Browse
Submit Data
Databases
API
Help

Dataset Information

17 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Transition from High-Entropy to Conventional Alloys: Which Are Better?

ABSTRACT: The study of the transition from high-entropy alloys (HEAs) to conventional alloys (CAs) composed of the same alloying components is apparently important, both for understanding the formation of HEAs and for proper evaluation of their potential with respect to that of the corresponding CAs. However, this transition has thus far been studied in only two types of alloy systems: crystalline alloys of iron group metals (such as the Cantor alloy and its derivatives) and both amorphous (a-) and crystalline alloys, TE-TL, of early (TE = Ti, Zr, Nb, Hf) and late (TL = Co, Ni, Cu) transition metals. Here, we briefly overview the main results for the transition from HEAs to CAs in these alloy systems and then present new results for the electronic structure (ES), studied with photoemission spectroscopy and specific heat, atomic structure, thermal, magnetic and mechanical properties of a-TE-TL and Cantor-type alloys. A change in the properties of the alloys studied on crossing from the HEA to the CA concentration range mirrors that in the ES. The compositions of the alloys having the best properties depend on the alloy system and the property selected. This emphasizes the importance of knowing the ES for the design of new compositional complex alloys with the desired properties.

SUBMITTER: Babic E

PROVIDER: S-EPMC8510487 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Fatigue dataset of high-entropy alloys.

Project description:Fatigue failure of metallic structures is of great concern to industrial applications. A material will not be practically useful if it is prone to fatigue failures. To take the advantage of lately emerged high-entropy alloys (HEAs) for designing novel fatigue-resistant alloys, we compiled a fatigue database of HEAs from the literature reported until the beginning of 2022. The database is subdivided into three categories, i.e., low-cycle fatigue (LCF), high-cycle fatigue (HCF), and fatigue crack growth rate (FCGR), which contain 15, 23, and 28 distinct data records, respectively. Each data record in any of three categories is characteristic of a summary, which is comprised of alloy compositions, key fatigue properties, and additional information influential to, or interrelated with, fatigue (e.g., material processing history, phase constitution, grain size, uniaxial tensile properties, and fatigue testing conditions), and an individual dataset, which makes up the original fatigue testing curve. Some representative individual datasets in each category are graphically visualized. The dataset is hosted in an open data repository, Materials Cloud.

| S-EPMC9259632 | biostudies-literature

WEDM Used for Machining High Entropy Alloys.

Project description:Unconventional wire electrical discharge machining technology (WEDM) is a key machining process, especially for machining newly emerging materials, as there are almost no restrictions (only at least minimal electrical conductivity) in terms of demands on the mechanical properties of the workpiece or the need to develop new tool geometry. This study is the first to present an analysis of the machinability of newly developed high entropy alloys (HEAs), namely FeCoCrMnNi and FeCoCrMnNiC0.2, using WEDM. The aim of this study was to find the optimal setting of machine parameters for the efficient production of parts with the required surface quality without defects. For this reason, an extensive design of experiments consisting of 66 rounds was performed, which took into account the influence of five input factors in the form of pulse off time, gap voltage, discharge current, pulse on time, and wire speed on cutting speed and the quality of the machined surface and its subsurface layer. The analysis of topography, morphology, subsurface layers, chemical composition analysis (EDX), and lamella analysis using a transmission electron microscope (TEM) were performed. An optimal setting of the machine parameters was found, which enables machining of FeCoCrMnNi and FeCoCrMnNiC0.2 with the required surface quality without defects.

| S-EPMC7662231 | biostudies-literature

High-temperature martensitic transformation of CuNiHfTiZr high- entropy alloys.

Project description:One of the major challenges of near-equiatomic NiTi shape memory alloys is their limitation for high-temperature applications. To overcome this barrier, researchers have tried to enhance the transformation temperatures by addition of alloying elements or even by introducing the concept of high-entropy alloys (HEAs). In this study, the CuNiHfTiZr HEAs were developed for high-temperature shape memory effect. Based on their solubility and electron configurations, the alloying elements are divided into two groups, (CuNi)50 and (HfTiZr)50. The content of Cu in (CuNi)50 is modulated to investigate the influences of Cu on martensitic transformation of the HEAs by studying structural evolution and transformation behavior. The results of x-ray diffraction and thermal expansion tests revealed that Cu15Ni35Hf16.67Ti16.67Zr16.67 possesses high transformation temperature, narrow hysteresis temperature loops, and good dimensional stability within this HEA system.

| S-EPMC6925220 | biostudies-literature

High-throughput design of high-performance lightweight high-entropy alloys.

Project description:Developing affordable and light high-temperature materials alternative to Ni-base superalloys has significantly increased the efforts in designing advanced ferritic superalloys. However, currently developed ferritic superalloys still exhibit low high-temperature strengths, which limits their usage. Here we use a CALPHAD-based high-throughput computational method to design light, strong, and low-cost high-entropy alloys for elevated-temperature applications. Through the high-throughput screening, precipitation-strengthened lightweight high-entropy alloys are discovered from thousands of initial compositions, which exhibit enhanced strengths compared to other counterparts at room and elevated temperatures. The experimental and theoretical understanding of both successful and failed cases in their strengthening mechanisms and order-disorder transitions further improves the accuracy of the thermodynamic database of the discovered alloy system. This study shows that integrating high-throughput screening, multiscale modeling, and experimental validation proves to be efficient and useful in accelerating the discovery of advanced precipitation-strengthened structural materials tuned by the high-entropy alloy concept.

| S-EPMC8282813 | biostudies-literature

Twinning in metastable high-entropy alloys.

Project description:Twinning is a fundamental mechanism behind the simultaneous increase of strength and ductility in medium- and high-entropy alloys, but its operation is not yet well understood, which limits their exploitation. Since many high-entropy alloys showing outstanding mechanical properties are actually thermodynamically unstable at ambient and cryogenic conditions, the observed twinning challenges the existing phenomenological and theoretical plasticity models. Here, we adopt a transparent approach based on effective energy barriers in combination with first-principle calculations to shed light on the origin of twinning in high-entropy alloys. We demonstrate that twinning can be the primary deformation mode in metastable face-centered cubic alloys with a fraction that surpasses the previously established upper limit. The present advance in plasticity of metals opens opportunities for tailoring the mechanical response in engineering materials by optimizing metastable twinning in high-entropy alloys.

| S-EPMC6006257 | biostudies-other

High Entropy Alloys Mined From Binary Phase Diagrams.

Project description:High entropy alloys (HEA) are a new type of high-performance structural material. Their vast degrees of compositional freedom provide for extensive opportunities to design alloys with tailored properties. However, compositional complexities present challenges for alloy design. Current approaches have shown limited reliability in accounting for the compositional regions of single solid solution and composite phases. For the first time, a phenomenological method analysing binary phase diagrams to predict HEA phases is presented. The hypothesis is that the HEA structural stability is encoded within the phase diagrams. Accordingly, we introduce several phase-diagram inspired parameters and employ machine learning (ML) to classify 600+ reported HEAs based on these parameters. Compared to other large database statistical prediction models, this model gives more detailed and accurate phase predictions. Both the overall HEA prediction and specifically single-phase HEA prediction rate are above 80%. To validate our method, we demonstrated its capability in predicting HEA solid solution phases with or without intermetallics in 42 randomly selected complex compositions, with a success rate of 81%. The presented search approach with high predictive capability can be exploited to interact with and complement other computation-intense methods such as CALPHAD in providing an accelerated and precise HEA design.

| S-EPMC6820750 | biostudies-literature

Unconventional Deformation Behaviours of Nanoscaled High-Entropy Alloys.

Project description:The bulk high-entropy alloys (HEAs) exhibit similar deformation behaviours as traditional metals. These bulk behaviours are likely an averaging of the behaviours exhibited at the nanoscale. Herein, in situ atomic-scale observation of deformation behaviours in nanoscaled CoCrCuFeNi face-centred cubic (FCC) HEA was performed. The deformation behaviours of this nanoscaled FCC HEA (i.e., nanodisturbances and phase transformations) were distinct from those of nanoscaled traditional FCC metals and corresponding bulk HEA. First-principles calculations revealed an obvious fluctuation of the stacking fault energy and stability difference at the atomic scale in the HEA. The stability difference was highlighted only in the nanoscaled HEA and induced unconventional deformation behaviours. Our work suggests that the nanoscaled HEA may provide more chances to discover the long-expected essential distinction between the HEAs and traditional metals.

| S-EPMC7512340 | biostudies-literature

A map of single-phase high-entropy alloys.

Project description:High-entropy alloys have exhibited unusual materials properties. The stability of equimolar single-phase solid solution of five or more elements is supposedly rare and identifying the existence of such alloys has been challenging because of the vast chemical space of possible combinations. Herein, based on high-throughput density-functional theory calculations, we construct a chemical map of single-phase equimolar high-entropy alloys by investigating over 658,000 equimolar quinary alloys through a binary regular solid-solution model. We identify 30,201 potential single-phase equimolar alloys (5% of the possible combinations) forming mainly in body-centered cubic structures. We unveil the chemistries that are likely to form high-entropy alloys, and identify the complex interplay among mixing enthalpy, intermetallics formation, and melting point that drives the formation of these solid solutions. We demonstrate the power of our method by predicting the existence of two new high-entropy alloys, i.e. the body-centered cubic AlCoMnNiV and the face-centered cubic CoFeMnNiZn, which are successfully synthesized.

| S-EPMC10199023 | biostudies-literature

A promising new class of high-temperature alloys: eutectic high-entropy alloys.

Project description:High-entropy alloys (HEAs) can have either high strength or high ductility, and a simultaneous achievement of both still constitutes a tough challenge. The inferior castability and compositional segregation of HEAs are also obstacles for their technological applications. To tackle these problems, here we proposed a novel strategy to design HEAs using the eutectic alloy concept, i.e. to achieve a microstructure composed of alternating soft fcc and hard bcc phases. As a manifestation of this concept, an AlCoCrFeNi2.1 (atomic portion) eutectic high-entropy alloy (EHEA) was designed. The as-cast EHEA possessed a fine lamellar fcc/B2 microstructure, and showed an unprecedented combination of high tensile ductility and high fracture strength at room temperature. The excellent mechanical properties could be kept up to 700°C. This new alloy design strategy can be readily adapted to large-scale industrial production of HEAs with simultaneous high fracture strength and high ductility.

| S-EPMC4145285 | biostudies-other

High-content ductile coherent nanoprecipitates achieve ultrastrong high-entropy alloys.

Project description:Precipitation-hardening high-entropy alloys (PH-HEAs) with good strength-ductility balances are a promising candidate for advanced structural applications. However, current HEAs emphasize near-equiatomic initial compositions, which limit the increase of intermetallic precipitates that are closely related to the alloy strength. Here we present a strategy to design ultrastrong HEAs with high-content nanoprecipitates by phase separation, which can generate a near-equiatomic matrix in situ while forming strengthening phases, producing a PH-HEA regardless of the initial atomic ratio. Accordingly, we develop a non-equiatomic alloy that utilizes spinodal decomposition to create a low-misfit coherent nanostructure combining a near-equiatomic disordered face-centered-cubic (FCC) matrix with high-content ductile Ni3Al-type ordered nanoprecipitates. We find that this spinodal order-disorder nanostructure contributes to a strength increase of ~1.5 GPa (>560%) relative to the HEA without precipitation, achieving one of the highest tensile strength (1.9 GPa) among all bulk HEAs reported previously while retaining good ductility (>9%).

| S-EPMC6170471 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data