Mechanical analysis of non-Newtonian nanofluid past a thin needle with dipole effect and entropic characteristics.
Ontology highlight
ABSTRACT:
SUBMITTER: Ramzan M
PROVIDER: S-EPMC8481475 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:This work addresses the ability to manage the distribution of heat transmission for fluid flow occurs upon a paraboloid thin shaped hot needle by using hybrid nanoparticles containing Copper Oxide (CuO) and Silver (Ag) with water as pure fluid. The needle is placed horizontally in nanofluid with an application of Hall current and viscous dissipation. The popular Buongiorno model has employed in the current investigation in order to explore the impact of Brownian and thermophoretic forces exerted by the fluid. The modeled equations with boundary conditions are transformed to non-dimensional form by incorporating a suitable group of similarity variables. This set of ordinary differential equations is then solved by employing homotopy analysis method (HAM). After detail study of the current work, it has established that the flow of fluid reduces with growth in magnetic effects and volume fractions of nanoparticles. Thermal characteristics increase with augmentation of Eckert number, magnetic field, volume fractions of nanoparticles, Brownian motion parameter and decline with increase in Prandtl number. Moreover, concentration of nanoparticles reduces with corresponding growth in Lewis number and thermophoresis, chemical reaction parameters while increases with growth in Brownian motion parameter.
| S-EPMC8049295 | biostudies-literature
Project description:In this work, the thermal analysis for bio-convective hybrid nanofluid flowing upon a thin horizontally moving needle is carried out. The chemical reaction and viscous dissipation has also considered for flow system in the presence of microorganism. The hybrid nanoparticles comprising of Copper [Formula: see text] and Alumina [Formula: see text] are considered for current flow problem. Mathematically the flow problem is formulated by employing the famous Buongiorno's model that will also investigate the consequences of thermophoretic forces and Brownian motion upon flow system. Group of similar variables is used to transform the model equations into dimensionless form and have then solved analytically by homotopy analysis method (HAM). It has established in this work that, flow of fluid declines due to increase in bioconvection Rayleigh number, buoyancy ratio and volume fractions of nanoparticles. Thermal flow grows due to rise in Eckert number, Brownian, thermophoresis parameters and volume fraction of nanoparticles. Concentration profiles increase due to growth in Brownian motion parameter and reduces due to increase in thermophoresis parameter and Lewis number. Motile microorganism profile declines due to augmentation in Peclet and bioconvection Lewis numbers. Moreover, the percentage enhancement in the drag force and rate of heat transfer using conventional nanofluid and hybrid nanofluid are observed and discussed. The hybrid nanofluid increases the skin friction and heat transfer rate more rapidly and efficiently as compared to other traditional fluids. A comparison of the present study with the existing literature is also conducted with a closed agreement between both results for variations in thickness of the needle.
| S-EPMC8044164 | biostudies-literature
Project description:In this research article, we investigated a comprehensive analysis of time-dependent free convection electrically and thermally conducted water-based nanofluid flow containing Copper and Titanium oxide (Cu and TiO 2 ) past a moving porous vertical plate. A uniform transverse magnetic field is imposed perpendicular to the flow direction. Thermal radiation and heat sink terms are included in the energy equation. The governing equations of this flow consist of partial differential equations along with some initial and boundary conditions. The solution method of these flow interpreting equations comprised of two parts. Firstly, principal equations of flow are symmetrically transformed to a set of nonlinear coupled dimensionless partial differential equations using convenient dimensionless parameters. Secondly, the Laplace transformation technique is applied to those non-dimensional equations to get the close form exact solutions. The control of momentum and heat profile with respect to different associated parameters is analyzed thoroughly with the help of graphs. Fluid accelerates with increasing Grashof number (Gr) and porosity parameter (K), while increasing values of heat sink parameter (Q) and Prandtl number (Pr) drop the thermal profile. Moreover, velocity and thermal profile comparison for Cu and TiO 2 -based nanofluids is graphed.
| S-EPMC7070459 | biostudies-literature
Project description:Protein-peptide interactions play essential roles in many cellular processes and their structural characterization is the major focus of current experimental and theoretical research. Two decades ago, it was proposed to employ the steered molecular dynamics (SMD) to assess the strength of protein-peptide interactions. The idea behind using SMD simulations is that the mechanical stability can be used as a promising and an efficient alternative to computationally highly demanding estimation of binding affinity. However, mechanical stability defined as a peak in force-extension profile depends on the choice of the pulling direction. Here we propose an uncommon choice of the pulling direction along resultant dipole moment (RDM) vector, which has not been explored in SMD simulations so far. Using explicit solvent all-atom MD simulations, we apply SMD technique to probe mechanical resistance of ligand-receptor system pulled along two different vectors. A novel pulling direction-when ligand unbinds along the RDM vector-results in stronger forces compared to commonly used ligand unbinding along center of masses vector. Our observation that RDM is one of the factors influencing the mechanical stability of protein-peptide complex can be used to improve the ranking of binding affinities by using mechanical stability as an effective scoring function.
| S-EPMC6222447 | biostudies-literature
Project description:The South Asian Monsoon and mid-latitude Westerlies are two important controls on Tibetan Plateau (TP) fresh water resources. Understanding their interaction requires long-term information on spatial patterns in moisture variability on the TP. Here we develop a network of 23 moisture-sensitive tree-ring chronologies from major juniper forests in a north-south transect on the eastern TP. Over the past five and a half centuries, we find that these chronologies cluster into two groups, North and South, of ∼33° N. Southern and northern regional chronology subsets are positively and significantly correlated with May-June Palmer Drought Severity Indices (PDSI). The meridional moisture stress gradient reconstructed from these data suggests substantial stochastic variation, yet persistent moisture stress differences are observed between 1463-1502 CE and 1693-1734 CE. Identification of these patterns provides clues linking them with forced or intrinsic tropical-extratropical interactions and thus facilitates studies of interannual-decadal dipole variations in hydroclimate over the TP.
| S-EPMC4560780 | biostudies-literature
Project description:The paper deals with a stagnation-point boundary layer flow towards a permeable stretching/shrinking sheet in a nanofluid where the flow and the sheet are not aligned. We used the Buongiorno model that is based on the Brownian diffusion and thermophoresis to describe the nanofluid in this problem. The main purpose of the present paper is to examine whether the non-alignment function has the effect on the problem considered when the fluid suction and injection are imposed. It is interesting to note that the non-alignment function can ruin the symmetry of the flows and prominent in the shrinking sheet. The fluid suction will reduce the impact of the non-alignment function of the stagnation flow and the stretching/shrinking sheet but at the same time increasing the velocity profiles and the shear stress at the surface. Furthermore, the effects of the pertinent parameters such as the Brownian motion, thermophoresis, Lewis number and the suction/injection on the flow and heat transfer characteristics are also taken into consideration. The numerical results are shown in the tables and the figures. It is worth mentioning that dual solutions are found to exist for the shrinking sheet.
| S-EPMC4594122 | biostudies-other
Project description:Dislocation nucleation is essential to our understanding of plastic deformation, ductility, and mechanical strength of crystalline materials. Molecular dynamics simulation has played an important role in uncovering the fundamental mechanisms of dislocation nucleation, but its limited timescale remains a significant challenge for studying nucleation at experimentally relevant conditions. Here we show that dislocation nucleation rates can be accurately predicted over a wide range of conditions by determining the activation free energy from umbrella sampling. Our data reveal very large activation entropies, which contribute a multiplicative factor of many orders of magnitude to the nucleation rate. The activation entropy at constant strain is caused by thermal expansion, with negligible contribution from the vibrational entropy. The activation entropy at constant stress is significantly larger than that at constant strain, as a result of thermal softening. The large activation entropies are caused by anharmonic effects, showing the limitations of the harmonic approximation widely used for rate estimation in solids. Similar behaviors are expected to occur in other nucleation processes in solids.
| S-EPMC3069194 | biostudies-literature
Project description:Polyurethane foam (PUF), a representative insulation material, not only prevents heat conduction but can also support a load. Particular interest in rigid PUF proliferated over the past several years in fields where extreme environments are applied. A closed-cell structure which forms the interior of rigid PUF serves to maximize the utilization of these polymeric foams. Rigid PUF is more sensitive to external conditions such as temperature or restraint than other structural materials such as steel. Depending on the market trends in which utilization of a cryogenic environment is expanding, the tendency of material behavior resulting from the binding effect also needs to be investigated. However, most conventional compression test method standards applicable to rigid PUF do not adequately reflect the restraints. Therefore, this study proposes a method for evaluating the mechanical performance of materials in a more reliable manner than that of conventional tests. Experimental observation and analysis validated this compression evaluation method in which constraints are considered. Consequently, the compressive strength of rigid PUF compared to the results of the conventional test showed a difference of up to 0.47 MPa (approximately 23%) at cryogenic temperatures. This result suggests that there are important factors to consider when assessing performance from a material perspective in an environment where rigid PUF insulation is utilized. It is believed that the test methods newly proposed in this study will provide an experimental framework that can be applied to the evaluation criteria of material properties and reflected in structural design.
| S-EPMC6747564 | biostudies-literature
Project description:While density functional theory (DFT) is often an accurate and efficient methodology for evaluating molecular properties such as energies and multipole moments, this approach often yields larger errors for response properties such as the dipole polarizability (?), which describes the tendency of a molecule to form an induced dipole moment in the presence of an electric field. In this work, we provide static ? tensors (and other molecular properties such as total energy components, dipole and quadrupole moments, etc.) computed using quantum chemical (QC) and DFT methodologies for all 7,211 molecules in the QM7b database. We also provide the same quantities for the 52 molecules in the AlphaML showcase database, which includes the DNA/RNA nucleobases, uncharged amino acids, several open-chain and cyclic carbohydrates, five popular pharmaceutical molecules, and 23 isomers of C8Hn. All QC calculations were performed using linear-response coupled-cluster theory including single and double excitations (LR-CCSD), a sophisticated approach for electron correlation, and the d-aug-cc-pVDZ basis set to mitigate basis set incompleteness error. DFT calculations employed the B3LYP and SCAN0 hybrid functionals, in conjunction with d-aug-cc-pVDZ (B3LYP and SCAN0) and d-aug-cc-pVTZ (B3LYP).
| S-EPMC6700155 | biostudies-literature
Project description:Vertebrate striated muscle thin filaments are thought to be thermodynamically activated in response to an increase in Ca2+ concentration. We tested this hypothesis by measuring time intervals for gliding runs and pauses of individual skeletal muscle thin filaments in cycling myosin motility assays. A classic thermodynamic mechanism predicts that if chemical potential is constant, transitions between runs and pauses of gliding thin filaments will occur at constant rate as given by a Poisson distribution. In this scenario, rate is given by the odds of a pause, and hence, run times between pauses fit an exponential distribution that slopes negatively for all observable run times. However, we determined that relative density of observed run times fits an exponential only at low Ca2+ levels that activate filament gliding. Further titration with Ca2+, or adding excess regulatory proteins tropomyosin and troponin, shifted the relative density of short run times to fit the positive slope of a gamma distribution, which derives from waiting times between Poisson events. Events that arise during a run and prevent the chance of ending a run for a random interval of time account for the observed run time distributions, suggesting that the events originate with cycling myosin. We propose that regulatory proteins of the thin filament require the mechanical force of cycling myosin to achieve the transition state for activation. During activation, combinations of cycling myosin that contribute insufficient activation energy delay deactivation.
| S-EPMC7681033 | biostudies-literature