PM2.5 Pollutant Concentrations in Greenspaces of Nanjing Are High but Can Be Lowered with Environmental Planning.
Ontology highlight
ABSTRACT:
SUBMITTER: Yang B
PROVIDER: S-EPMC8470726 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Indoor fine particulate matter (PM2.5) is important since people spend most of their time indoors. However, knowledge of the spatiotemporal variations of indoor PM2.5 concentrations within a city is limited. In this study, the spatiotemporal distributions of indoor PM2.5 levels in Nanjing, China were modeled by the multizone airflow and contaminant transport program (CONTAM), based on the geographically distributed residences, human activities, and outdoor PM2.5 concentrations. The accuracy of the CONTAM model was verified, with a good agreement between the model simulations and measurements (r = 0.940, N = 110). Two different scenarios were considered to examine the building performance and influence of occupant behaviors. Higher PM2.5 concentrations were observed under the scenario when indoor activities were considered. Seasonal variability was observed in indoor PM2.5 levels, with the highest concentrations occurring in the winter and the lowest occurring in the summer. Building characteristics have a significant effect on the spatial distribution of indoor PM2.5 concentrations, with multistory residences being more vulnerable to outdoor PM2.5 infiltration than high-rise residences. The overall population exposure to PM2.5 in Nanjing was estimated. It would be overestimated by 16.67% if indoor exposure was not taken into account, which would lead to a bias in the health impacts assessment.
| S-EPMC6339030 | biostudies-literature
Project description:Exposure to fine particulate matter (PM2.5) remains a worldwide public health issue. However, epidemiological studies on the chronic health impacts of PM2.5 in the developing countries are hindered by the lack of monitoring data. Despite the recent development of using satellite remote sensing to predict ground-level PM2.5 concentrations in China, methods for generating reliable historical PM2.5 exposure, especially prior to the construction of PM2.5 monitoring network in 2013, are still very rare. In this study, a high-performance machine-learning model was developed directly at monthly level to estimate PM2.5 levels in North China Plain. We developed a random forest model using the latest Multi-angle implementation of atmospheric correction (MAIAC) aerosol optical depth (AOD), meteorological parameters, land cover and ground PM2.5 measurements from 2013 to 2015. A multiple imputation method was applied to fill the missing values of AOD. We used 10-fold cross-validation (CV) to evaluate model performance and a separate time period, January 2016 to December 2016, was used to validate our model's capability of predicting historical PM2.5 concentrations. The overall model CV R2 and relative prediction error (RPE) were 0.88 and 18.7%, respectively. Validation results beyond the modeling period (2013-2015) shown that this model can accurately predict historical PM2.5 concentrations at the monthly (R2?=?0.74, RPE?=?27.6%), seasonal (R2?=?0.78, RPE?=?21.2%) and annual (R2?=?0.76, RPE?=?16.9%) level. The annual mean predicted PM2.5 concentration from 2013 to 2016 in our study domain was 67.7 ?g/m3 and Southern Hebei, Western Shandong and Northern Henan were the most polluted areas. Using this computationally efficient, monthly and high-resolution model, we can provide reliable historical PM2.5 concentrations for epidemiological studies on PM2.5 health effects in China.
| S-EPMC6690389 | biostudies-literature
Project description:Air pollution has emerged as a significant health, environmental, economic, and social problem all over the world. In this study, geospatial technologies coupled with a LUR (Land Use Regression) approach were applied to assess the spatial-temporal distribution of fine particulate (PM2.5). In-situ observations of air pollutants from ground monitoring stations from 2016-2018 were used as dependent variables, while the land-use/land cover, a NDVI (Normalized Difference Vegetation Index) from a MODIS sensors, and meteorology data allocations surrounding the monitoring stations from 0.25-5 km buffer ranges were collected as spatial predictors from GIS and remote sensing databases. A linear regression method was developed for the LUR model and 10-fold cross-validation was used to assess the model robustness. The R2 model obtained was 56% for DKI Jakarta, Indonesia, and 83% for Taipei Metropolis, Taiwan. According to the results of the PM2.5 model, the essential predictors for DKI Jakarta were influenced by temperature, NDVI, humidity, and residential area, while those for the Taipei Metropolis region were influenced by PM10, NO2, SO2, UV, rainfall, spring, main road, railroad, airport, proximity to airports, mining areas, and NDVI. The validation of the results of the estimated PM2.5 distribution use 10-cross validation with indicated R2 values of 0.62 for DKI Jakarta and 0.84 for Taipei Metropolis. The results of cross-validation show the strength of the model.
| S-EPMC6950409 | biostudies-literature
Project description:Although fine particulate matter with a diameter of <2.5 μm (PM2.5) has a greater negative impact on human health than particulate matter with a diameter of <10 μm (PM10), measurements of PM2.5 have only recently been performed, and the spatial coverage of these measurements is limited. Comprehensively assessing PM2.5 pollution levels and the cumulative health effects is difficult because PM2.5 monitoring data for prior time periods and certain regions are not available. In this paper, we propose a promising approach for robustly predicting PM2.5 concentrations. In our approach, a generalized additive model is first used to quantify the non-linear associations between predictors and PM2.5, the bagging method is used to sample the dataset and train different models to reduce the bias in prediction, and the variogram for the daily residuals of the ensemble predictions is then simulated to improve our predictions. Shandong Province, China, is the study region, and data from 96 monitoring stations were included. To train and validate the models, we used PM2.5 measurement data from 2014 with other predictors, including PM10 data, meteorological parameters, remote sensing data, and land-use data. The validation results revealed that the R² value was improved and reached 0.89 when PM10 was used as a predictor and a kriging interpolation was performed for the residuals. However, when PM10 was not used as a predictor, our method still achieved a CV R² value of up to 0.86. The ensemble of spatial characteristics of relevant factors explained approximately 32% of the variance and improved the PM2.5 predictions. The spatiotemporal modeling approach to estimating PM2.5 concentrations presented in this paper has important implications for assessing PM2.5 exposure and its cumulative health effects.
| S-EPMC5451999 | biostudies-literature
Project description:Bisphenol A (BPA) as a pervasive endocrine-disrupting compound (EDC) has been shown to cause multiple detrimental effects including cardiovascular disorders, pregnancy complications, obesity, glucose metabolism disorders, and reproductive toxicity even at a concentration as low as tolerable daily intake (TDI) (4 μg/kg/day). In the present study, a novel ultra-sensitive, electrochemical aptasensor was designed using a screen-printed carbon electrode (SPCE) modified by gold nanoparticles (Au NPs) conjugated to thiolated aptamers for accurate determination of BPA in biological, industrial and environmental samples. To characterize the electrochemical properties of the aptasensor, cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) were implemented. Detection of BPA was also performed through differential pulse voltammetry (DPV) in [Fe(CN)6]3-/4- electrolyte solution. Under optimum condition, the present electrochemical aptasensor demonstrated an outstanding linear response in the concentration range of 1 pM to 10 nM with a remarkably low limit of detection of 0.113 pM. Due to the superb affinity between anti-BPA aptamers and BPA molecules, the designed aptasensor did not show any significant interaction with other analytes in real samples. Also, fabricated biosensor remained perfectly stable in long-term storage. The analytical results of the fabricated aptasensor are well compatible with those obtained by the ELISA method, indicating the trustworthiness and reasonable accuracy of the application of aptasensor in real samples. Overall, the proposed aptasensor would be a credible and economical method of precise, reproducible, and highly selective detection of minimum levels of BPA in food containers and clinical samples. This would be a promising strategy to enhance the safety of food products and reduce the risk of BPA daily exposure.
| S-EPMC7498542 | biostudies-literature
Project description:Estimates of daily air pollution concentrations with complete spatial and temporal coverage are important for supporting epidemiologic studies and health impact assessments. While numerous approaches have been developed for modeling air pollution, they typically only consider each pollutant separately. We describe a spatial multipollutant data fusion model that combines monitoring measurements and chemical transport model simulations that leverages dependence between pollutants to improve spatial prediction. For the contiguous United States, we created a data product of daily concentration for 12 pollutants (CO, NOx, NO2, SO2, O3, PM10, and PM2.5 species EC, OC, NO3, NH4, SO4) during the period 2005 to 2014. Out-of-sample prediction showed good performance, particularly for daily PM2.5 species EC (R2 = 0.64), OC (R2 = 0.75), NH4 (R2 = 0.84), NO3 (R2 = 0.73), and SO4 (R2 = 0.80). By employing the integrated nested Laplace approximation (INLA) for Bayesian inference, our approach also provides model-based prediction error estimates. The daily data product at 12km spatial resolution will be publicly available immediately upon publication. To our knowledge this is the first publicly available data product for major PM2.5 species and several gases at this spatial and temporal resolution.
| S-EPMC9187197 | biostudies-literature
Project description:PM2.5, which refers to fine particles with an equivalent aerodynamic diameter of less than or equal to 2.5 µm, can not only affect air quality but also endanger public health. Nevertheless, the spatial distribution of PM2.5 is not well understood in data-poor regions where monitoring stations are scarce. Therefore, we constructed a random forest (RF) model and a bagging algorithm model based on ground-monitored PM2.5 data, aerosol optical depth (AOD) and meteorological data, and auxiliary geographical variables to accurately estimate the spatial distribution of PM2.5 concentrations in Xinjiang during 2015-2020 at a resolution of 1 km. Through 10-fold cross-validation (CV), the RF model and bagging algorithm model were verified and compared. The results showed the following: (1) The RF model achieved better model performance and thus can be used to estimate the PM2.5 concentration at a relatively high resolution. (2) The PM2.5 concentrations were high in southern Xinjiang and low in northern Xinjiang. The high values were concentrated mainly in the Tarim Basin, while most areas of northern Xinjiang maintained low PM2.5 levels year-round. (3) The PM2.5 values in Xinjiang showed significant seasonality, with the seasonally averaged concentrations decreasing as follows: winter (71.95 µg m-3) > spring (64.76 µg m-3) > autumn (46.01 µg m-3) > summer (43.40 µg m-3). Our model provides a way to monitor air quality in data-scarce places, thereby advancing efforts to achieve sustainable development in the future.
| S-EPMC8976473 | biostudies-literature
Project description:High concentrations of particulate matter (PM2.5) and frequent air pollution episodes in Beijing have attracted widespread attention. This paper utilizes data from the new air pollution network in China to examine the current spatial and temporal variability of PM2.5 at 12 monitoring sites in Beijing over a recent 2-year period (April 2013) to March 2015). The long term (2-year) average concentration was 83 µg·m-3, well above Chinese and international standards. Across the region, annual average concentrations varied by 20 µg·m-3 (25% of the average level), with lower levels in suburban areas compared to periurban and urban areas, which had similar concentrations. The spatial variation in PM2.5 concentrations was associated with several land use and economic variables, including the fraction of vegetated land and building construction activity, which together explained 71% of the spatial variation. Daily air quality was characterized as "polluted" (above 75 µg·m-3) on 36 to 47% of days, depending on site. There were 77 pollution episodes during the study period (defined as two or more consecutive days with Beijing-wide 24-hour average concentrations over 75 µg·m-3), and 2 to 5 episodes occurred each month, including summer months. The longest episode lasted 9 days and daily concentrations exceeded 450 µg·m-3. Daily PM2.5 levels were autocorrelated (rlag1 = 0.516) and associated with many meteorological variables, including barometric pressure, relative humidity, hours of sunshine, surface and ambient temperature, precipitation and scavenging coefficient, and wind direction. Parsimonious models with meteorological and autoregressive terms explained over 60% of the variation in daily PM2.5 levels. The first autoregressive term and hours of sunshine were the most important variables in these models, however, the latter variable is PM2.5-dependent and thus not an explanatory variable. The present study can serve as a baseline to compare the improved air quality in Beijing expected in future years.
| S-EPMC5650241 | biostudies-literature
Project description:Maternal exposure to ambient air pollution has increasingly been linked to congenital heart defects (CHDs). The objective of this study was to evaluate whether high levels of maternal exposure to PM2.5 and PM10 are related to increased risk of CHDs in Wuhan, China. We conducted a cohort study with a total of 105,988 live-born infants, stillbirths, and fetal deaths. The study included mothers living in the urban district of Wuhan during pregnancy over the 2-year period from 10 June 2011 to 9 June 2013. For each study participant, we assigned 1-month and 1-week averages of PM10 and PM2.5 exposure based on measurements obtained from the nearest exposure monitor to the living residence of mothers during their early pregnancy period. Logistic regression analyses were conducted to calculate the adjusted odds ratios (aORs) and 95% confidence intervals (CI) for the association between exposure to these ambient air pollutants during early pregnancy and CHDs. We observed an increased risk of CHDs, particularly ventricular septal defect (VSD), with increasing PM2.5 exposure. Using 1-week averages, we also observed significant monotonically increasing associations between PM2.5 exposure during weeks 7-10 of pregnancy and risk of VSD, with aORs ranging from 1.11 to 1.17 (95% CI: 1.02-1.20, 1.03-1.22, 1.05-1.24, and 1.08-1.26 separately) per a 10 μg/m(3) change in PM2.5 concentration. Our study contributes to the small body of knowledge regarding the association between in utero exposure to air pollution and CHDs, but confirmation of these associations will be needed in future studies.
| S-EPMC4913168 | biostudies-literature
Project description:Long-term PM2.5 exposure has been associated with various adverse health outcomes. However, most ground monitors are located in urban areas, leading to a potentially biased representation of true regional PM2.5 levels. To facilitate epidemiological studies, accurate estimates of the spatiotemporally continuous distribution of PM2.5 concentrations are important. Satellite-retrieved aerosol optical depth (AOD) has been increasingly used for PM2.5 concentration estimation due to its comprehensive spatial coverage. Nevertheless, previous studies indicated that an inherent disadvantage of many AOD products is their coarse spatial resolution. For instance, the available spatial resolutions of the Moderate Resolution Imaging Spectroradiometer (MODIS) and the Multiangle Imaging SpectroRadiometer (MISR) AOD products are 10 and 17.6 km, respectively. In this paper, a new AOD product with 1 km spatial resolution retrieved by the multi-angle implementation of atmospheric correction (MAIAC) algorithm based on MODIS measurements was used. A two-stage model was developed to account for both spatial and temporal variability in the PM2.5-AOD relationship by incorporating the MAIAC AOD, meteorological fields, and land use variables as predictors. Our study area is in the southeastern US centered at the Atlanta metro area, and data from 2001 to 2010 were collected from various sources. The model was fitted annually, and we obtained model fitting R2 ranging from 0.71 to 0.85, mean prediction error (MPE) from 1.73 to 2.50 ?g m-3, and root mean squared prediction error (RMSPE) from 2.75 to 4.10 ?g m-3. In addition, we found cross-validation R2 ranging from 0.62 to 0.78, MPE from 2.00 to 3.01 ?gm-3, and RMSPE from 3.12 to 5.00 ?gm-3, indicating a good agreement between the estimated and observed values. Spatial trends showed that high PM2.5 levels occurred in urban areas and along major highways, while low concentrations appeared in rural or mountainous areas. Our time-series analysis showed that, for the 10-year study period, the PM2.5 levels in the southeastern US have decreased by ?20 %. The annual decrease has been relatively steady from 2001 to 2007 and from 2008 to 2010 while a significant drop occurred between 2007 and 2008. An observed increase in PM2.5 levels in year 2005 is attributed to elevated sulfate concentrations in the study area in warm months of 2005.
| S-EPMC5619667 | biostudies-literature