscopy, X-ray photoelectron spectroscopy, photoluminescence (PL) spectroscopy, electron spin resonance technique, afterglow spectroscopy, and thermoluminescence dosimetry. The steady-state PL spectrum of undoped SrSO4 nanoplates can be deconvoluted into two distinct Gaussian bands centered at 2.97 eV (417.2 nm) and 2.56 eV (484.4 nm), respectively. The nature of the defect emissions is confirmed through the emission-wavelength-dependent PL decays as well as the excitation-wavelength-dependent PL decays. A cyan-colored afterglow from undoped SrSO4 nanoplates can be observed with naked eyes in the dark, and the afterglow spectrum of the undoped SrSO4 nanoplates exhibits a peak at about 492 nm (2.52 eV). The duration of the afterglow is measured to be 16 s. The thermoluminescence glow curve of the undoped SrSO4 nanoplates shows a peak at about 40.1 °C. The trapping parameters are determined with the peak shape method, the calculated value of the trap depth is 0.918 eV, and the frequency factor is 1.2 × 1014 s-1. Using density functional calculations, the band structures and densities of states of oxygen-deficient SrSO4 and strontium-deficient SrSO4 are presented. The mechanisms of the cyan-colored afterglow are discussed for undoped SrSO4, and the oxygen vacancies in SrSO4 are proposed to be the luminescence center of the afterglow.
| S-EPMC8153658 | biostudies-literature
Project description:In this study, we report highly efficient green phosphorescent organic light-emitting diodes (OLEDs) with ultra-thin emission layers (EMLs). We use tris[2-phenylpyridinato-C2,N]iridium(III) (Ir(ppy)3), a green phosphorescent dopant, for creating the OLEDs. Under systematic analysis, the peak external quantum efficiency (EQE) of an optimized device based on the ultra-thin EML structure is found to be approximately 24%. This result is highest EQE among ultra-thin EML OLEDs and comparable to the highest efficiency achieved by OLEDs using Ir(ppy)3 that are fabricated via conventional doping methods. Moreover, this result shows that OLEDs with ultra-thin EML structures can achieve ultra-high efficiency.
| S-EPMC8055988 | biostudies-literature
Project description:Near-infrared (NIR), particularly NIR-containing dual-/multi-mode afterglow, is very attractive in many fields of application, but it is still a great challenge to achieve such property of materials. Herein, we report a facile method to prepare green and NIR dual-mode afterglow of carbon dots (CDs) through in situ embedding o-CDs (being prepared from o-phenylenediamine) into cyanuric acid (CA) matrix (named o-CDs@CA). Further studies reveal that the green and NIR afterglows of o-CDs@CA originate from thermal activated delayed fluorescence (TADF) and room temperature phosphorescence (RTP) of o-CDs, respectively. In addition, the formation of covalent bonds between o-CDs and CA, and the presence of multiple fixation and rigid effects to the triplet states of o-CDs are confirmed to be critical for activating the observed dual-mode afterglow. Due to the shorter lifetime and insensitiveness to human vision of the NIR RTP of o-CDs@CA, it is completely covered by the green TADF during directly observing. The NIR RTP signal, however, can be readily captured if an optical filter (cut-off wavelength of 600 nm) being used. By utilizing these unique features, the applications of o-CDs@CA in anti-counterfeiting and information encryption have been demonstrated with great confidentiality. Finally, the as-developed method was confirmed to be applicable to many other kinds of CDs for achieving or enhancing their afterglow performances.
| S-EPMC8446126 | biostudies-literature
Project description:Within the milieu of immune dysfunction, reactive oxygen species (ROS) play a pivotal role in inducing immunogenic cell death (ICD), countering the dysregulated tumor microenvironment. However, the administration of ROS at indiscriminate dosages may provoke deleterious immune responses. Therefore, precise regulation of ROS production is crucial to achieve efficacious therapeutic outcomes. We engineered an innovative afterglow nanosystem which is capable of real-time monitoring of ROS levels. Our findings reveal that Ru/CYQ@CPPO exhibits a markedly enhanced and prolonged afterglow luminescence, coupled with superior singlet oxygen (O2) generation, compared to the commercially available indocyanine green (ICG). In vitro studies demonstrated that Ru/CYQ@CPPO exhibits remarkable efficacy in photodynamic therapy (PDT) under irradiation at a wavelength of 450 nm. Furthermore, a significant correlation (R 2 = 0.987) was observed between the intensity of afterglow luminescence and the rate of cancer cell inhibition.
| S-EPMC11259105 | biostudies-literature
Project description:This article explains the behavior of afterglow luminescence using the trap bag concept, in which a constant phosphor dose contains a presumed bag with the ability to capture or release electrons through its opening. Luminescence is emitted as the bag releases the captured electrons. The electron-holding capacity is determined by the irradiation conditions, the width of the opening, and the electron activation; these factors are inherent properties of the long persistent luminescence (PLUM) dose and are affected by the thermal status. During the afterglow stage, higher temperatures may result in a wider opening and increased activation of electrons released from the bag, thus creating a higher light intensity and leading to the quicker exhaustion of the electrons within. In contrast, the opposite phenomenon will occur at lower temperatures. This article provides a detailed explanation of the trap bag concept at various thermal statuses and provides a method for delaying the afterglow peak profile through temperature change. Experimental tests were performed to confirm the proposed concept.
| S-EPMC5559600 | biostudies-other
Project description:Pure organic luminogens with long-persistent luminescence have been extensively studied, on account of their fundamental research significance and diverse utilizations in anticounterfeiting, bioimaging, encryption, organic light-emitting diodes, chemo-sensing, etc. However, time-dependent color-tunable afterglow is rarely reported, especially for single-component materials. In this work, we reported an organic luminogen with time-dependent afterglow, namely, benzoyleneurea (BEU), with multiple persistent room-temperature phosphorescence (p-RTP) and thermally activated delayed fluorescence (TADF) in single crystals. While the lifetime of TADF is relatively short (~1.2 ms), those for p-RTP are as long as around 369~754 ms. The comparable but different decay rates of diversified p-RTP emissions endow BEU crystals with obvious time-dependent afterglow. The existence of multiple emissions can be reasonably illustrated by the clustering-triggered emission (CTE) mechanism. Single-crystal structure illustrates that the combination of benzene ring and nonconventional chromophores of ureide helps facilitate divergent intermolecular interactions, which contribute to the formation of varying emissive species. Moreover, its methyl- and chloro-substituted derivatives show similar multiple p-RTP emissions. However, no time-dependent afterglows are observed in their crystals, due to the highly approaching lifetimes. The afterglow color variation of BEU crystals grants its applications in advanced anticounterfeiting field and information encryption.
| S-EPMC8422276 | biostudies-literature
Project description:Unlike the widely studied ReFeAsO series, the newly discovered iron-based superconductor ThFeAsN exhibits a remarkably high critical temperature of 30 K, without chemical doping or external pressure. Here we investigate in detail its magnetic and superconducting properties via muon-spin rotation/relaxation and nuclear magnetic resonance techniques and show that ThFeAsN exhibits strong magnetic fluctuations, suppressed below ~35 K, but no magnetic order. This contrasts strongly with the ReFeAsO series, where stoichiometric parent materials order antiferromagnetically and superconductivity appears only upon doping. The ThFeAsN case indicates that Fermi-surface modifications due to structural distortions and correlation effects are as important as doping in inducing superconductivity. The direct competition between antiferromagnetism and superconductivity, which in ThFeAsN (as in LiFeAs) occurs at already zero doping, may indicate a significant deviation of the s-wave superconducting gap in this compound from the standard s ± scenario.Exploring the interplay between the superconducting gap and the antiferromagnetic phase in Fe-based superconductors remains an open issue. Here, the authors show that Fermi-surface modifications by means of structural distortions and correlation effects are as important as doping in inducing superconductivity in undoped ThFeAsN.
| S-EPMC5537253 | biostudies-other
Project description:Luminescent metal-organic frameworks (MOFs) have received much attention due to their wide structural tunability and potential application in light-emitting diodes, biological imaging and chemical sensors. However, successful examples of long-persistent afterglow MOFs are still quite limited to date. In this work, we report that two types of Zn-terephthalate (TPA) MOFs (namely [Zn(TPA)(DMF)] (1-DMF) and MOF-5) could exhibit an obvious room-temperature afterglow emission with a time-resolved luminescence lifetime as high as 0.47 seconds. The phosphorescence-based afterglow was also highly sensitive to the temperature, and the reversible emission intensity could be recycled under high/low temperatures. Moreover, both 1-DMF and MOF-5 showed highly tunable afterglow phosphorescence colors (from cyan to yellow and from green to red, respectively) upon treatment with pyridine solution. The fluorescence/phosphorescence emission color of MOF-5 can be reversibly switched due to the addition and removal of a pyridine guest to and from the host nanochannel, as shown in both experimental and computational studies. Therefore, this work not only shows a facile method to develop MOF-based long-afterglow materials at room temperature, but also presents a strategy to tune their phosphorescence in a wide range based on host-guest interactions.
| S-EPMC6016333 | biostudies-literature
Project description:The modulation of the properties of emission from multiple emission states in a single-component organic luminescent material is highly desirable in data anticounterfeiting, information storage, and bioapplications. Here, a single-component luminescent organic crystal of difluoroboron diphenyl β-diketonate with controllable multiple emission colors is successfully reported. The temperature-dependent luminescence experiments supported by high-level theoretical calculations demonstrate that the ratio of the fluorescence between the monomer and excimer and the phosphorescence maxima of the excimer can be effectively regulated. In addition, the temperature-dependent fluorescence and afterglow dual-emission color changes provide a new strategy for the design of highly accurate double-checked temperature sensors.
| S-EPMC8900125 | biostudies-literature
Project description:Afterglow luminescence is an internal luminescence pathway that occurs after photo-excitation, holds great promise for non-background molecular imaging in vivo, but suffer from poor quantitative ability owing to luminescent attenuation over time. Moreover, the inert structure and insufficient reactive sites of current afterglow materials make it hard to design activatable afterglow probes for specific detection. Here, we report a ratiometric afterglow luminescent nanoplatform to customize various activatable afterglow probes for reliable quantification and molecular imaging of specific analytes, such as NO, ONOO- or pH. Notably, these afterglow probes can not only address the attenuation of afterglow intensity and eliminate the interference of factors (e.g., laser power, irradiation time, and exposure time), but also significantly improve the imaging reliability in vivo and signal-to-background ratios (~1200-fold), both of which enable more reliable quantitative analysis in biological systems. Moreover, as a proof-of-concept, we successfully design an NO-responsive ratiometric afterglow nanoprobe, RAN1. This nanoprobe can monitor the fluctuations of intratumoral NO, as a biomarker of macrophage polarization, making it possible to real-time dynamically evaluate the degree cancer immunotherapy, which provides a reliable parameter to predict the immunotherapeutic effect.
| S-EPMC9039063 | biostudies-literature