Preparation of Graphene Oxide/La2Ti2O7 Composites with Enhanced Electrochemical Performances for Supercapacitors
Ontology highlight
ABSTRACT:
SUBMITTER: Lu M
PROVIDER: S-EPMC8552325 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Vanadium oxide has attracted extensive attention for electrochemical capacitors due to its wide range of versatility. However, due to the relative poor conductivity and chemical stability of vanadium oxide, severe losses of capacitance often occur during charge and discharge processes. Herein, a free-standing vanadium dioxide (VO2(B)) nanobelts/reduced graphene oxide (VO2/rGO) composite film was fabricated by assembly of VO2(B) nanobelts and rGO for supercapacitors. The flexible rGO sheets and VO2(B) nanobelts intertwined together to form a porous framework, which delivered a 353 F g-1 specific capacitance at 1 A g-1, and after 500 cycles, the specific capacitance retention rate was 80% due to the enhanced conductivity of the VO2(B) nanobelts by rGO and increased transport of ions and electrons by the porous structures. An all-solid-state symmetrical supercapacitor was assembled from the VO2/rGO composites, which exhibited good energy storage performance with a maximum voltage of 1.6 V. The maximum power density is 7152 W kg-1 at the energy density of 3.13 W h kg-1, ranking as one of the highest power densities for reported materials. In addition, after 10000 cycles, it still has a specific capacitance retention rate of 78% at 10 A g-1.
| S-EPMC6658522 | biostudies-literature
Project description:Here we reported a coordinating etching and precipitating method to synthesize a complex binary metal oxides hollow cubic structure. A novel NiCoO2/rGO composite with a structure of NiCoO2 nanocages anchored on layers of reduced graphene oxide (rGO) were synthesized via a simple template-assisted method and the electrochemical performance was investigated by cyclic voltammetry, galvanostatic charge-discharge and electrochemical impedance spectroscopy tests as a faradaic electrode for supercapacitors at a graphene weight ratio of 1 wt% (1%). When used as electrode materials for electrochemical capacitors, the NiCoO2/rGO composites achieved a specific capacity of 1375 F g-1 at the current density of 1 A g-1 and maintained 742 F g-1 at 10 A g-1. After 3000 cycles, the supercapacitor based on these nanocage structures shows long-term cycling performance with a high capacity of 778 F g-1 at a current density of 1 A g-1. These outstanding electrochemical performances are primarily attributed to the special morphological structure and the combination of mixed transition metal oxides and rGO, which not only maintains a high electrical conductivity for the overall electrode but also prevents the aggregation and volume expansion of electrochemical materials during the cycling processes.
| S-EPMC9080341 | biostudies-literature
Project description:In this paper, δ-MnO2 with layered structure was prepared by a facile liquid phase method, and exfoliated MnO2 nanosheet (e-MnO2) was obtained by ultrasonic exfoliation, whose surface was negatively charged. Then, positive charges were grafted on the surface of MnO2 nanosheets with a polycation electrolyte of polydiallyl dimethylammonium chloride (PDDA) in different concentrations. A series of e-MnO2@reduced graphene oxide (rGO) composites were obtained by electrostatic self-assembly combined with hydrothermal chemical reduction. When PDDA was adjusted to 0.75 g/L, the thickness of e-MnO2 was ~1.2 nm, and the nanosheets were uniformly adsorbed on the surface of graphene, which shows layer-by-layer morphology with a specific surface area of ~154 m2/g. On account of the unique heterostructure, the composite exhibits good electrochemical performance as supercapacitor electrodes. The specific capacitance of e-MnO2-0.75@rGO can reach 456 F/g at a current density of 1 A/g in KOH electrolyte, which still remains 201 F/g at 10 A/g. In addition, the capacitance retention is 98.7% after 10000 charge-discharge cycles at 20 A/g. Furthermore, an asymmetric supercapacitor (ASC) device of e-MnO2-0.75@rGO//graphene hydrogel (GH) was assembled, of which the specific capacitance achieves 94 F/g (1 A/g) and the cycle stability is excellent, with a retention rate of 99.3% over 10000 cycles (20 A/g).
| S-EPMC9697611 | biostudies-literature
Project description:There is much recent interest in graphene-based composite electrode materials because of their excellent mechanical strengths, high electron mobilities, and large specific surface areas. These materials are good candidates for applications in supercapacitors. In this work, a new graphene-based electrode material for supercapacitors was fabricated by anchoring carbon dots (CDs) on reduced graphene oxide (rGO). The capacitive properties of electrodes in aqueous electrolytes were systematically studied by galvanostatic charge-discharge measurements, cyclic voltammetry, and electrochemical impedance spectroscopy. The capacitance of rGO was improved when an appropriate amount of CDs were added to the material. The CD/rGO electrode exhibited a good reversibility, excellent rate capability, fast charge transfer, and high specific capacitance in 1 M H₂SO₄. Its capacitance was as high as 211.9 F/g at a current density of 0.5 A/g. This capacitance was 74.3% higher than that of a pristine rGO electrode (121.6 F/g), and the capacitance of the CD/rGO electrode retained 92.8% of its original value after 1000 cycles at a CDs-to-rGO ratio of 5:1.
| S-EPMC5245759 | biostudies-literature
Project description:This work describes solid-state asymmetric supercapacitors (ASCs), composed of aniline oligomers as a cathode, nonoxidative graphene sheet as an anode, and polyvinyl alcohol-potassium hydroxide gel as an electrolyte. The synergistic effects resulting from the combination of aniline oligomer and graphene sheet have greatly enhanced the electrical and electrochemical performance of ASCs. The electrical and electrochemical properties of ASCs were highly dependent on the protonation levels of aniline oligomers including aniline tetramer, aniline trimer, and aniline dimer. The aniline tetramer with an appropriate chain length provided higher carrier transport within the anode compared to that of the aniline dimer and trimer. The water-dispersible graphene (WDG) sheets greatly enhanced structural stability and cycle life of aniline tetramers by alleviating swelling, chain scission, and shrinking of the aniline tetramers. The ASC composed of aniline tetramer/WDG sheet exhibited high areal capacitance (62.2 mF/cm2), volumetric capacitance (207.4 F/cm3), and good cycling stability (97.2% after 2000 cycles and 90.4% after 10 000 cycles). The strategy presented in this work is simple and facile, which would give an insight into efficient ways for applying aniline tetramers and graphene sheet for state-of-art electronic applications.
| S-EPMC6648441 | biostudies-literature
Project description:Graphene spheres confining fullerene C60 are quantitatively formed under high-shear and continuous-flow processing using a vortex fluidic device (VFD). This involves intense micromixing a colloidal suspension of graphite in DMF and an o-xylene solution of C60 at room temperature in the absence of surfactants and other auxiliary substances. The diameters of the composite spheres, C60@graphene, can be controlled with size distributions ranging from 1.5 to 3.5 μm, depending on the VFD operating parameters, including rotational speed, flow rate, relative ratio of C60 to graphite, and the concentration of fullerene. An electrode of the composite material has high cycle stability, with a high areal capacitance of 103.4 mF cm-2, maintaining its capacitances to 24.7 F g-1 and 86.4 mF cm-2 (83.5%) at a high scan rate of 100 mV s-1.
| S-EPMC6868912 | biostudies-literature
Project description:The detection of dopamine in a highly sensitive and selective manner is crucial for the early diagnosis of a number of neurological diseases/disorders. Here, a report on a new platform for the electrochemical detection of dopamine with a considerable accuracy that comprises a 3D porous graphene oxide (pGO)/gold nanoparticle (GNP)/pGO composite-modified indium tin oxide (ITO) is presented. The pGO was first synthesized and purified by ultrasonication and centrifugation, and it was then further functionalized on the surface of a GNP-immobilized ITO electrode. Remarkably, owing to the synergistic effects of the pGO and GNPs, the 3D pGO-GNP-pGO-modified ITO electrode showed a superior dopamine-detection performance compared with the other pGO- or GNP-modified ITO electrodes. The linear range of the newly developed sensing platform is from 0.1 ?M to 30 ?M with a limit of detection (LOD) of 1.28 ?M, which is more precise than the other previously reported GO-functionalized electrodes. Moreover, the 3D pGO-GNP-pGO-modified ITO electrodes maintained their detection capability even in the presence of several interfering molecules (e.g., ascorbic acid, glucose). The proposed platform of the 3D pGO-GNP-pGO-modified ITO electrode could therefore serve as a competent candidate for the development of a dopamine-sensing platform that is potentially applicable for the early diagnosis of various neurological diseases/disorders.
| S-EPMC5424738 | biostudies-literature
Project description:In this work, uniform MnCo2O4.5 nanowires (NWs) on stainless steel foil (SSF) were prepared through a facile, cost-efficient, and eco-friendly hydrothermal method at 120 °C with a post-calcination process in air. The microstructure of MnCo2O4.5 samples could be tuned at different hydrothermal temperatures and quasi-cubes (QCs) were obtained in high yield at 150 °C. The MnCo2O4.5 NW powder peeled off from the SSF delivered an outstanding capacity of 248.62 C g-1 at 1 A g-1 with a capacity preservation of 179.43 C g-1 at 8 A g-1, while the QCs exhibited 177.19 and 111.73 C g-1, respectively. To assess the possibility of its actual applications, a hybrid supercapacitor (HSC) device has been assembled by utilizing these MnCo2O4.5 NWs (QCs) and activated carbon (AC) as the cathode and anode, respectively. The MnCo2O4.5 NWs//AC HSC delivered a maximum capacity up to 116.95 C g-1 and extraordinary cycling durability with only 3.56% capacity loss over 5000 cycles. Besides, the MnCo2O4.5 NWs//AC HSC achieved a maximum energy density of 25.41 W h kg-1 at a power density of 782.08 W kg-1, and for the QC-based HSC, it showed a lower energy density of 20.54 W h kg-1 at 843.34 W kg-1. These remarkable electrochemical properties demonstrate that the porous MnCo2O4.5 NWs and QCs may serve as promising cathodes for advanced hybrid supercapacitors with superior performance, and the present synthetic methodology may be applied to the preparation of other cobalt-based binary metal oxides with excellent electrochemical properties.
| S-EPMC9417046 | biostudies-literature
Project description:New ternary composites of MnO2 nanorods, polyaniline (PANI) and graphene oxide (GO) have been prepared by a two-step process. The 100 nm-long MnO2 nanorods with a diameter ~20 nm are conformably coated with PANI layers and fastened between GO layers. The MnO2 nanorods incorporated ternary composites electrode exhibits significantly increased specific capacitance than PANI/GO binary composite in supercapacitors. The ternary composite with 70% MnO2 exhibits a highest specific capacitance reaching 512 F/g and outstanding cycling performance, with ~97% capacitance retained over 5000 cycles. The ternary composite approach offers an effective solution to enhance the device performance of metal-oxide based supercapacitors for long cycling applications.
| S-EPMC4001101 | biostudies-other
Project description:An intimate physical mixture of graphene oxide (GO) and semiconducting organic molecules like bromophenathrene (BrPh) and bromopyrene (BrPy) was prepared by using a ball milling technique. The structural, microstructural, physical and chemical properties of the mixtures (20 wt% of GO) were analyzed by X-ray diffraction, SEM, FT-IR, TGA and TCSPC studies. Furthermore, the electrochemical properties like AC electrical conductivity, transient photocurrent response (PCTR) and open circuit voltage (OCVD) of the samples were analyzed. It has been observed from TCSPC and OCVD measurements that 20 wt% of GO in the semiconductor composite leads to an enhanced life-time of photo-generated charge carriers. The physical mixture composites exhibit a higher photocurrent than pure BrPh and BrPy.
| S-EPMC9088551 | biostudies-literature