Browse
Submit Data
Databases
API
Help

Dataset Information

24 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Bathurst Burr (Xanthium spinosum) Powder-A New Natural Effective Adsorbent for Crystal Violet Dye Removal from Synthetic Wastewaters.

ABSTRACT: A new natural adsorbent material, Bathurst burr powder, was used to remove crystal violet dye from synthetic wastewaters. Particle size distribution and SEM and FTIR analyses were performed to characterize it. The effect of the operational adsorption process parameters (pH, ionic strength, initial dye concentration, adsorbent dose, contact time, temperature) onto the adsorption process was evaluated in a batch system. Equilibrium, kinetic, and thermodynamic studies were performed in order to understand the adsorption process. Taguchi method and ANOVA test were used to optimize the dye adsorption conditions and to establish the percentage contribution of each factor, respectively. The accuracy of the Taguchi prediction method was analyzed by correlating the predicted dye removal efficiency with the experimentally determined one. The particle size distribution analysis showed that 82.15% of the adsorbent particles have an average size below 0.5 mm. The adsorption process followed the Langmuir isotherm and pseudo-second order kinetic model. Maximum adsorption capacity value (164.10 mg·g^-1) was higher compared to many similar adsorbents. The process was endothermic, spontaneous, and favorably involving a physisorption mechanism. The Taguchi method showed that the most influential controllable factor was pH (65% contribution in adsorption efficiency) and the data analysis indicates a very good accuracy of the experimental design (R² = 0.994). The obtained results demonstrated that Bathurst burr powder can be used as a cheap and efficient adsorbent for crystal violet dye removal from aqueous solution.

SUBMITTER: Mosoarca G

PROVIDER: S-EPMC8510156 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Efficient removal of crystal violet dye using EDTA/graphene oxide functionalized corncob: a novel low cost adsorbent.

Project description:In this study, EDTA functionalized corncob (EDTA-corncob) and EDTA/graphene oxide functionalized corncob (EDTA-GO/corncob) were prepared using disodium ethylenediamine tetraacetic acid and the graphene oxide immersion method. EDTA-corncob and EDTA-GO/corncob were characterized by SEM and FTIR spectroscopy. On this basis, the adsorption properties of EDTA-corncob and EDTA-GO/corncob were studied with crystal violet as the adsorbate. The optimum adsorption conditions were determined by the effect of samples on the adsorption properties of crystal violet at different times, temperatures and pH, and the reusability of the samples was studied. The results showed that adsorption capacity of crystal violet on EDTA-GO/corncob was higher compared with natural corncob and EDTA-corncob. The most suitable pH value of the solution is about 6.0, the adsorption equilibrium time is 200 min. EDTA-GO/corncob can be reused eight times. This study indicated that EDTA-GO/corncob is a reusable adsorbent for rapid, low-cost, and efficient removal of dye from waste water.

| S-EPMC9066744 | biostudies-literature

Chemically Modified Polyvinyl Chloride for Removal of Thionine Dye (Lauth's Violet).

Project description:The chemical modification of hydrophobic polymer matrices is an alternative way to elchange their surface properties. The introduction of sulfonic groups in the polymer changes the surface properties such as adhesion, wettability, catalytic ability, and adsorption capacity. This work describes the production and application of chemically modified polyvinyl chloride (PVC) as adsorbent for dyes removal. Chemical modification of PVC was evaluated by infrared spectroscopy and elemental analysis, which indicated the presence of sulfonic groups on PVC. The chemically modified PVC (PVCDS) showed an ion exchange capacity of 1.03 mmol-1, and efficiently removed the thionine dye (Lauth's violet) from aqueous solutions, reaching equilibrium in 30 min. The adsorption kinetics was better adjusted for a pseudo second order model. This result indicates that the adsorption of thionine onto PVCDS occurs by chemisorption. Among the models for the state of equilibrium, SIPS and Langmuir exhibited the best fit to the experimental results and PVCDS showed high adsorption capacities (370 mg-1). Thus, it is assumed that the system presents homogeneous characteristics to the distribution of active sites. The modification promoted the formation of surface characteristics favorable to the dye adsorption by the polymer.

| S-EPMC5706245 | biostudies-other

Cucurbituril-Functionalized Nanocomposite as a Promising Industrial Adsorbent for Rapid Cationic Dye Removal.

Project description:A supramolecular cucurbit[6]uril (CB[6])-enriched magnetic montmorillonite (CBCM) nanocomposite was prepared and characterized. CB[6] played a prominent role as a capping agent, helping in better distribution of the nanoparticles, and as a binder between nanoparticles. Montmorillonite provided structural stability and fortified ultrafast adsorption toward dyes. Its application in the removal of cationic dyes from wastewater was systematically assessed. Process parameters such as pH, initial dye concentration, dosage, temperature, and time were optimized. Kinetics and isotherms of the process were described using pseudo-second-order kinetics and the Langmuir isotherm, respectively. CBCM exhibited rapid dye removal capacity in short reaction times with q max of 199.20, 78.31, and 55.62 mg g-1 and K2 of 0.0281, 0.0.0823, and 0.0953 L mg-1 min-1 for crystal violet, methylene blue, and rhodamine B, respectively. Benefiting from the synergetic effects of montmorillonite surface hydrophobicity, abundant carbonyl groups of CB[6], and magnetic properties of copper ferrite, CBCM demonstrated outstanding dye removal capacity, negligible leaching at saturation, and high tolerance toward harsh conditions. This intrinsic nature is expedient in prolonged industrial operations. To demonstrate industrial viability, syringe filtration and continuous flow fixed-bed column operations were validated. The CBCM fixed-bed column demonstrated stable dye removal efficiency with 10-100 mg mL-1 dye at 10-50 mL min-1 flow rates. Utilizing the magnetic and catalytic activities of the copper ferrite nanoparticles, CBCM was recycled using a magnet, regenerated, and reused for several cycles. CB[6] remarkably improved the performance of the nanocomposite and made it suitable for different effluent treatment techniques. This may pave a sustainable way toward the efficient onsite treatment of effluent at the industrial scale.

| S-EPMC7860087 | biostudies-literature

Phytotoxic Compounds Isolated from Leaves of the Invasive Weed <i>Xanthium spinosum</i>.

Project description:The aim of this study was to identify bioactive compounds from leaves of the invasive plant Xanthium spinosum and assess their phytotoxic activity. Activity-guided fractionation led to the isolation of 6 bioactive compounds: xanthatin (1), 1?,5?-epoxyxanthatin (2), 4-epiisoxanthanol (3), 4-epixanthanol (4), loliolide (5) and dehydrovomifoliol (6). Of them, compounds 2?6 were isolated from the X. spinosum for the first time. The structures of 1?6 were elucidated on the basis of extensive NMR studies and ESI-MS measurements as well as comparison with literature data. All of compounds were evaluated for their phytotoxic activity. Among them, compounds 1?4 exhibited stronger activity on 2 receiver plants compared with the other 2 compounds, with xanthatin (1) being the most potent compound, which suppressed root growth of the dicot plant Amaranthus retroflexus by 32.5%, 39.4%, 84.7% when treated xanthatin (1) at 5, 20, and 100 µg/mL, while for the monocot plant, root growth was inhibited by 14.7%, 28.0%, and 40.0%, respectively. Seedling growth was nearly completely inhibited when the concentration of xanthanolides increased to 500 µg/mL, whereas there was still some seedling growth when loliolide (5) and dehydrovomifoliol (6) were applied at the same concentration. Dehydrovomifoliol (6) did not negatively affect seedling growth of P. annua at all tested concentrations, and root length was still 42.0% of the control when the highest concentration 500 µg/mL was used. This is the first report of the phytotoxicity of 1?,5?-epoxyxanthatin (2), 4-epiisxanthanol (3) and 4-epixanthanol (4). These compounds have the potential to be utilized as natural herbicides, especially 4-epiisoxanthanol (3), which exhibited significant selective activity between the dicot and monocot plants. On the other hand, whether these bioactive substances serve as allelochemicals to facilitate the invasion success of X. spinosum needs to be further studied.

| S-EPMC6278460 | biostudies-literature

Alginate-Based Hydrogel Beads as a Biocompatible and Efficient Adsorbent for Dye Removal from Aqueous Solutions.

Project description:In this study, sodium alginate was employed as a starting material for preparing two kinds of biocompatible adsorbents, including calcium alginate hydrogel beads and magnetic hydrogel beads. Fourier transform infrared spectroscopy, X-ray diffraction pattern, and scanning electron microscopy/energy-dispersive X-ray techniques were used to characterize the prepared adsorbents. The performance of the prepared adsorbents for the removal of methyl violet from aqueous solution was studied in detail. Both kinetics and equilibrium aspects of methyl violet adsorption were investigated, and the obtained equilibrium and kinetics data were described with various adsorption models. The effects of initial dye concentration, adsorbent dosage, and temperature on adsorption performance were investigated. Thermodynamic parameters of adsorption were obtained as well.

| S-EPMC6289535 | biostudies-literature

Optimization of xanthatin extraction from Xanthium spinosum L. and its cytotoxic, anti-angiogenesis and antiviral properties.

Project description:The aqueous extraction of the sesquiterpene lactone xanthatin from Xanthium spinosum L. favours the conversion of xanthinin (1) to xanthatin (2) via the loss of acetic acid. The cytotoxic (Hep-G2 and L1210 human cell lines) and antiviral activities of isolated xanthatin are established. This natural compound shows significant cytotoxicity against the Hep-G2 cell line and our experimental results reveal its strong anti-angiogenesis capacity in vitro. The structure of xanthatin is determined by spectroscopic methods and for the first time confirmed by X-ray diffraction.

| S-EPMC7115430 | biostudies-literature

The efficiency of <i>Raphia hookeri</i> adsorbent in indigo carmine dye removal: Economy depth via chemometrics.

Project description:The remediation of dye pollutants remains a concern in contemporary water management practices. Hence, the need for efficient and cost-effective techniques for dye removal from wastewater. In this study, the epicarp of Raphia hookeri fruits was treated with orthophosphoric acid for enhanced porosity and efficiency in the uptake of Indigo carmine dye (ICD). Treated Raphia hookeri fruit waste (RHPW) presented morphologically distributed pores as well as high porosity with Branneur-Emmet-Teller (BET) surface area of 945.43 m2/g. RHPW displayed functional groups suitable for adsorption. The maximum ICD uptake was observed at pH 5 while the maximum uptake (qmax) was 20.41 mg/g in the concentration range of 2-10 mg/L. Freundlich isotherm and Pseudo-second order kinetics well-described equilibrium and kinetics data respectively. This indicated a multilayered adsorption. The Dubinin-Radushkecich model energy value was 40.82 kJ/mol, indicating chemical adsorption. The ridge regression, the Lasso and the Elastic net statistical models were used to establish a positive relationship between the various adsorption operational parameters studied. Lasso provided the best result based on the estimated mean squared error. The RHPW-ICD adsorption system was more favorable at room temperature, as the removal efficiency decreased with temperature rise. The findings established Raphia hookeri fruit epicarp as an economical and sustainable precursor for the preparation of potent adsorbent for Indigo carmine dye removal. This can find possible application in wastewater treatment.

| S-EPMC11200299 | biostudies-literature

Synthesis, Characterization, and Utilization of a Lignin-Based Adsorbent for Effective Removal of Azo Dye from Aqueous Solution.

Project description:How to effectively remove toxic dyes from the industrial wastewater using a green low-cost lignocellulose-based adsorbent, such as lignin, has become a topic of great interest but remains quite challenging. In this study, cosolvent-enhanced lignocellulosic fractionation (CELF) pretreatment and Mannich reaction were combined to generate an aminated CELF lignin which is subsequently applied for removal of methylene blue and direct blue (DB) 1 dye from aqueous solution. 31P NMR was used to track the degree of amination, and an orthogonal design was applied to determine the relationship between the extent of amination and reaction parameters. The physicochemical, morphological, and thermal properties of the aminated CELF lignin were characterized to confirm the successful grafting of diethylenetriamine onto the lignin. The aminated CELF lignin proved to be an effective azo dye-adsorbent, demonstrating considerably enhanced dye decolorization, especially toward DB 1 dye (>90%). It had a maximum adsorption capacity of DB 1 dye of 502.7 mg/g, and the kinetic study suggested the adsorption process conformed to a pseudo-second-order kinetic model. The isotherm results also showed that the modified lignin-based adsorbent exhibited monolayer adsorption. The adsorbent properties were mainly attributed to the incorporated amine functionalities as well as the increased specific surface area of the aminated CELF lignin.

| S-EPMC7033985 | biostudies-literature

Preparation of new adsorbent-supported Fe/Ni particles for the removal of crystal violet and methylene blue by a heterogeneous Fenton-like reaction.

Project description:Prepared material-supported Fe/Ni particles (PM-Fe/Ni) were produced and applied as an adsorbent, reductant and Fenton-like catalyst for removing methylene blue (MB) and crystal violet (CV) from aqueous solutions. Fe/Ni particles were prepared by reducing ferric chloride with sodium borohydride and supported on the produced porous material. Various techniques including X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET), Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy analysis (SEM) were employed to characterize the crystal phase, surface area, surface morphology and functional groups. Removal experiments were conducted to study the effects of different factors such as PM-Fe/Ni dosage, initial pH, H2O2 concentration, initial concentrations and temperature on MB and CV removal. The removal efficiency of CV and MB by PM-Fe/Ni/H2O2 were 91.86% and 61.41% under the conditions of dye concentration of 1000 mg L-1, H2O2 concentration of 50 mM, PM-Fe/Ni dosage of 0.20 g and temperature of 293 K. The analysis of the degradation kinetics showed that the degradation of MB and CV followed well pseudo-first-order kinetics. A possible mechanism of removal of MB and CV was proposed, including the adsorption, reduction and dominating Fenton oxidation. The regeneration experiments of PM-Fe/Ni demonstrated that PM-Fe/Ni with H2O2 still showed a high removal efficiency after six reaction cycles.

| S-EPMC9066707 | biostudies-literature

Utilizations of electro-coagulated sludge from wastewater treatment plant data as an adsorbent for direct red 28 dye removal.

Project description:This work reported on the adsorptions of direct red 28 dye on to the raw and calcined electro-coagulated, EC, sludge adsorbents collected from the textile wastewater treatment plant. EC sludge adsorbent was prepared with wet treatment by deionized water and calcination at 500 °C. Raw and processed data on main adsorption operation parameters and adsorbent characterization were reported. Also, adsorption isotherm, adsorption kinetics; and thermodynamic models for direct red 28 dye (DR28) removal mechanism on to the raw and calcined EC sludge adsorbents were reported. Instrumental analysis, such as Fourier Transformation infrared spectrometer (FTIR) and Ultraviolet/Visible (UV/Vis) spectroscopy were used for adsorbent characterization and dye absorbance measurement before and after adsorption respectively. UV-Visible spectrometer was used throughout the batch experiment. The effect of adsorption temperature (25 ± 2 °C (ambient), 40 °C, 60 °C and 80 °C), pH (2, 4, 6, 8 and 10), initial dye concentration (20, 40, 60 and 80 mg/L), contact time (10, 20, 40, 60, 80 and 100 min) and adsorbent dosage (0.1, 0.5, 1, 1.5, 2 g/100ml) were examined. For EC sludge adsorbent characteristics, FTIR analysis data is provided as raw and processed data before and after dye adsorption for both raw and calcined EC adsorbent. UV-Vis spectral analysis before and after dye removal with a pH range of 2-10 and batch adsorption experimental data records such as initial dye concentration, solution pH, temperature, adsorbent dosage and mixing time are reported.

| S-EPMC6909148 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data