Browse
Submit Data
Databases
API
Help

Dataset Information

29 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

The effects of temperature and relative humidity on trichloroethylene sorption capacities of building materials under conditions relevant to vapor intrusion.

ABSTRACT: In this research, the sorption capacities of trichloroethylene (TCE) vapors were investigated at ppbv concentrations on building materials in the temperature range from 283.15 K to 303.15 K and at relative humidity levels of 50% and 85%. These are conditions that are relevant to vapor intrusion investigations. Such interactions of TCE with different materials at different temperatures/ relative humidity have been studied to a very limited extent, and not yet at all at the extremely low concentration ranges in vapor intrusion scenarios. The sorption capacities of the building materials decrease as temperature increases. The isotherms are for the most part linear, indicating that the adsorption process takes place in the Henry's Law regime, except for cinderblock. The isosteric heats of adsorption have been calculated. The sorption capacities of glass wool and nylon carpet increased slightly when the relative humidity increased from 0% to 85% whereas the sorption capacities of printer paper, drywall, and cinderblock decreased significantly at elevated humidity levels. The influence of humidity is complicated since under certain conditions it may enhance sorption or inhibit sorption. The sorption capacities of the studied materials are in a range indicating the possibility of these processes should not be overlooked during vapor intrusion investigations.

SUBMITTER: Xie S

PROVIDER: S-EPMC8493810 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Estimating the oxygenated zone beneath building foundations for petroleum vapor intrusion assessment.

Project description:Previous studies show that aerobic biodegradation can effectively reduce hydrocarbon soil gas concentrations by orders of magnitude. Increasingly, oxygen limited biodegradation is being included in petroleum vapor intrusion (PVI) guidance for risk assessment at leaking underground storage tank sites. The application of PVI risk screening tools is aided by the knowledge of subslab oxygen conditions, which, however, are not commonly measured during site investigations. Here we introduce an algebraically explicit analytical method that can estimate oxygen conditions beneath the building slab, for PVI scenarios with impervious or pervious building foundations. Simulation results by this new model are then used to illustrate the role of site-specific conditions in determining the oxygen replenishment below the building for both scenarios. Furthermore, critical slab-width-to-source-depth ratios and critical source depths for the establishment of a subslab "oxygen shadow" (i.e. anoxic zone below the building) are provided as a function of key parameters such as vapor source concentration, effective diffusion coefficients of concrete and building depth. For impervious slab scenarios the obtained results are shown in good agreement with findings by previous studies and further support the recommendation by U.S. EPA about the inapplicability of vertical exclusion distances for scenarios involving large buildings and high source concentrations. For pervious slabs, results by this new model indicate that even relatively low effective diffusion coefficients of concrete can facilitate the oxygen transport into the subsurface below the building and create oxygenated conditions below the whole slab foundation favorable for petroleum vapor biodegradation.

| S-EPMC5283078 | biostudies-other

Key Design Elements of Building Pressure Cycling for Evaluating Vapor Intrusion-A Literature Review.

Project description:Building pressure cycling (BPC) is becoming an increasingly important tool for studying vapor intrusion. BPC has been used to distinguish subslab and indoor sources of vapor intrusion as well as to define reasonable worst case volatile organic compound mass discharge into a structure. Analyses have been performed both semi-quantitatively with concentration trends and quantitatively with more rigorous flux calculation and source attribution methods. This paper reviews and compares the protocols and outcomes from multiple published applications of this technology to define the key variables that control performance. Common lessons learned are identified, including those that help define the range of building size and type to which BPC is applicable. Differences in test protocols are discussed, recognizing that the complexity of the test protocol required depends on the particular objectives of each project. Research gaps are identified and tabulated for future validation studies and applications.

| S-EPMC7513894 | biostudies-literature

Sorption Study of Water Vapor and a Dye on Chitosan-Based Framework Materials.

Project description:Two types of chitosan framework materials were functionalized with carboxyl groups via a supramolecular cross-linking process by citric acid (CA) and trimesic acid (TMA). The role of surface chemistry (i.e., functional groups) and textural properties (i.e., pore size and surface area) in adsorption properties of these chitosan frameworks toward water vapor and dye was investigated. Extensive characterizations using N2 adsorption-desorption, contact angle measurements, differential scanning calorimetry, atomic force microscopy, and confocal microscopy were carried out to understand structure-property relationships of these framework materials. The dynamic vapor sorption analyzer measured water vapor sorption percentage (R %) values of 46.7, 43.9, and 41.5 for TMA1, CA1 framework materials, and chitosan, respectively. The calculated adsorption percentage values of dyes in aqueous solution were 69.7, 39.2, and 18.8 (R %) for TMA1, CA1, and chitosan, respectively.

| S-EPMC7469416 | biostudies-literature

Microbial and metabolic succession on common building materials under high humidity conditions.

Project description:Despite considerable efforts to characterize the microbial ecology of the built environment, the metabolic mechanisms underpinning microbial colonization and successional dynamics remain unclear, particularly at high moisture conditions. Here, we applied bacterial/viral particle counting, qPCR, amplicon sequencing of the genes encoding 16S and ITS rRNA, and metabolomics to longitudinally characterize the ecological dynamics of four common building materials maintained at high humidity. We varied the natural inoculum provided to each material and wet half of the samples to simulate a potable water leak. Wetted materials had higher growth rates and lower alpha diversity compared to non-wetted materials, and wetting described the majority of the variance in bacterial, fungal, and metabolite structure. Inoculation location was weakly associated with bacterial and fungal beta diversity. Material type influenced bacterial and viral particle abundance and bacterial and metabolic (but not fungal) diversity. Metabolites indicative of microbial activity were identified, and they too differed by material.

| S-EPMC6467912 | biostudies-literature

Data on records of indoor temperature and relative humidity in a University building.

Project description:Good indoor comfort and air quality are essential for correct educational development. Most reports in this field focus on primary and secondary school buildings, with numerous projects conducted in the Mediterranean Zone. However, little has been done in the context of university buildings. Data on indoor temperature and relative humidity data acquired trough field surveys of a seminar room located in the Architecture Faculty in San Sebastian (Spain) is provided in this paper. The seminar room was monitored during a typical spring week. The data presented in the article are related to the research article entitled Retrofit strategies towards Net Zero Energy Educational Buildings: a case study at the University of the Basque Country (Ref. 0378-7788).

| S-EPMC5466555 | biostudies-literature

Field Study of Soil Vapor Extraction for Reducing Off-Site Vapor Intrusion.

Project description:Soil vapor extraction (SVE) is effective for removing volatile organic compound (VOC) mass from the vadose zone and reducing the potential for vapor intrusion (VI) into overlying and surrounding buildings. However, the relationship between residual mass in the subsurface and VI is complex. Through a series of alternating extraction (SVE on) and rebound (SVE off) periods, this field study explored the relationship and aspects of SVE applicable to VI mitigation in a commercial/light-industrial setting. The primary objective was to determine if SVE could provide VI mitigation over a wide area encompassing multiple buildings, city streets, and subsurface utilities and eliminate the need for individual subslab depressurization systems. We determined that SVE effectively mitigates offsite VI by intercepting or diluting contaminant vapors that would otherwise enter buildings through foundation slabs. Data indicate a measurable (5 Pa) influence of SVE on subslab/indoor pressure differential may occur but is not essential for effective VI mitigation. Indoor air quality improvements were evident in buildings 100 to 200 feet away from SVE including those without a measurable reversal of differential pressure across the slab or substantial reductions in subslab VOC concentration. These cases also demonstrated mitigation effects across a four-lane avenue with subsurface utilities. These findings suggest that SVE affects distant VI entry points with little observable impact on differential pressures and without relying on subslab VOC concentration reductions.

| S-EPMC7784703 | biostudies-literature

Comparison of modeled and measured indoor air trichloroethene (TCE) concentrations at a vapor intrusion site: influence of wind, temperature, and building characteristics.

Project description:There is a lack of vapor intrusion (VI) models that reliably account for weather conditions and building characteristics, especially at sites where active alternative pathways, such as sewer connections and other preferential pathways, are present. Here, a method is presented to incorporate freely-available models, CONTAM, and CFD0, to estimate site-specific building air exchange rates (AERs) and indoor air contaminant concentrations by accounting for weather conditions and building characteristics at a well-known VI site with a land drain preferential pathway. To account for uncertainty in model input parameters that influence indoor air chlorinated volatile organic compound (CVOC) concentration variability, this research incorporated Monte Carlo simulations and compared model results with retrospective field data collected over approximately 1.5 years from the study site. The results of this research show that mass entry rates for TCE are likely influenced by indoor air pressures that can be modeled as a function of weather conditions (over seasons) and building characteristics. In addition, the results suggest that temporal variability in indoor air TCE concentrations is greatest (modeled and measured) due to the existence of a land drain, which acts as a preferential pathway, from the subsurface to the granular fill beneath the floor slab. The field data and modeling results are in good agreement and provide a rare comparison of field data and modeling results for a VI site. The modeling approach presented here offers a useful tool for decision makers and VI practitioners as they assess these complex and variable processes that have not been incorporated within other VI models.

| S-EPMC7153494 | biostudies-literature

Data on comparison between FLEC and CLIMPAQ methods used for fast sorption measurements of VOCs on building materials.

Project description:A test emission chamber called CLIMPAQ has been coupled to a chromatography analyzer GC to measure volatile organic compounds (VOC) concentration during a sorption experiments (Fast sorption measurements of VOCs on building materials: Part 2 - Comparison between FLEC and CLIMPAQ methods, (Rizk et al., In press) [1]). The equations used to calculate the mass transfer coefficient and the thickness of the boundary layer developed on the surface of a material are presented. In addition, the experimental profiles obtained using the CLIMPAQ chamber is also presented in the presence and the absence of a building material. Finally, the impact of chamber size on the obtained concentration profile using different chambers is shown using 3 types of chambers having different volumes, 1 m(3), 30 m(3) and a micro chamber of 40 mL.

| S-EPMC4796712 | biostudies-literature

Evidence of a sewer vapor transport pathway at the USEPA vapor intrusion research duplex.

Project description:The role of sewer lines as preferential pathways for vapor intrusion is poorly understood. Although the importance of sewer lines for volatile organic compound (VOC) transport has been documented at a small number of sites with vapor intrusion, sewer lines are not routinely sampled during most vapor intrusion investigations. We have used a tracer study and VOC concentration measurements to evaluate the role of the combined sanitary/storm sewer line in VOC transport at the USEPA vapor intrusion research duplex in Indianapolis, Indiana. The results from the tracer study demonstrated gas migration from the sewer main line into the duplex. The migration pathway appears to be complex and may include leakage from the sewer lateral at a location below the building foundation. Vapor samples collected from the sewer line demonstrated the presence of tetrachloroethene (PCE) and chloroform in the sewer main in front of the duplex and at multiple sample locations within the sewer line upstream of the duplex. These test results combined with results from the prior multi-year study of the duplex indicate that the sewer line plays an important role in transport of VOCs from the subsurface source to the immediate vicinity of the duplex building envelope.

| S-EPMC6084445 | biostudies-other

Mesoporosity of Delignified Wood Investigated by Water Vapor Sorption.

Project description:Wood represents a highly suitable biobased scaffold for the development of mechanically robust and functional materials. Its functionalizability can be enhanced by means of delignification, resulting in an increase in porosity due to partial or complete removal of lignin and hemicellulose constituents. In this work, the impact of partial and complete delignification on the mesoporous structure is investigated via water vapor sorption isotherms and deuterium exchange. Pore size distributions of wood samples with five different delignification levels were compared to native wood. The derived pore size distributions at the water swollen state reveal an increase in porosity with decreasing lignin content. However, after complete lignin removal, drying causes a nonreversible collapse of the cell wall, which results in reduced porosity.

| S-EPMC6682004 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data