Calcium phosphate-based materials regulate osteoclast-mediated osseointegration.
Ontology highlight
ABSTRACT:
SUBMITTER: Wang X
PROVIDER: S-EPMC8484898 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:The demand of calcium phosphate bioceramics for biomedical applications is constantly increasing. Efficient and cost-effective production can be achieved using naturally derived materials. In this work, calcium phosphate powders, obtained from dolomitic marble and Mytilus galloprovincialis seashells by a previously reported and improved Rathje method were used to fabricate microporous pellets through cold isostatic pressing followed by sintering at 1200 °C. The interaction of the developed materials with MC3T3-E1 pre-osteoblasts was explored in terms of cell adhesion, morphology, viability, proliferation, and differentiation to evaluate their potential for bone regeneration. Results showed appropriate cell adhesion and high viability without distinguishable differences in the morphological features. Likewise, the pre-osteoblast proliferation overtime on both naturally derived calcium phosphate materials showed a statistically significant increase comparable to that of commercial hydroxyapatite, used as reference material. Furthermore, evaluation of the intracellular alkaline phosphatase activity and collagen synthesis and deposition, used as markers of the osteogenic ability of these bioceramics, revealed that all samples promoted pre-osteoblast differentiation. However, a seashell-derived ceramic demonstrated a higher efficacy in inducing cell differentiation, almost equivalent to that of the commercial hydroxyapatite. Therefore, data obtained demonstrate that this naturally sourced calcium-phosphate material holds promise for applications in bone tissue regeneration.
| S-EPMC6073128 | biostudies-literature
Project description:Osteoclast maturation and function primarily depend on receptor activator of NF-?B ligand (RANKL)-mediated induction of nuclear factor of activated T cells c1 (NFATc1), which is further activated via increased intracellular calcium ([Ca(2+)](i)) oscillation. However, the coordination mechanism that mediates Ca(2+) oscillation during osteoclastogenesis remains ill defined. Here, we identified transmembrane protein 64 (Tmem64) as a regulator of Ca(2+) oscillation during osteoclastogenesis. We found that Tmem64-deficient mice exhibit increased bone mass due in part to impaired osteoclast formation. Using in vitro osteoclast culture systems, we show here that Tmem64 interacts with sarcoplasmic endoplasmic reticulum Ca(2+) ATPase 2 (SERCA2) and modulates its activity. Consequently, Tmem64 deficiency significantly diminishes RANKL-induced [Ca(2+)](i) oscillation, which results in reduced Ca(2+)/calmodulin-dependent protein kinases (CaMK) IV and mitochondrial ROS, both of which contribute to achieving the CREB activity necessary for osteoclast formation. These data demonstrate that Tmem64 is a positive modulator of osteoclast differentiation via SERCA2-dependent Ca(2+) signaling.
| S-EPMC3569742 | biostudies-literature
Project description:Collagen and amelogenin are two major extracellular organic matrix proteins of dentin and enamel, the mineralized tissues comprising a tooth crown. They both are present at the dentin-enamel boundary (DEB), a remarkably robust interface holding dentin and enamel together. It is believed that interactions of dentin and enamel protein assemblies regulate growth and structural organization of mineral crystals at the DEB, leading to a continuum at the molecular level between dentin and enamel organic and mineral phases. To gain insight into the mechanisms of the DEB formation and structural basis of its mechanical resiliency we have studied the interactions between collagen fibrils, amelogenin assemblies, and forming mineral in vitro, using electron microscopy. Our data indicate that collagen fibrils guide assembly of amelogenin into elongated chain or filament-like structures oriented along the long axes of the fibrils. We also show that the interactions between collagen fibrils and amelogenin-calcium phosphate mineral complexes lead to oriented deposition of elongated amorphous mineral particles along the fibril axes, triggering mineralization of the bulk of collagen fibril. The resulting structure was similar to the mineralized collagen fibrils found at the DEB, with arrays of smaller well organized crystals inside the collagen fibrils and bundles of larger crystals on the outside of the fibrils. These data suggest that interactions between collagen and amelogenin might play an important role in the formation of the DEB providing structural continuity between dentin and enamel.
| S-EPMC2885206 | biostudies-literature
Project description:Biomacromolecules control mineral formation during the biomineralization process, but the effects of the organic components' functionality on the type of mineral phase is still unclear. The biomimetic precipitation of calcium phosphates in a physiological medium containing either polycarboxybetaine (PCB) or polysulfobetaine (PSB) was investigated in this study. Amorphous calcium phosphate (ACP) or a mixture of octacalcium phosphate (OCP) and dicalcium phosphate dihydrate (DCPD) in different ratios were identified depending on the sequence of initial solution mixing and on the type of the negative functional group of the polymer used. The more acidic character of the sulfo group in PSB than the carboxy one in PCB determines the dominance of the acidic solid phases, namely, an acidic amorphous phase or DCPD. In the presence of PCB, the formation of ACP with acicular particles arranged in bundles with the same orientation was observed. A preliminary study on the remineralization potential of the hybrid material with the participation of PSB and a mixture of OCP and DCPD did not show an increase in enamel density, contrary to the materials based on PCB and ACP. Moreover, the latter showed the creation of a newly formed crystal layer similar to that of the underlying enamel. This defines PCB/ACP as a promising material for enamel remineralization.
| S-EPMC10608424 | biostudies-literature
Project description:BackgroundCalcium phosphate mediated transfection has been used for delivering DNA into mammalian cells in excess of 30 years due to its most low cost for introducing recombinant DNA into culture cells. However, multiple factors affecting the transfect efficiency are commonly recognized meanwhile for years, the low transfection efficiency of this approach on higher differentiated and non-tumor cells such as CHO and C2C12 limits its application on research.ResultsIn this paper, we systematically evaluated the possible factors affecting the transfection rate of this approach. Two categories, calcium phosphate-DNA co-precipitation and on-cell treatments were set for optimization of plasmid DNA transfection into CHO and C2C12 cell-lines. Throughout experimentation of these categories such as buffer system, transfection media and time, glycerol shocking and so on, we optimized the best procedure to obtain the highest efficiency ultimately. During calcium phosphate DNA-precipitation, the transfection buffer is critical condition optimized with HBS at pH 7.10 (P = 0.013 compared to HEPES in CHO). In the transfection step, FBS is a necessary component in transfection DMEM for high efficiency (P = 0.0005 compared to DMEM alone), and high concentration of co-precipitated particles applied to cultured cells in combination with intermittent vortexing is also crucial to preserve the efficiency. For 6-well culture plates, 800 µl of co-precipitated particles (11.25 µg/mL of cDNA) in 1 well is the optimal (P = 0.007 compared to 200 µl). For the highest transfection efficiency, the most important condition is glycerol in shock treatment (P = 0.002 compared to no shock treatment in CHO, and P = 0.008 compared to no shock treatment in C2C12) after a 6 h incubation (P = 0.004 compared to 16 h in CHO, and P = 0.039 compared to 16 h in C2C12) on cultured cells.ConclusionsCalcium phosphate mediated transfection is the most low-cost approach to introduce recombinant DNA into culture cells. However, the utility of this procedure is limited in highly-differentiated cells. Here we describe the specific HBS-buffered saline, PH, glycerol shock, vortex strength, transfection medium, and particle concentrations conditions necessary to optimize this transfection method in highly differentiated cells.
| S-EPMC5372392 | biostudies-literature
Project description:Tooth decay is prevalent, and secondary caries causes restoration failures, both of which are related to demineralization. There is an urgent need to develop new therapeutic materials with remineralization functions. This article represents the first review on the cutting edge research of poly(amido amine) (PAMAM) in combination with nanoparticles of amorphous calcium phosphate (NACP). PAMAM was excellent nucleation template, and could absorb calcium (Ca) and phosphate (P) ions via its functional groups to activate remineralization. NACP composite and adhesive showed acid-neutralization and Ca and P ion release capabilities. PAMAM+NACP together showed synergistic effects and produced triple benefits: excellent nucleation templates, superior acid-neutralization, and ions release. Therefore, the PAMAM+NACP strategy possessed much greater remineralization capacity than using PAMAM or NACP alone. PAMAM+NACP achieved dentin remineralization even in an acidic solution without any initial Ca and P ions. Besides, the long-term remineralization capability of PAMAM+NACP was established. After prolonged fluid challenge, the immersed PAMAM with the recharged NACP still induced effective dentin mineral regeneration. Furthermore, the hardness of pre-demineralized dentin was increased back to that of healthy dentin, indicating a complete remineralization. Therefore, the novel PAMAM+NACP approach is promising to provide long-term therapeutic effects including tooth remineralization, hardness increase, and caries-inhibition capabilities.
| S-EPMC6506538 | biostudies-literature
Project description:As part of a verification model of antibiotic therapy in cranioplasty, we evaluated the impregnation efficiency of interporous calcium phosphate materials with saline under atmospheric pressure and compared it to the efficiency of using the decompression method established by the Japanese Industrial Standard, under which pressure is reduced by 10 kPa. Five types of material formed in 1 mL cubes were selected as test samples: two consisting of hydroxyapatite (HAp) with 85% and 55% porosity and three of β-tricalcium phosphate (β-TCP) with 75%, 67%, and 57% porosity. All test samples showed an impregnation ratio of more than 70%, except for the HAp sample with 55% porosity, which had a ratio of approximately 50%. These high ratios were achieved at only 15 min. The impregnation effects were likely dependent on porosity and were independent of base material, either HAp or β-TCP. Obtaining sufficient impregnation and antimicrobial efficacy in materials with low porosity, which are commonly used in cranioplasty, would require an increased volume of antibiotics rather than increased duration of impregnation. Our findings will enable the simple preparation of drug-impregnated calcium phosphate materials, even in operating rooms not equipped with a large decompression device.
| S-EPMC7077826 | biostudies-literature
Project description:OBJECTIVE:To investigate the complex structural and dynamical conversion process of the amorphous-calcium-phosphate (ACP)-to-apatite transition in ACP based dental composite materials. METHODS:Composite disks were prepared using zirconia hybridized ACP fillers (0.4 mass fraction) and photo-activated Bis-GMA/TEGDMA resin (0.6 mass fraction). We performed an investigation of the solution-mediated ACP-to-apatite conversion mechanism in controlled acidic aqueous environment with in situ ultra-small angle X-ray scattering based coherent X-ray photon correlation spectroscopy and ex situ X-ray diffraction, as well as other complementary techniques. RESULTS:We established that the ACP-to-apatite conversion in ACP composites is a two-step process, owing to the sensitivity to local structural changes provided by coherent X-rays. Initially, ACP undergoes a local microstructural rearrangement without losing its amorphous character. We established the catalytic role of the acid and found the time scale of this rearrangement strongly depends on the pH of the solution, which agrees with previous findings about ACP without the polymer matrix being present. In the second step, ACP is converted to an apatitic form with the crystallinity of the formed crystallites being poor. Separately, we also confirmed that in the regular Zr-modified ACP the rate of ACP conversion to hydroxyapatite is slowed significantly compared to unmodified ACP, which is beneficial for targeted slow release of functional calcium and phosphate ions from dental composite materials. SIGNIFICANCE:For the first time, we were able to follow the complete solution-mediated transition process from ACP to apatite in this class of dental composites in a controlled aqueous environment. A two-step process, suggested previously, was conclusively identified.
| S-EPMC4167569 | biostudies-literature
Project description:Miniscrew implants (MSIs) have been widely used as temporary anchorage devices in orthodontic clinics. However, one of their major limitations is the relatively high failure rate. We hypothesize that a biomimetic calcium phosphate (BioCaP) coating layer on mini-pin implants might be able to accelerate the osseointegration, and can be a carrier for biological agents. A novel mini-pin implant to mimic the MSIs was used. BioCaP (amorphous or crystalline) coatings with or without the presence of bovine serum albumin (BSA) were applied on such implants and inserted in the metaphyseal tibia in rats. The percentage of bone to implant contact (BIC) in histomorphometric analysis was used to evaluate the osteoconductivity of such implants from six different groups (n=6 rats per group): (1) no coating no BSA group, (2) no coating BSA adsorption group, (3) amorphous BioCaP coating group, (4) amorphous BioCaP coating-incorporated BSA group, (5) crystalline BioCaP coating group, and (6) crystalline BioCaP coating-incorporated BSA group. Samples were retrieved 3 days, 1 week, 2 weeks, and 4 weeks post-surgery. The results showed that the crystalline BioCaP coating served as a drug carrier with a sustained release profile. Furthermore, the significant increase in BIC occurred at week 1 in the crystalline coating group, but at week 2 or week 4 in other groups. These findings indicate that the crystalline BioCaP coating can be a promising surface modification to facilitate early osseointegration and increase the success rate of miniscrew implants in orthodontic clinics.
| S-EPMC9324071 | biostudies-literature
Project description:In cardiomyocytes, calcium is known to control gene expression at the level of transcription, whereas its role in regulating alternative splicing has not been explored. Here we report that, in mouse primary or embryonic stem cell-derived cardiomyocytes, increased calcium levels induce robust and reversible skipping of several alternative exons from endogenously expressed genes. Interestingly, we demonstrate a calcium-mediated splicing regulatory mechanism that depends on changes of histone modifications. Specifically, the regulation occurs through changes in calcium-responsive kinase activities that lead to alterations in histone modifications and subsequent changes in the transcriptional elongation rate and exon skipping. We demonstrate that increased intracellular calcium levels lead to histone hyperacetylation along the body of the genes containing calcium-responsive alternative exons by disrupting the histone deacetylase-to-histone acetyltransferase balance in the nucleus. Consequently, the RNA polymerase II elongation rate increases significantly on those genes, resulting in skipping of the alternative exons. These studies reveal a mechanism by which calcium-level changes in cardiomyocytes impact on the output of gene expression through altering alternative pre-mRNA splicing patterns.
| S-EPMC4246288 | biostudies-literature