Browse
Submit Data
Databases
API
Help

Dataset Information

21 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Effect of Ion Irradiation on Nanoindentation Fracture and Deformation in Silicon Carbide

ABSTRACT: Silicon carbide is desirable for many nuclear applications, making it necessary to understand how it deforms after irradiation. Ion implantation combined with nanoindentation is commonly used to measure radiation-induced changes to mechanical properties; hardness and modulus can be calculated from load–displacement curves, and fracture toughness can be estimated from surface crack lengths. Further insight into indentation deformation and fracture is required to understand the observed changes to mechanical properties caused by irradiation. This paper investigates indentation deformation using high-resolution electron backscatter diffraction (HR-EBSD) and Raman spectroscopy. Significant differences exist after irradiation: fracture is suppressed by swelling-induced compressive residual stresses, and the plastically deformed region extends further from the indentation. During focused ion beam cross-sectioning, indentation cracks grow, and residual stresses are modified. The results clarify the mechanisms responsible for the modification of apparent hardness and apparent indentation toughness values caused by the compressive residual stresses in ion-implanted specimens.

Supplementary Information

The online version contains supplementary material available at 10.1007/s11837-021-04636-8.

SUBMITTER: Leide A

PROVIDER: S-EPMC8549939 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Tuning the deformation mechanisms of boron carbide via silicon doping.

Project description:Boron carbide suffers from a loss of strength and toughness when subjected to high shear stresses due to amorphization. Here, we report that a small amount of Si doping (~1 atomic %) leads to a substantial decrease in stress-induced amorphization due to a noticeable change of the deformation mechanisms in boron carbide. In the undoped boron carbide, the Berkovich indentation-induced quasi-plasticity is dominated by amorphization and microcracking along the amorphous shear bands. This mechanism resulted in long, distinct, and single-variant shear faults. In contrast, substantial fragmentation with limited amorphization was activated in the Si-doped boron carbide, manifested by the short, diffuse, and multivariant shear faults. Microcracking via fragmentation competed with and subsequently mitigated amorphization. This work highlights the important roles that solute atoms play on the structural stability of boron carbide and opens up new avenues to tune deformation mechanisms of ceramics via doping.

| S-EPMC6814370 | biostudies-literature

Enhanced cavity coupling to silicon vacancies in 4H silicon carbide using laser irradiation and thermal annealing.

Project description:The negatively charged silicon monovacancy [Formula: see text] in 4H silicon carbide (SiC) is a spin-active point defect that has the potential to act as a qubit in solid-state quantum information applications. Photonic crystal cavities (PCCs) can augment the optical emission of the [Formula: see text], yet fine-tuning the defect-cavity interaction remains challenging. We report on two postfabrication processes that result in enhancement of the [Formula: see text] optical emission from our PCCs, an indication of improved coupling between the cavity and ensemble of silicon vacancies. Below-bandgap irradiation at 785-nm and 532-nm wavelengths carried out at times ranging from a few minutes to several hours results in stable enhancement of emission, believed to result from changing the relative ratio of [Formula: see text] ("dark state") to [Formula: see text] ("bright state"). The much faster change effected by 532-nm irradiation may result from cooperative charge-state conversion due to proximal defects. Thermal annealing at 100 °C, carried out over 20 min, also results in emission enhancements and may be explained by the relatively low-activation energy diffusion of carbon interstitials [Formula: see text], subsequently recombining with other defects to create additional [Formula: see text]s. These PCC-enabled experiments reveal insights into defect modifications and interactions within a controlled, designated volume and indicate pathways to improved defect-cavity interactions.

| S-EPMC8000350 | biostudies-literature

Nanoindentation Induced Deformation and Pop-in Events in a Silicon Crystal: Molecular Dynamics Simulation and Experiment.

Project description:Silicon has such versatile characteristics that the mechanical behavior and deformation mechanism under contact load are still unclear and hence are interesting and challenging issues. Based on combined study using molecular dynamics simulations and experiments of nanoindentation on Si(100), the versatile deformation modes, including high pressure phase transformation (HPPT), dislocation, median crack and surface crack, were found, and occurrence of multiple pop-in events in the load-indentation strain curves was reported. HPPTs are regard as the dominant deformation mode and even becomes the single deformation mode at a small indentation strain (0.107 in simulations), suggesting the presence of a defect-free region. Moreover, the one-to-one relationship between the pop-in events and the deformation modes is established. Three distinct mechanisms are identified to be responsible for the occurrence of multiple pop-in events in sequence. In the first mechanism, HPPTs from Si-I to Si-II and Si-I to bct5 induce the first pop-in event. The formation and extrusion of α-Si outside the indentation cavity are responsible for the subsequent pop-in event. And the major cracks on the surface induces the pop-in event at extreme high load. The observed dislocation burst and median crack beneath the transformation region produce no detectable pop-in events.

| S-EPMC5578969 | biostudies-literature

Atomic Configuration of Point Defect Clusters in Ion-Irradiated Silicon Carbide.

Project description:Silicon Carbide (SiC) is a promising cladding material for accident-tolerant fuel in light water reactors due to its excellent resistance to chemical attacks at high temperatures, which can prevent severe accident-induced environmental disasters. Although it has been known for decades that radiation-induced swelling at low temperatures is driven by the formation of black spot defects with sizes smaller than 2 nm in irradiated SiC, the structure of these defect clusters and the mechanism of lattice expansion have not been clarified and remain as one of the most important scientific issues in nuclear materials research. Here we report the atomic configuration of defect clusters using Cs-corrected transmission electron microscopy and molecular dynamics to determine the mechanism of these defects to radiation swelling. This study also provides compelling evidence that irradiation-induced point defect clusters are vacancy-rich clusters and lattice expansion results from the homogenous distribution of unrecovered interstitials in the material.

| S-EPMC5676775 | biostudies-literature

Silicon carbide-free graphene growth on silicon for lithium-ion battery with high volumetric energy density.

Project description:Silicon is receiving discernable attention as an active material for next generation lithium-ion battery anodes because of its unparalleled gravimetric capacity. However, the large volume change of silicon over charge-discharge cycles weakens its competitiveness in the volumetric energy density and cycle life. Here we report direct graphene growth over silicon nanoparticles without silicon carbide formation. The graphene layers anchored onto the silicon surface accommodate the volume expansion of silicon via a sliding process between adjacent graphene layers. When paired with a commercial lithium cobalt oxide cathode, the silicon carbide-free graphene coating allows the full cell to reach volumetric energy densities of 972 and 700 Wh l(-1) at first and 200th cycle, respectively, 1.8 and 1.5 times higher than those of current commercial lithium-ion batteries. This observation suggests that two-dimensional layered structure of graphene and its silicon carbide-free integration with silicon can serve as a prototype in advancing silicon anodes to commercially viable technology.

| S-EPMC4491181 | biostudies-literature

Anomalous Plastic Deformation and Sputtering of Ion Irradiated Silicon Nanowires.

Project description:Silicon nanowires of various diameters were irradiated with 100 keV and 300 keV Ar(+) ions on a rotatable and heatable stage. Irradiation at elevated temperatures above 300 °C retains the geometry of the nanostructure and sputtering can be gauged accurately. The diameter dependence of the sputtering shows a maximum if the ion range matches the nanowire diameter, which is in good agreement with Monte Carlo simulations based on binary collisions. Nanowires irradiated at room temperature, however, amorphize and deform plastically. So far, plastic deformation has not been observed in bulk silicon at such low ion energies. The magnitude and direction of the deformation is independent of the ion-beam direction and cannot be explained with mass-transport in a binary collision cascade but only by collective movement of atoms in the collision cascade with the given boundary conditions of a high surface to volume ratio.

| S-EPMC4463547 | biostudies-literature

Silicon carbide formation from methane and silicon monoxide.

Project description:Silicon carbide (SiC) formation plays an important role during the production of elemental silicon. SiC forms through a high temperature reaction between silicon monoxide gas (SiO) and carbon. Currently, the carbon sources are solids, however finding a way of substituting the solid carbon with methane could have several advantages. SiC formation was studied in argon, hydrogen and methane containing atmospheres at 1650 °C and 1750 °C. SiO gas was generated from pellets of a 1:2 molar ratio of SiC and silica (SiO2). The reactions were investigated through CO off-gas analysis in conjunction with measuring the weight change. After each experiment, the reaction products were examined in a scanning electron microscope with secondary electrons and through energy-dispersive X-ray spectroscopy. It was confirmed that SiC may form from SiO and methane. Increasing the methane content to 5% caused a significant increase in SiC formation. Furthermore, the SiC structure was also highly sensitive to the methane content that was used. In addition, the SiO producing reaction was affected by hydrogen. The hydrogen lead to an increased rate of SiO formation relative to what was seen in argon. The effect of hydrogen was most pronounced at 1750 °C which is right after the melting of silica.

| S-EPMC7733506 | biostudies-literature

Effect of Piezoresistive Behavior on Electron Emission from Individual Silicon Carbide Nanowire.

Project description:The excellent properties of silicon carbide (SiC) make it widely applied in high-voltage, high-power, and high-temperature electronic devices. SiC nanowires combine the excellent physical properties of SiC material and the advantages of nanoscale structures, thus attracting significant attention from researchers. Herein, the electron vacuum tunneling emission characteristics of an individual SiC nanowire affected by the piezoresistive effect are investigated using in situ electric measurement in a scanning electron microscope (SEM) chamber. The results demonstrate that the piezoresistive effect caused by the electrostatic force has a significant impact on the electronic transport properties of the nanowire, and the excellent electron emission characteristics can be achieved in the pulse voltage driving mode, including lower turn-on voltage and higher maximum current. Furthermore, a physical model about the piezoresistive effect of SiC nanowire is proposed to explain the transformation of electronic transport under the action of electrostatic force in DC voltage and pulsed voltage driving modes. The findings can provide a way to obtain excellent electron emission characteristics from SiC nanowires.

| S-EPMC6669601 | biostudies-literature

Integrated silicon carbide electro-optic modulator.

Project description:Owing to its attractive optical and electronic properties, silicon carbide is an emerging platform for integrated photonics. However an integral component of the platform is missing-an electro-optic modulator, a device which encodes electrical signals onto light. As a non-centrosymmetric crystal, silicon carbide exhibits the Pockels effect, yet a modulator has not been realized since the discovery of this effect more than three decades ago. Here we design, fabricate, and demonstrate a Pockels modulator in silicon carbide. Specifically, we realize a waveguide-integrated, small form-factor, gigahertz-bandwidth modulator that operates using complementary metal-oxide-semiconductor (CMOS)-level voltages on a thin film of silicon carbide on insulator. Our device is fabricated using a CMOS foundry compatible fabrication process and features no signal degradation, no presence of photorefractive effects, and stable operation at high optical intensities (913 kW/mm2), allowing for high optical signal-to-noise ratios for modern communications. Our work unites Pockels electro-optics with a CMOS foundry compatible platform in silicon carbide.

| S-EPMC8983721 | biostudies-literature

Nanoindentation dataset of silicon and hafnia doped silicon coatings produced by magnetron sputtering.

Project description:Mechanical properties of three different coatings comprising of pure silicon, 36 mol% HfO2-doped silicon and 60 mol% HfO2-doped silicon on SiC substrate material were obtained by nanoindentation. The coatings aim at oxidation protective layers in environmental barrier coating systems for SiC/SiC ceramic matrix composites (CMC). The examined coatings were produced by physical vapour deposition (magnetron sputtering) and have been tested under cycling conditions between room temperature and 1523?K until 100?h accumulated hot time. In order to measure the hardness and the reduced Young's modulus, a Berkovich tip has been used with a constant depth modulus of 100?nm and 160?nm. Two depth moduli have been chosen to investigate a possible volume impact on the mechanical properties. Six successfully produced indents have been averaged to examine the hardness and reduced Young's modulus. The testing has been done on polished cross sections thereby minimising the impact of the substrate material on the measured values. This article provides data related to "Hafnia-doped Silicon Bond Coats manufactured by PVD for SiC/SiC CMCs".

| S-EPMC7306585 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data