Browse
Submit Data
Databases
API
Help

Dataset Information

31 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Physical aspects of orange essential oil-contaning particles after vacuum spray drying processing

ABSTRACT: Highlights • VSD: a new strategy for improvement of food and flavor quality.• Higher limonene content was attributed to low temperature of the system.• Protection of thermosensitive can be improved by the use of vacuum in SD. Vaccum spray drying has been shown as an alternative for drying sensitive compounds at lower temperatures than the conventional spray drying. Here, powders produced by both processes are compared considering their physical aspects and storage conditions. Orange essential oil-containing particles were produced by spray drying (190 °C/90 °C) and by vacuum spray drying (30 °C). The particles produced by vacuum spray dryer presented lower porosity and lower water adsorption than spray dried particles. Particles produced by both processes presented amorphous characteristics and no interaction between the wall material and encapsulated oil was observed. However, a lower oxidative stability during accelerated shelf life tests, in a period of 48 h, which can be related to the enhancement of oil retention. This study has significance for understanding the effect of the pressure and temperature over sensitive compounds and structural changes in the particles.

SUBMITTER: Ramos F

PROVIDER: S-EPMC8550986 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Evaluation of the microencapsulation of orange essential oil in biopolymers by using a spray-drying process.

Project description:Essential oils are volatile compounds commonly used by several industries, easily degradable, which restrains their applications. Therefore, we developed and validated a methodology for producing microcapsules loaded with orange essential oil, using a spray-drying process. The experimental design results showed that the combination between a low flow transfer rate (0.15 L h-1) of the colloidal suspension, a higher drying air flow rate (536 L h-1), and an inlet air temperature of 150 °C to the spray-dryer were the most important parameters for the atomization efficiency. The method optimization resulted in microcapsules with powder recovery between 7.6 and 79.9% (w w-1), oil content ranging from 8.9 to 90.4% (w w-1), encapsulation efficiency between 5.7 and 97.0% (w w-1), and particle sizes with a high frequency of distribution less than 4 μm. In these experiments, gelatin and lignin were evaluated as biopolymers of encapsulation. We also developed an analytical method using headspace gas chromatography. The matrix effects could be addressed by using matrix-matched calibration curves. The chromatographic analysis was linear and selective for D-limonene between 0.025 and 3.00 µg mL-1, with correlation coefficients higher than 0.99. The analytical method had limits of detection and quantitation of 0.024 and 0.073 mg g-1 for gelatin and 0.039 and 0.119 mg g-1 for lignin, respectively.

| S-EPMC7367259 | biostudies-literature

Characterization of Oregano Essential Oil (Origanum vulgare L. subsp. hirtum) Particles Produced by the Novel Nano Spray Drying Technique.

Project description:Oregano essential oil (OEO), due to its wide variety of biological activities, could be a "green" alternative to chemical preservatives. On the other hand, the difficulties in its use or storage have turned researchers' interest in encapsulation strategies as a way to face stability and handling issues. Fabrication of OEO-loaded particles, using nano spray drying technique (NSD) and whey protein isolate-maltodextrin mixtures (1:1, 1:3) as wall materials appears to be a novel and promising strategy. The obtained particles were characterized in terms of volatile composition, encapsulation efficiency, and physicochemical, molecular, morphological, and antibacterial properties. The results confirmed that encapsulation of OEO using NSD achieved high levels of powder recovery (>77%) and encapsulation efficiency (>98%) while assisting in the retention of the main bioactive compounds. The partial replacement of WPI by MD significantly affected particles' physical properties. FTIR analyses revealed the possible structural stabilization of core and wall materials, while SEM verified the very fine size and spherical shape. Finally, antibacterial studies demonstrated their activity against Escherichia coli and Staphylococcus aureus, which is much stronger in comparison with that of pure OEO, proving the positive effect of NSD and particles' potential in future food applications.

| S-EPMC8700915 | biostudies-literature

Dataset of <i>Schinus terebinthifolius</i> essential oil microencapsulated by spray-drying.

Project description:Schinus terebinthifolius Raddi has been extensively studied due to its antioxidant, anti-inflammatory and antibiotic properties. Recently, its seeds have been tested against some insect pests as an insecticide, repellent and antifungal agent. Microencapsulation by spray-drying is widely used in the food and drug industries, as well as in the microencapsulation of essential oils, since it protects the oils against several effects, such as oxidation and thermal degradation, thus optimising its use. The aim was to microencapsulate S. terebinthifolius essential oil by spray-drying maltodextrin and arabic gum as encapsulating agents and SiO2 as a colloidal adjuvant. The morphology of the microcapsules was analysed by scanning electron microscopy (SEM), which evidenced mainly regular spherical-shaped particles with sizes between 5 and 10 µm. The thermal stability was studied by thermogravimetric analysis-differential scanning calorimetry (TGA-DSC), and the microcapsules were stable at temperatures up to 200°C. The microencapsulating agents and the spray-drying technique produced microcapsules capable of protecting the essential oil against external effects, such as thermal degradation.

| S-EPMC9931886 | biostudies-literature

Compression of amorphous solid dispersions prepared by hot-melt extrusion, spray drying and vacuum drum drying.

Project description:The present study explored vacuum drum drying (VDD) as an alternative technology for amorphous solid dispersions (ASDs) manufacture compared to hot-melt extrusion (HME) and spray drying (SD) focusing on downstream processability (powder properties, compression behavior and tablet performance). Ritonavir (15% w/w) in a copovidone/sorbitan monolaurate matrix was used as ASD model system. The pure ASDs and respective tablet blends (TB) (addition of filler, glidant, lubricant) were investigated. Milled extrudate showed superior powder properties (e.g., flowability, bulk density) compared to VDD and SD, which could be compensated by the addition of 12.9% outer phase. Advantageously, the VDD intermediate was directly compressible, whereas the SD material was not, resulting in tablets with defects based on a high degree of elastic recovery. Compared to HME, the VDD material showed superior tabletability when formulated as TB, resulting in stronger compacts at even lower solid fraction values. Despite the differences in tablet processing, tablets showed similar tablet performance in terms of disintegration and dissolution independent of the ASD origin. In conclusion, VDD is a valid alternative to manufacture ASDs. VDD offered advantageous downstream processability compared to SD: less solvents and process steps required (no second drying), improved powder properties and suitable for direct compression.

| S-EPMC8632852 | biostudies-literature

Microencapsulation of Curcumin in Crosslinked Jelly Fig Pectin Using Vacuum Spray Drying Technique for Effective Drug Delivery.

Project description:Microencapsulation of curcumin in jelly fig pectin was performed by the vacuum spray drying (VSD) technique. The VSD was advanced with a low inlet temperature of 80-90 °C and low pressure of 0.01 mPa. By the in situ cross-linking with multivalent calcium ions, jelly fig pectin produced stable curcumin encapsulated microparticles. The physiochemical characteristics of microparticles were thoroughly investigated. The results revealed that 0.75 w/w% of jelly fig pectin and inlet temperature of 90 °C could be feasible for obtaining curcumin microparticles. The VSD technique showed the best encapsulation efficiency and yield and loading efficiency was up to 91.56 ± 0.80%, 70.02 ± 1.96%, and 5.45 ± 0.14%, respectively. The curcumin was readily released into simulated gastrointestinal fluid with 95.34 ± 0.78% cumulative release in 24 h. The antioxidant activity was stable after being stored for six months and stored as a solution for seven days at room temperature before analysis. Hence, the VSD technique could be applicable for the microencapsulation of bioactive compounds such as curcumin to protect and use in the food/pharmaceutical industry.

| S-EPMC8398278 | biostudies-literature

Effects of drying method and excipient on the structure and physical stability of protein solids: Freeze drying vs. spray freeze drying.

Project description:This study aims to determine the impacts of drying method and excipient on changes in protein structure and physical stability of model protein solids. Protein solids containing one of two model proteins (lysozyme or myoglobin) were produced with or without excipients (sucrose or mannitol) using freeze drying or spray freeze drying (SFD). The protein powders were then characterized using solid-state Fourier transform infrared spectroscopy (ssFTIR), differential scanning calorimetry (DSC), circular dichroism spectrometry (CD), size exclusion chromatography (SEC), BET surface area measurements and solid-state hydrogen deuterium exchange with mass spectrometry (ssHDX-MS). ssFTIR and CD could identify little to no difference in structure of the proteins in the formulation. ssHDX-MS was able to identify the population heterogeneity, which was undetectable by conventional characterization techniques of ssFTIR and CD. ssHDX-MS metrics such as Dmax and peak area showed a good correlation with the protein physical instability (loss of the monomeric peak area by size exclusion chromatography) in 90-day stability studies conducted at 40 °C for lysozyme. Higher specific surface area was associated with greater loss in monomer content for myoglobin-mannitol formulations as compared to myoglobin-only formulations. Spray freeze drying seems a viable manufacturing technique for protein solids with appropriate optimization of formulations. The differences observed within the formulations and between the processes using ssHDX-MS, BET surface area measurements and SEC in this study provide an insight into the influence of drying methods and excipients on protein physical stability.

| S-EPMC7856218 | biostudies-literature

Pharmaceutical particle engineering via spray drying.

Project description:This review covers recent developments in the area of particle engineering via spray drying. The last decade has seen a shift from empirical formulation efforts to an engineering approach based on a better understanding of particle formation in the spray drying process. Microparticles with nanoscale substructures can now be designed and their functionality has contributed significantly to stability and efficacy of the particulate dosage form. The review provides concepts and a theoretical framework for particle design calculations. It reviews experimental research into parameters that influence particle formation. A classification based on dimensionless numbers is presented that can be used to estimate how excipient properties in combination with process parameters influence the morphology of the engineered particles. A wide range of pharmaceutical application examples -- low density particles, composite particles, microencapsulation, and glass stabilization -- is discussed, with specific emphasis on the underlying particle formation mechanisms and design concepts.

| S-EPMC2292490 | biostudies-other

Encapsulation of Functional Plant Oil by Spray Drying: Physicochemical Characterization and Enhanced Anti-Colitis Activity.

Project description:In this study, an encapsulation system was developed for functional plant oil delivery. Through a series of orthogonal experiments and single factor experiments, the raw material compositions, emulsification conditions, and spray drying conditions for the preparation of flaxseed oil and safflower seed oil powders were optimized, and the final encapsulation efficiency was as high as 99% with approximately 50% oil loading. The storage stability experiments showed that oil powder's stability could maintain its physicochemical properties over six months. Oral supplementation of the spray-dried flaxseed oil powder exhibited a significant and better effect than flaxseed oil on alleviating colitis in C57BL/6J mice. It suppressed the pro-inflammatory cell factors, including IL-6 and TNF-α, and repaired gut microbial dysbiosis by increasing the microbial diversity and promoting the proliferation of probiotic taxa such as Allobaculum. This work suggests that spray-dried flaxseed oil powder has great potential as a nutraceutical food, with spray drying being a good alternative technique to improve its bioactivity.

| S-EPMC9562653 | biostudies-literature

Aqueous-System-Enabled Spray-Drying Technique for the Synthesis of Hollow Polycrystalline ZIF-8 MOF Particles.

Project description:Zeolitic imidazolate framework-8 shares the same topology with sodalite zeolite but consists of Zn nodes bridged by imidazolate linkers to form a neutral open-framework structure. ZIF-8 has been recognized as a unique molecular sieving material with a flexible framework enabling interesting "gate-opening" functionality. Controlling the crystal size and shape is crucial for regulating the structural flexibilities and mass transport properties. The present study demonstrates that an aqueous-system-enabled spray-drying process enables the shape engineering of ZIF-8 with a hollow polycrystalline structure. It is notable that our synthesis route produces an amorphous zinc complex compound, which possesses a continuous random network partially with crystalline fillers, after spray drying followed by an amorphous-to-crystal transition via activation treatment using polar organic solvents. The size of primary ZIF-8 crystals consisting of secondary polycrystals depends on the kind of the organic solvent. The macro-/microscopic structures of hollow polycrystalline ZIF-8 significantly structurally enhanced the adsorption capacity and uptake rate. The large-scale, rapid production and enhanced adsorption performances make this continuous method a very promising candidate for industrial applications and shaping of MOF.

| S-EPMC6644740 | biostudies-literature

Spray-Drying to Get Spin-Crossover Materials.

Project description:Spin-crossover (SCO) triazole-based coordination polymers can be synthesized by micelle techniques, which almost always lead to rod-shaped nanoparticles. In order to notably reach new morphologies, we explore here the potentiality of the spray-drying (SD) method to get SCO materials. Three SCO coordination polymers and a mononuclear complex are investigated. In all cases, the SD method obtains particles definitely showing SCO. The features of the latter are yet always different from those of the referenced materials, in the sense that SCO is more gradual and incomplete, in adequacy with the poor crystallinity of the powders obtained by SD. In the case of coordination polymers, the particles are preferentially spherical. Indications of possible polymorphism and/or new materials induced by the use of the SD method are evidenced. In the case of the mononuclear complex, the SD method has allowed reproducing, in a quick and easy way, the well-known bulk compound. This exploratory work demonstrates the relevance of the concept and opens the way to a systematic scrutiny of all the experimental parameters to tune the size, morphology, and properties of the SD-synthesized SCO particles.

| S-EPMC5344545 | biostudies-other

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data