Structural Insight into La0.5Ca0.5Mn0.5Co0.5O3 Decomposition in the Methane Combustion Process.
Ontology highlight
ABSTRACT:
SUBMITTER: Nikolaeva O
PROVIDER: S-EPMC8468899 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Through computational calculations, CuO(001) has been identified as an active surface for methane oxidation. Experimental validation with CuO nanobelts comprised of predominantly (001) surfaces has been performed and it is confirmed that the performance of such nanobelts is much higher than normal nanoparticles and nanowires. First principle calculations further clarified that two-coordinated oxygen plays a key role for methane adsorption and oxidation.
| S-EPMC6176823 | biostudies-literature
Project description:The aim of this study was to obtain nanocrystalline mixed metal-oxide-ZrO? catalysts via a sonochemically-induced preparation method. The effect of a stabiliser's addition on the catalyst parameters was investigated by several characterisation methods including X-ray Diffraction (XRD), nitrogen adsorption, X-ray fluorescence (XRF), scanning electron microscopy (SEM) equipped with energy dispersive X-ray spectrometer (EDS), transmission electron microscopy (TEM) and µRaman. The sonochemical preparation method allowed us to manufacture the catalysts with uniformly dispersed metal-oxide nanoparticles at the support surface. The catalytic activity was tested in a methane combustion reaction. The activity of the catalysts prepared by the sonochemical method was higher than that of the reference catalysts prepared by the incipient wetness method without ultrasonic irradiation. The cobalt and chromium mixed zirconia catalysts revealed their high activities, which are comparable with those presented in the literature.
| S-EPMC5535240 | biostudies-literature
Project description:Plasma-assisted combustion is a promising approach to achieve fast ignition and highly efficient combustion. In this work, methane-air nanosecond pulsed dielectric barrier discharge plasma-assisted combustion is numerically investigated by combining a homemade plasma model with the combustion model of software CHEMKIN-PRO. Effects of varying applied voltage amplitudes on the characteristic parameters of the plasma-assisted planar shear flow combustion as well as the reaction pathway maps of not only the nanosecond pulsed dielectric barrier discharge plasma but also the combustions without and with plasma assistance are systematically illustrated and analyzed. The simulation results indicate that under the combined action of increasing electric field intensity and increasing charged particle densities, the peak value of the discharge current density increases, and the peak time of the discharge current density is brought forward with the increase of the applied voltage amplitude. The temperature reaches its peak value earlier in the methane-air combustion with plasma assistance than without plasma assistance. The maximum temperature reduces to around 1900 K when the applied voltage amplitude is higher than 11 kV. There are emerging pathways to generate hydrocarbons C2H4 and C2H2 in the plasma-assisted combustion, the reactions of CH4 on CH and C2H on H2, respectively. The reactions involving active species such as H play a significant role in the plasma-assisted combustion, which causes an obvious decrease in the densities of these active species with plasma assistance.
| S-EPMC7745419 | biostudies-literature
Project description:Non-oxidative methane dehydroaromatization is a promising reaction to directly convert natural gas into aromatic hydrocarbons and hydrogen. Commercialization of this technology is hampered by rapid catalyst deactivation because of coking. A novel approach is presented involving selective oxidation of coke during methane dehydroaromatization at 700 °C. Periodic pulsing of oxygen into the methane feed results in substantially higher cumulative product yield with synthesis gas; a H2 /CO ratio close to two is the main side-product of coke combustion. Using 13 C isotope labeling of methane it is demonstrated that oxygen predominantly reacts with molybdenum carbide species. The resulting molybdenum oxides catalyze coke oxidation. Less than one-fifth of the available oxygen reacts with gaseous methane. Combined with periodic regeneration at 550 °C, this strategy is a significant step forward, towards a process for converting methane into liquid hydrocarbons.
| S-EPMC5132063 | biostudies-literature
Project description:Here, we present the low-temperature (∼600 °C) solution combustion method for the fabrication of CoFe2O4, NiFe2O4, and Co0.5Ni0.5Fe2O4 nanoparticles (NPs) of 12-64 nm range in pure cubic spinel structure, by adjusting the oxidant (nitrate ions)/reductant (glycine) ratio in the reaction mixture. Although nitrate ions/glycine (N/G) ratios of 3 and 6 were used for the synthesis, phase-pure NPs could be obtained only for the N/G ratio of 6. For the N/G ratio 3, certain amount of Ni2+ cations was reduced to metallic nickel. The NH3 gas generated during the thermal decomposition of the amino acid (glycine, H2NCH2COOH) induced the reduction reaction. X-ray diffraction (XRD), Raman spectroscopy, vibrating sample magnetometry, and X-ray photoelectron spectroscopy techniques were utilized to characterize the synthesized materials. XRD analyses of the samples indicate that the Co0.5Ni0.5Fe2O4 NPs have lattice parameter larger than that of NiFe2O4, but smaller than that of CoFe2O4 NPs. Although the saturation magnetization (M s) of Co0.5Ni0.5Fe2O4 NPs lies in between the saturation magnetization values of CoFe2O4 and NiFe2O4 NPs, high coercivity (H c, 875 Oe) of the NPs indicate their hard ferromagnetic behavior. Catalytic behavior of the fabricated spinel NPs revealed that the samples containing metallic Ni are active catalysts for the degradation of 4-nitrophenol in aqueous medium.
| S-EPMC6644305 | biostudies-literature
Project description:Sheaf-like CeO2 (CeO2-S) in microscale was prepared by the hydrothermal method, and then etched with KOH aiming to obtain an imperfect fluorite structure (CeO2-SK) with high content of oxygen vacancies and oxygen mobility. With CeO2-S and CeO2-SK as supports respectively, a modified colloidal deposition method was employed to obtain Pd/CeO2 catalysts for being used in lean methane combustion. According to the inductively coupled plasma (ICP), N2 physisorption and scanning electron microscopy (SEM) results, the Pd supported catalysts are very similar in their Pd loading, surface area and morphologies. SEM and transmission electron microscopy (TEM) results revealed various nanorods exposed CeO2 (110) and (100) facets on Pd/CeO2-SK surface after KOH etching. Raman spectra and H2-temperature programmed reduction (H2-TPR) results indicated that Pd/CeO2-SK catalyst has a much higher content of catalytic active PdO species than Pd/CeO2-S catalyst. It was also found that the catalytic performance of Pd/CeO2 in lean methane combustion depends greatly upon the exposing crystal planes and oxygen vacancies content of sheaf-like CeO2, and Pd/CeO2-SK exhibits higher activity than Pd/CeO2-S. The larger amount of CeO2 (110) and (100) planes on Pd/CeO2-SK surface can enhance the formation of oxygen vacancies, active Pd species and migration of lattice oxygen, which all evidently improve the redox ability and catalytic activity of the Pd/CeO2-SK catalysts in lean methane combustion.
| S-EPMC7022713 | biostudies-literature
Project description:Meta analysis of transcriptome to reveal aging-related transcritionl alterations in zebrafish heart and provide candidate genes for development of model of premature cardiac aging
2020-06-30 | GSE143346 | GEO
Project description:To study the combustion process of fuel in the microwave plasma torch, we designed a butane microwave plasma device exploiting a tungsten rod as an electrode. Through analysis of the image record by high-speed camera, we found that the discharge of butane microwave plasma torch is a cyclic process at atmospheric pressure at a frequency of around 100 Hz. During the discharge, the active particles continuously diffuse from the electrode to the outside like the bloom of the flower. Then, the variation of plasma torch of jet height and temperature with microwave power is obtained. In addition, we studied the effects of different butane flow rates on the plasma torch. The results illustrate that excessive butane will lead to carbon deposition on the electrode. All in all, this work provides a new understanding of the combustion of the microwave plasma torch, which is conducive to the further development of microwave plasma in the fields of waste gas treatment, fuel combustion, and plasma engine.
| S-EPMC8741766 | biostudies-literature
Project description:By using a mimicked heating with ex-situ liquid nitrogen flash freezing method, multi-scale structural evolution behaviors of normal maize starch (NMS) and waxy maize starch (WMS) during gelatinization process were studied. The results from SEM, X-ray diffraction (XRD), FTIR/solid state NMR spectroscopy and small angle X-ray scattering (SAXS) showed that NMS and WMS exhibited differently structural evolution behavior during gelatinization process. As the temperature increase, the proportion of the NMS granules with cavity gradually increased, while after heating beyond (peak gelatinization temperature (Tp) + conclusion gelatinization temperature (Tc))/2 the disappearance of starch granule integrity occurred for WMS. The relative crystallinity of NMS declined from 32.8 to 15.26% gradually, as that of WMS declined from 42.43 to 13.09% with a sharply descent when heated beyond (Tp + Tc)/2. The loss of short-range order structure of NMS and WMS showed same trends according to FTIR and NMR. Semicrystalline lamellae of NMS became thinner gradually while that of WMS showed an apparently narrowing after heating beyond (Tp + Tc)/2. These results suggest that the destruction of double helix in amylopectin structure had greatly influence on the larger scale structure of starch samples. This strategy is important for thorough understanding and profiting starch-based food processing.Supplementary informationThe online version contains supplementary material available at 10.1007/s13197-022-05520-2.
| S-EPMC9525508 | biostudies-literature
Project description:A central challenge in systems biology today is to understand the network of interactions among biomolecules and, especially, the organizing principles underlying such networks. Recent analysis of known networks has identified small motifs that occur ubiquitously, suggesting that larger networks might be constructed in the manner of electronic circuits by assembling groups of these smaller modules. Using a unique process-based approach to analyzing such networks, we show for two cell-cycle networks that each of these networks contains a giant backbone motif spanning all the network nodes that provides the main functional response. The backbone is in fact the smallest network capable of providing the desired functionality. Furthermore, the remaining edges in the network form smaller motifs whose role is to confer stability properties rather than provide function. The process-based approach used in the above analysis has additional benefits: It is scalable, analytic (resulting in a single analyzable expression that describes the behavior), and computationally efficient (all possible minimal networks for a biological process can be identified and enumerated).
| S-EPMC2890799 | biostudies-other