Browse
Submit Data
Databases
API
Help

Dataset Information

26 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

One-step ethylene production from a four-component gas mixture by a single physisorbent

ABSTRACT: One-step adsorptive purification of ethylene (C2H4) from four-component gas mixtures comprising acetylene (C2H2), ethylene (C2H4), ethane (C2H6) and carbon dioxide (CO2) is an unmet challenge in the area of commodity purification. Herein, we report that the ultramicroporous sorbent Zn-atz-oba (H2oba = 4,4-dicarboxyl diphenyl ether; Hatz = 3-amino-1,2,4-triazole) enables selective adsorption of C2H2, C2H6 and CO2 over C2H4 thanks to the binding sites that lie in its undulating pores. Molecular simulations provide insight into the binding sites in Zn-atz-oba that are responsible for coadsorption of C2H2, C2H6 and CO2 over C2H4. Dynamic breakthrough experiments demonstrate that the selective binding exhibited by Zn-atz-oba can produce polymer-grade purity (>99.95%) C2H4 from binary (1:1 for C2H4/C2H6), ternary (1:1:1 for C2H2/C2H4/C2H6) and quaternary (1:1:1:1 for C2H2/C2H4/C2H6/CO2) gas mixtures in a single step. The purification of ethylene is an industrially relevant process. Here, the authors report the one-step separation of ethylene from quaternary gas mixtures of hydrocarbons and CO2 using a single metal–organic framework-based physisorbent.

SUBMITTER: Cao J

PROVIDER: S-EPMC8586343 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Pore Engineering for One-Step Ethylene Purification from a Three-Component Hydrocarbon Mixture.

Project description:Ethylene production from C2 hydrocarbon mixtures through one separation step is desirable but challenging because of the similar size and physical properties of acetylene, ethylene, and ethane. Herein, we report three new isostructural porous coordination networks (NPU-1, NPU-2, NPU-3; NPU represents Northwestern Polytechnical University) that are sustained by 9-connected nodes based upon a hexanuclear metal cluster of composition [Mn6(μ3-O)2(CH3COO)3]6+. NPU-1/2/3 exhibit a dual cage structure that was systematically fine-tuned in terms of cage size to realize selective adsorption of C2H2 and C2H6 over C2H4. Dynamic breakthrough experiments demonstrated that NPU-1 produces ethylene in >99.9% purity from a three-component gas mixture (1:1:1 C2H2/C2H4/C2H6). Molecular modeling studies revealed that the dual adsorption preference for C2H2 and C2H6 over C2H4 originates from (a) strong hydrogen-bonding interactions between electronegative carboxylate O atoms and C2H2 molecules in one cage and (b) multiple non-covalent interactions between the organic linkers of the host network and C2H6 molecules in the second cage.

| S-EPMC8297724 | biostudies-literature

Amino-Functionalised Hybrid Ultramicroporous Materials that Enable Single-Step Ethylene Purification from a Ternary Mixture.

Project description:Pyrazine-linked hybrid ultramicroporous (pore size <7 Å) materials (HUMs) offer benchmark performance for trace carbon capture thanks to strong selectivity for CO2 over small gas molecules, including light hydrocarbons. That the prototypal pyrazine-linked HUMs are amenable to crystal engineering has enabled second generation HUMs to supersede the performance of the parent HUM, SIFSIX-3-Zn, mainly through substitution of the metal and/or the inorganic pillar. Herein, we report that two isostructural aminopyrazine-linked HUMs, MFSIX-17-Ni (17=aminopyrazine; M=Si, Ti), which we had anticipated would offer even stronger affinity for CO2 than their pyrazine analogs, unexpectedly exhibit reduced CO2 affinity but enhanced C2 H2 affinity. MFSIX-17-Ni are consequently the first physisorbents that enable single-step production of polymer-grade ethylene (>99.95 % for SIFSIX-17-Ni) from a ternary equimolar mixture of ethylene, acetylene and CO2 thanks to coadsorption of the latter two gases. We attribute this performance to the very different binding sites in MFSIX-17-Ni versus SIFSIX-3-Zn.

| S-EPMC8252428 | biostudies-literature

A one-step, atom economical synthesis of thieno[2,3-d]pyrimidin-4-amine derivatives via a four-component reaction.

Project description:A Na2HPO4-catalyzed four-component reaction between a ketone, malononitrile, S8 and formamide has been realized for the first time. This reaction provides a concise approach to thieno[2,3-d]pyrimidin-4-amines, previously requiring 5 steps. The utility of this reaction was validated by preparing a multi-targeted kinase inhibitor and an inhibitor of the NRF2 pathway with excellent atom- and step-economy.

| S-EPMC6922009 | biostudies-literature

One step fabrication of aligned carbon nanotubes using gas rectifier.

Project description:We report the one-step fabrication of aligned and high-quality carbon nanotubes (CNTs) using floating-catalyst chemical vapor deposition (FCCVD) with controlled fluidic properties assisted by a gas rectifier. The gas rectifier consists of one-dimensional straight channels for regulating the Reynolds number of the reaction gas. Our computational fluid dynamics simulation reveals that the narrow channels of the gas rectifier provide steady and accelerated laminar flow of the reaction gas. In addition, strong shear stress is induced near the side wall of the channels, resulting in the spontaneous formation of macroscopic CNT bundles aligned along the direction of the gas flow. After a wet-process using chlorosulfonic acid, the inter-tube voids inherently observed in as-grown CNT bundles are reduced from 16 to 0.3%. The resulting CNT fiber exhibits a tensile strength of 2.1 ± 0.1 N tex-1 with a Young's modulus of 39 ± 4 N tex-1 and an elongation of 6.3 ± 0.6%. FCCVD coupled with the strong shear stress of the reaction gas is an important pre-processing route for the fabrication of high-performance CNT fibers.

| S-EPMC8789815 | biostudies-literature

Continuous flow production of concentrated hyperpolarized xenon gas from a dilute xenon gas mixture by buffer gas condensation.

Project description:We present a new method for the continuous flow production of concentrated hyperpolarized xenon-129 (HP 129Xe) gas from a dilute xenon (Xe) gas mixture with high nuclear spin polarization. A low vapor pressure (i.e., high boiling-point) gas was introduced as an alternative to molecular nitrogen (N2), which is the conventional quenching gas for generating HP 129Xe via Rb-Xe spin-exchange optical-pumping (SEOP). In contrast to the generally used method of extraction by freezing Xe after the SEOP process, the quenching gas separated as a liquid at moderately low temperature so that Xe was maintained in its gaseous state, allowing the continuous delivery of highly polarized concentrated Xe gas. We selected isobutene as the candidate quenching gas and our method was demonstrated experimentally while comparing its performance with N2. Isobutene could be liquefied and removed from the Xe gas mixture using a cold trap, and the concentrated HP 129Xe gas exhibited a significantly enhanced nuclear magnetic resonance (NMR) signal. Although the system requires further optimization depending on the intended purpose, our approach presented here could provide a simple means for performing NMR or magnetic resonance imaging (MRI) measurements continuously using HP 129Xe with improved sensitivity.

| S-EPMC5544720 | biostudies-other

Single-layer graphene membranes by crack-free transfer for gas mixture separation.

Project description:The single-layer graphene film, when incorporated with molecular-sized pores, is predicted to be the ultimate membrane. However, the major bottlenecks have been the crack-free transfer of large-area graphene on a porous support, and the incorporation of molecular-sized nanopores. Herein, we report a nanoporous-carbon-assisted transfer technique, yielding a relatively large area (1 mm2), crack-free, suspended graphene film. Gas-sieving (H2/CH4 selectivity up to 25) is observed from the intrinsic defects generated during the chemical-vapor deposition of graphene. Despite the ultralow porosity of 0.025%, an attractive H2 permeance (up to 4.1 × 10-7 mol m-2 s-1 Pa-1) is observed. Finally, we report ozone functionalization-based etching and pore-modification chemistry to etch hydrogen-selective pores, and to shrink the pore-size, improving H2 permeance (up to 300%) and H2/CH4 selectivity (up to 150%). Overall, the scalable transfer, etching, and functionalization methods developed herein are expected to bring nanoporous graphene membranes a step closer to reality.

| S-EPMC6035196 | biostudies-literature

Rapid, One-step Sample Processing for Label-Free Single-Cell Proteomics

Project description:Sample preparation for single-cell proteomics is generally performed in a one-pot workflow with multiple dispensing and incubation steps. These hours-long workflows can be labor intensive and lead to long sample-to-answer times. Here we report a sample processing method that achieves cell lysis, protein denaturation and digestion in one hour with a single reagent dispensing step using commercially available high-temperature-stabilized proteases. Four different one-step reagent compositions were evaluated, and the mixture providing greatest proteome coverage was compared to the previously employed multi-step workflow. The one-step preparation increases proteome coverage relative to the multi-step workflow while minimizing labor input and the possibility of human error. We also compared sample recovery between previously used microfabricated glass nanowell chips and injection-molded polypropylene substrates, and found the polypropylene provided improved proteome coverage. Combined, the one-step sample preparation and the polypropylene substrates enabled identification of an average of nearly 2,400 proteins per cell using a standard data-dependent workflow with an Orbitrap mass spectrometer. As such, these advances significantly simplify sample preparation for single-cell proteomics and broaden accessibility with no compromise in terms of proteome coverage.

2023-10-09 | PXD041879 | Pride

Growth of carbon nanowalls at atmospheric pressure for one-step gas sensor fabrication.

Project description:Carbon nanowalls (CNWs), two-dimensional "graphitic" platelets that are typically oriented vertically on a substrate, can exhibit similar properties as graphene. Growth of CNWs reported to date was exclusively carried out at a low pressure. Here, we report on the synthesis of CNWs at atmosphere pressure using "direct current plasma-enhanced chemical vapor deposition" by taking advantage of the high electric field generated in a pin-plate dc glow discharge. CNWs were grown on silicon, stainless steel, and copper substrates without deliberate introduction of catalysts. The as-grown CNW material was mainly mono- and few-layer graphene having patches of O-containing functional groups. However, Raman and X-ray photoelectron spectroscopies confirmed that most of the oxygen groups could be removed by thermal annealing. A gas-sensing device based on such CNWs was fabricated on metal electrodes through direct growth. The sensor responded to relatively low concentrations of NO2 (g) and NH3 (g), thus suggesting high-quality CNWs that are useful for room temperature gas sensors.PACS: Graphene (81.05.ue), Chemical vapor deposition (81.15.Gh), Gas sensors (07.07.Df), Atmospheric pressure (92.60.hv).

| S-EPMC3211258 | biostudies-literature

Gas-Shearing Fabrication of Multicompartmental Microspheres: A One-Step and Oil-Free Approach.

Project description:Multicompartmental microparticles (MCMs) have attracted considerable attention in biomedical engineering and materials sciences, as they can carry multiple materials in the separated phases of a single particle. However, the robust fabrication of monodisperse, highly compartmental MCMs at the micro- and nanoscales remains challenging. Here, a simple one-step and oil-free process, based on the gas-flow-assisted formation of microdroplets ("gas-shearing"), is established for the scalable production of monodisperse MCMs. By changing the configuration of the needle system and gas flow in the spray ejector device, the oil-free gas-shearing process easily allows the design of microparticles consisting of two, four, six, and even eight compartments with a precise control over the properties of each compartment. As oils and surfactants are not used, the gas-shearing method is highly cytocompatible. The versatile applications of such MCMs are demonstrated by producing a magnetic microrobot and a biocompatible carrier for the coculturing of cells. This research suggests that the oil-free gas-shearing strategy is a reliable, scalable, and biofriendly process for producing MCMs that may become attractive materials for biomedical applications.

| S-EPMC6498303 | biostudies-literature

Etching gas-sieving nanopores in single-layer graphene with an angstrom precision for high-performance gas mixture separation.

Project description:One of the bottlenecks in realizing the potential of atom-thick graphene membrane for gas sieving is the difficulty in incorporating nanopores in an otherwise impermeable graphene lattice, with an angstrom precision at a high-enough pore density. We realize this design by developing a synergistic, partially decoupled defect nucleation and pore expansion strategy using O2 plasma and O3 treatment. A high density (ca. 2.1 × 1012 cm-2) of H2-sieving pores was achieved while limiting the percentage of CH4-permeating pores to 13 to 22 parts per million. As a result, a record-high gas mixture separation performance was achieved (H2 permeance, 1340 to 6045 gas permeation units; H2/CH4 separation factor, 15.6 to 25.1; H2/C3H8 separation factor, 38.0 to 57.8). This highly scalable pore etching strategy will accelerate the development of single-layer graphene-based energy-efficient membranes.

| S-EPMC6357726 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data