Browse
Submit Data
Databases
API
Help

Dataset Information

16 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Molecular bixbyite-like In₁₂-oxo clusters with tunable functionalization sites for lithography patterning applications.

ABSTRACT: Indium oxides have been widely applied in many technological areas, but their utilization in lithography has not been developed. Herein, we illustrated a family of unprecedented In₁₂-oxo clusters with a general formula [In₁₂(μ₄-O)₄(μ₂-OH)₂(OCH₂CH₂NHCH₂CH₂O)₈(OR)₄X₄]X₂ (where X = Cl or Br; R = CH₃, C₆H₄NO₂ or C₆H₄F), which not only present the largest size record in the family of indium-oxo clusters (InOCs), but also feature the first molecular model of bixbyite-type In₂O₃. Moreover, through the labile coordination sites of the robust diethanolamine-stabilized In₁₂-oxo core, these InOCs can be accurately functionalized with different halides and alcohol or phenol derivatives, producing tunable solubility. Based on the high solution stability as confirmed by ESI-MS analysis, homogeneous films can be fabricated using these In₁₂-oxo clusters by the spin-coating method, which can be further used for electron beam lithography (EBL) patterning studies. Accordingly, the above structural regulations have significantly influenced their corresponding film quality and patterning performance, with bromide or p-nitrophenol functionalized In₁₂-oxo clusters displaying better performance of sub-50 nm lines. Thus, the here developed bixbyite-type In₁₂-oxo cluster starts the research on indium-based patterning materials and provides a new platform for future lithography radiation mechanism studies.

SUBMITTER: Yi X

PROVIDER: S-EPMC8580043 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Sub-100 nm patterning of supported bilayers by nanoshaving lithography.

Project description:Sub-100 nm wide supported phospholipid bilayers (SLBs) were patterned on a planar borosilicate substrate by AFM-based nanoshaving lithography. First, a bovine serum albumin monolayer was coated on the glass and then selectively removed in long strips by an AFM tip. The width of vacant strips could be controlled down to 15 nm. Bilayer lines could be formed within the vacant strips by vesicle fusion. It was found that stable bilayers formed by this method had a lower size limit of approximately 55 nm in width. This size limit stems from a balance between a favorable bilayer adhesion energy and an unfavorable bilayer edge energy.

| S-EPMC3475159 | biostudies-literature

Sub-15-nm patterning of asymmetric metal electrodes and devices by adhesion lithography.

Project description:Coplanar electrodes formed from asymmetric metals separated on the nanometre length scale are essential elements of nanoscale photonic and electronic devices. Existing fabrication methods typically involve electron-beam lithography--a technique that enables high fidelity patterning but suffers from significant limitations in terms of low throughput, poor scalability to large areas and restrictive choice of substrate and electrode materials. Here, we describe a versatile method for the rapid fabrication of asymmetric nanogap electrodes that exploits the ability of selected self-assembled monolayers to attach conformally to a prepatterned metal layer and thereby weaken adhesion to a subsequently deposited metal film. The method may be carried out under ambient conditions using simple equipment and a minimum of processing steps, enabling the rapid fabrication of nanogap electrodes and optoelectronic devices with aspect ratios in excess of 100,000.

| S-EPMC4050269 | biostudies-literature

Sub-10 nm feature chromium photomasks for contact lithography patterning of square metal ring arrays.

Project description:Advances in photolithographic processes have allowed semiconductor industries to manufacture smaller and denser chips. As the feature size of integrated circuits becomes smaller, there has been a growing need for a photomask embedded with ever narrower patterns. However, it is challenging for electron beam lithography to obtain <10 nm linewidths with wafer scale uniformity and a necessary speed. Here, we introduce a photolithography-based, cost-effective mask fabrication method based on atomic layer deposition and overhang structures for sacrificial layers. Using this method, we obtained sub-10 nm square ring arrays of side length 50 μm, and periodicity 100 μm on chromium film, on 1 cm by 1 cm quartz substrate. These patterns were then used as a contact-lithography photomask using 365 nm I-line, to generate metal ring arrays on silicon substrate.

| S-EPMC4812291 | biostudies-other

Metal hierarchical patterning by direct nanoimprint lithography.

Project description:Three-dimensional hierarchical patterning of metals is of paramount importance in diverse fields involving photonics, controlling surface wettability and wearable electronics. Conventionally, this type of structuring is tedious and usually involves layer-by-layer lithographic patterning. Here, we describe a simple process of direct nanoimprint lithography using palladium benzylthiolate, a versatile metal-organic ink, which not only leads to the formation of hierarchical patterns but also is amenable to layer-by-layer stacking of the metal over large areas. The key to achieving such multi-faceted patterning is hysteretic melting of ink, enabling its shaping. It undergoes transformation to metallic palladium under gentle thermal conditions without affecting the integrity of the hierarchical patterns on micro- as well as nanoscale. A metallic rice leaf structure showing anisotropic wetting behavior and woodpile-like structures were thus fabricated. Furthermore, this method is extendable for transferring imprinted structures to a flexible substrate to make them robust enough to sustain numerous bending cycles.

| S-EPMC3584315 | biostudies-literature

Discovery and Supramolecular Interactions of Neutral Palladium-Oxo Clusters Pd16 and Pd24.

Project description:We report on the synthesis, structure, and physicochemical characterization of the first three examples of neutral palladium-oxo clusters (POCs). The 16-palladium(II)-oxo cluster [Pd16 O24 (OH)8 ((CH3 )2 As)8 ] (Pd16 ) comprises a cyclic palladium-oxo unit capped by eight dimethylarsinate groups. The chloro-derivative [Pd16 Na2 O26 (OH)3 Cl3 ((CH3 )2 As)8 ] (Pd16 Cl) was also prepared, which forms a highly stable 3D supramolecular lattice via strong intermolecular interactions. The 24-palladium(II)-oxo cluster [Pd24 O44 (OH)8 ((CH3 )2 As)16 ] (Pd24 ) can be considered as a bicapped derivative of Pd16 with a tetra-palladium-oxo unit grafted on either side. The three compounds were fully characterized 1) in the solid state by single-crystal and powder XRD, IR, TGA, and solid-state 1 H and 13 C NMR spectroscopy, 2) in solution by 1 H, 13 C NMR and 1 H DOSY spectroscopic methods, and 3) in the gas phase by electrospray ionization mass spectrometry (ESI-MS).

| S-EPMC7898824 | biostudies-literature

Selectively Patterning Polymer Opal Films via Microimprint Lithography.

Project description:Large-scale structural color flexible coatings have been hard to create, and patterning color on them is key to many applications, including large-area strain sensors, wall-size displays, security devices, and smart fabrics. To achieve controlled tuning, a micro-imprinting technique is applied here to pattern both the surface morphology and the structural color of the polymer opal films (POFs). These POFs are made of 3D ordered arrays of hard spherical particles embedded inside soft shells. The soft outer shells cause the POFs to deform upon imprinting with a pre-patterned stamp, driving a flow of the soft polymer and a rearrangement of the hard spheres within the films. As a result, a patterned surface morphology is generated within the POFs and the structural colors are selectively modified within different regions. These changes are dependent on the pressure, temperature, and duration of imprinting, as well as the feature sizes in the stamps. Moreover, the pattern geometry and structural colors can then be further tuned by stretching. Micropattern color generation upon imprinting depends on control of colloidal transport in a polymer matrix under shear flow and brings many potential properties including stretchability and tunability, as well as being of fundamental interest.

| S-EPMC4497474 | biostudies-literature

Single molecule protein patterning using hole mask colloidal lithography.

Project description:The ability to manipulate single protein molecules on a surface is useful for interfacing biology with many types of devices in optics, catalysis, bioengineering, and biosensing. Control of distance, orientation, and activity at the single molecule level will allow for the production of on-chip devices with increased biological activity. Cost effective methodologies for single molecule protein patterning with tunable pattern density and scalable coverage area remain a challenge. Herein, Hole Mask Colloidal Lithography is presented as a bench-top colloidal lithography technique that enables a glass coverslip to be patterned with functional streptavidin protein onto patches from 15-200 nm in diameter with variable pitch. Atomic force microscopy (AFM) was used to characterize the size of the patterned features on the glass surface. Additionally, single-molecule fluorescence microscopy was used to demonstrate the tunable pattern density, measure binding controls, and confirm patterned single molecules of functional streptavidin.

| S-EPMC6848977 | biostudies-literature

Water-Soluble Chalcogenide W6-Clusters: On the Way to Biomedical Applications.

Project description:Despite the great potential of octahedral tungsten cluster complexes in fields of biomedical applications such as X-ray computed tomography or angiography, there is only one example of a water-soluble W6Q8-cluster that has been reported in the literature. Herein we present the synthesis and a detailed characterization including X-ray structural analysis, NMR, IR, UV-Vis spectroscopies, HR-MS spectrometry, and the electrochemical behavior of two new cluster complexes of the general formula W6Q8L6 with phosphine ligands containing a hydrophilic carboxylic group, which makes the complexes soluble in an aqueous medium. The hydrolytic stability of the clusters' aqueous solutions allows us to investigate for the first time the influence of W6-clusters on cell viability. The results obtained clearly demonstrate their very low cytotoxicity, comparable to the least-toxic clusters presented in the literature.

| S-EPMC9369320 | biostudies-literature

Functionalization of octaspherosilicate (HSiMe2O)8Si8O12 with buta-1,3-diynes by hydrosilylation.

Project description:Hydrosilylation with octaspherosilicate (HSiMe2O)8Si8O12 (1) has provided hundreds of molecular and macromolecular systems so far, making this method the most popular in the synthesis of siloxane-based, nanometric, cubic, and reactive building blocks. However, there are no reports on its selective reaction with 1,3-diynes, which allows for the formation of new products with unique properties. Therefore, herein we present an efficient protocol for monohydrosilylation of symmetrically and non-symmetrically 1,4-disubstituted buta-1,3-diynes with 1. The compounds obtained bear double and triple bonds and other functionalities (e.g., Br, F, OH, SiR3), making them highly desirable, giant building blocks in organic synthesis and material chemistry. These compounds were fully characterized by 1H, 13C, 29Si, 1D NOE, 1H-13C HSQC NMR, FT-IR, and MALDI TOF MS, EA, UV-Vis, and TGA analysis. The TGA proved their high thermal stability up to 427 ℃ (Td10%) for compound 3j.

| S-EPMC10471723 | biostudies-literature

Wafer-scale bioactive substrate patterning by chemical lift-off lithography.

Project description:The creation of bioactive substrates requires an appropriate interface molecular environment control and adequate biological species recognition with minimum nonspecific attachment. Herein, a straightforward approach utilizing chemical lift-off lithography to create a diluted self-assembled monolayer matrix for anchoring diverse biological probes is introduced. The strategy encompasses convenient operation, well-tunable pattern feature and size, large-area fabrication, high resolution and fidelity control, and the ability to functionalize versatile bioarrays. With the interface-contact-induced reaction, a preformed alkanethiol self-assembled monolayer on a Au surface is ruptured and a unique defect-rich diluted matrix is created. This post lift-off region is found to be suitable for insertion of a variety of biological probes, which allows for the creation of different types of bioactive substrates. Depending on the modifications to the experimental conditions, the processes of direct probe insertion, molecular structure change-required recognition, and bulky biological species binding are all accomplished with minimum nonspecific adhesion. Furthermore, multiplexed arrays via the integration of microfluidics are also achieved, which enables diverse applications of as-prepared substrates. By embracing the properties of well-tunable pattern feature dimension and geometry, great local molecular environment control, and wafer-scale fabrication characteristics, this chemical lift-off process has advanced conventional bioactive substrate fabrication into a more convenient route.

| S-EPMC5789397 | biostudies-literature