Dataset Information

Evaluation of virucidal activity of residual quaternary ammonium-treated surfaces on SARS-CoV-2.

ABSTRACT:

Background

The COVID-19 pandemic has had an unprecedented impact on global health and the world's economies. Proliferation of virulent and deadly SARS-CoV-2 variants require effective transmission mitigation strategies. Under reasonable environmental conditions, culturable and infectious SARS-CoV-2 can survive on contaminated fomites from hours to months. In the present study we evaluated a surface-anchored polymeric quaternary ammonium antimicrobial to help reduce fomite transmission of SARS-CoV-2 from contaminated surfaces.

Methods

Two studies were performed on antimicrobial pre-treated metal disks in March 2020 by two independent Biosafety Level III (BSL-3) equipped laboratories in April 2020. These facilities were in Belgium (the Rega Medical Research Institute) and Australia (the Peter Doherty Institute) and independently applied quantitative carrier-based methodologies using the authentic SARS-CoV-2 isolates (hCoV-19/Australia/VIC01/2020, hCoV-19/Belgium/GHB-03021/2020).

Results

Residual dry tests were independently conducted at both facilities and demonstrated sustained virion destruction (108.23 TCID50/carrier GHB-03021 isolate, and 103.66 TCID50/carrier VIC01 isolate) 1 hour (drying) + 10 minutes after inoculation. Reductions are further supported by degradation of RNA on antimicrobial-treated surfaces using qRT-PCR.

Conclusions

Using a polymeric quaternary ammonium antimicrobial (EPA/PMRA registered) the results independently support a sustained antiviral effect via SARS-CoV-2 virion destruction and viral RNA degradation. This indicates that silane-anchored quaternary ammonium compound (SiQAC-18) treated surfaces could play an important role in mitigating the communicability and fomite transmission of SARS-CoV-2.

SUBMITTER: Caschera AG

PROVIDER: S-EPMC8553632 | biostudies-literature | 2022 Mar

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Evaluation of virucidal activity of residual quaternary ammonium-treated surfaces on SARS-CoV-2.

Caschera Alexander G AG McAuley Julie J Kim Youry Y Purcell Damian D Rymenants Jasper J Foucher Daniel A DA

American journal of infection control 20211029 3

<h4>Background</h4>The COVID-19 pandemic has had an unprecedented impact on global health and the world's economies. Proliferation of virulent and deadly SARS-CoV-2 variants require effective transmission mitigation strategies. Under reasonable environmental conditions, culturable and infectious SARS-CoV-2 can survive on contaminated fomites from hours to months. In the present study we evaluated a surface-anchored polymeric quaternary ammonium antimicrobial to help reduce fomite transmission of ...[more]

PMID: 34756967

Similar Datasets

Project description:N95 respirator face masks serve as effective physical barriers against airborne virus transmission, especially in a hospital setting. However, conventional filtration materials, such as nonwoven polypropylene fibers, have no inherent virucidal activity, and thus, the risk of surface contamination increases with wear time. The ability of face masks to protect against infection can be likely improved by incorporating components that deactivate viruses on contact. We present a facile method for covalently attaching antiviral quaternary ammonium polymers to the fiber surfaces of nonwoven polypropylene fabrics that are commonly used as filtration materials in N95 respirators via ultraviolet (UV)-initiated grafting of biocidal agents. Here, C12-quaternized benzophenone is simultaneously polymerized and grafted onto melt-blown or spunbond polypropylene fabric using 254 nm UV light. This grafting method generated ultrathin polymer coatings which imparted a permanent cationic charge without grossly changing fiber morphology or air resistance across the filter. For melt-blown polypropylene, which comprises the active filtration layer of N95 respirator masks, filtration efficiency was negatively impacted from 72.5 to 51.3% for uncoated and coated single-ply samples, respectively. Similarly, directly applying the antiviral polymer to full N95 masks decreased the filtration efficiency from 90.4 to 79.8%. This effect was due to the exposure of melt-blown polypropylene to organic solvents used in the coating process. However, N95-level filtration efficiency could be achieved by wearing coated spunbond polypropylene over an N95 mask or by fabricating N95 masks with coated spunbond as the exterior layer. Coated materials demonstrated broad-spectrum antimicrobial activity against several lipid-enveloped viruses, as well as Staphylococcus aureus and Escherichia coli bacteria. For example, a 4.3-log reduction in infectious MHV-A59 virus and a 3.3-log reduction in infectious SuHV-1 virus after contact with coated filters were observed, although the level of viral deactivation varied significantly depending on the virus strain and protocol for assaying infectivity.

Dataset Information

Evaluation of virucidal activity of residual quaternary ammonium-treated surfaces on SARS-CoV-2.

Background

Methods

Results

Conclusions

Publications

Evaluation of virucidal activity of residual quaternary ammonium-treated surfaces on SARS-CoV-2.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets