Browse
Submit Data
Databases
API
Help

Dataset Information

20 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Development of Antibacterial Biocomposites Based on Poly(lactic acid) with Spice Essential Oil (Pimpinella anisum) for Food Applications

ABSTRACT: Among the main biodegradable food packaging materials, poly-lactic acid (PLA) is a commercially successful polymer used notably in the food packaging industry. In this study, active PLA films containing different percentage of anise essential oil (AE) (0, 0.5, 1 and 1.5% v/v) were developed, and characterized by physical, mechanical and antibacterial analysis. Based on physical examinations, thermal stability of PLA/AE films was greater than the neat PLA film, and the minimum water vapor permeability (WVP) was recorded for PLA/0.5AE film (1.29 × 10−11 g/m s Pa), while maximum WVP was observed for PLA/1.5AE (2.09 × 10−11 g/m s Pa). Moreover, the lightness and yellowness of the composites were decreased by the addition of AE. For the PLA composites with 1.5% AE, the tensile strength decreased by 35% and the elongation break increased by 28.09%, comparing to the pure PLA. According to the antibacterial analysis, the minimum inhibitory concentrations of PLA/AE film were 5 to 100 mg/mL and the active composite could create visible inhibition zones of 14.2 to 19.2 mm. Furthermore, the films containing AE inhibited L. monocytogenes and V. parahaemolyticus in a concentration-dependent manner. The confirmation of the success of the incorporation of EOs into the PLA films was further evaluated using principal component analysis, where positive results were obtained. In this context, our findings suggest the significant potency of AE to be used as an antibacterial agent in active food packaging.

SUBMITTER: Noori N

PROVIDER: S-EPMC8587201 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Creep Behavior of Poly(lactic acid) Based Biocomposites.

Project description:Polymer composites containing natural fibers are receiving growing attention as possible alternatives for composites containing synthetic fibers. The use of biodegradable matrices obtained from renewable sources in replacement for synthetic ones is also increasing. However, only limited information is available about the creep behavior of the obtained composites. In this work, the tensile creep behavior of PLA based composites, containing flax and jute twill weave woven fabrics, produced through compression molding, was investigated. Tensile creep tests were performed at different temperatures (i.e., 40 and 60 °C). The results showed that the creep behavior of the composites is strongly influenced by the temperature and the woven fabrics used. As preliminary characterization, quasi-static tensile tests and dynamic mechanical tests were carried out on the composites. Furthermore, fabrics (both flax and jute) were tested as received by means of quasi-static tests and creep tests to evaluate the influence of fabrics mechanical behavior on the mechanical response of the resulting composites. The morphological analysis of the fracture surface of the tensile samples showed the better fiber-matrix adhesion between PLA and jute fabric.

| S-EPMC5506976 | biostudies-other

Mechanical and Physicochemical Properties of 3D-Printed Agave Fibers/Poly(lactic) Acid Biocomposites.

Project description:In order to provide a second economic life to agave fibers, an important waste material from the production of tequila, filaments based on polylactic acid (PLA) were filled with agave fibers (0, 3, 5, 10 wt%), and further utilized to produce biocomposites by fused deposition modeling (FDM)-based 3D printing at two raster angles (-45°/45° and 0°/90°). Differential scanning calorimetry, water uptake, density variation, morphology, and composting of the biocomposites were studied. The mechanical properties of the biocomposites (tensile, flexural, and Charpy impact properties) were determined following ASTM international norms. The addition of agave fibers to the filaments increased the crystallinity value from 23.7 to 44.1%. However, the fibers generated porous structures with a higher content of open cells and lower apparent densities than neat PLA pieces. The printing angle had a low significant effect on flexural and tensile properties, but directly affected the morphology of the printed biocomposites, positively influenced the impact strength, and slightly improved the absorption values for biocomposites printed at -45°/45°. Overall, increasing the concentrations of agave fibers had a detrimental effect on the mechanical properties of the biocomposites. The disintegration of the biocomposites under simulated composting conditions was slowed 1.6-fold with the addition of agave fibers, compared to neat PLA.

| S-EPMC8201365 | biostudies-literature

In Situ Cellulose Nanocrystal-Reinforced Glycerol-Based Biopolyester for Enhancing Poly(lactic acid) Biocomposites.

Project description:Biobased, elastomeric polymer poly(glycerol succinate-co-maleate) (PGSMA) was produced using a "green" synthesis with added cellulose nanocrystals (CNCs) to create a novel PGSMA-CNC material. PGSMA-CNC was synthesized with the aim of developing a new strategy for successfully dispersing CNCs within a poly(lactic acid) (PLA) matrix for optimal reinforcement of tensile strength and modulus while having the added benefit of the proven toughness enhancements of PLA/PGSMA blends. Optical microscopy and fractionation in tetrahydrofuran showed that CNCs agglomerated during PGSMA-CNC synthesis and remained in agglomerates during PLA/PGSMA-CNC reactive blending. Fourier transform infrared, differential scanning calorimetry, and dynamic mechanical analyses also showed that PGSMA-CNC inhibited the formation of PGSMA crosslinks and PLA-g-PGSMA during reactive blending. These two effects resulted in loss of impact strength and only a 4% increase in tensile modulus over PLA/PGSMA at the highest CNC content. Further work in preventing CNC aggregation could help improve mechanical properties of the final blend.

| S-EPMC6641599 | biostudies-literature

Mechanically Robust, Flame-Retardant Poly(lactic acid) Biocomposites via Combining Cellulose Nanofibers and Ammonium Polyphosphate.

Project description:Expanding the application range of flame-retardant polymer biocomposites remains a huge challenge for a sustainable society. Despite largely enhanced flame retardancy, until now the resultant poly(lactic acid) (PLA) composites still suffer reduced tensile strength and impact toughness due to improper material design strategies. We, herein, demonstrate the design of a green flame retardant additive (ammonium polyphosphate (APP)@cellulose nanofiber (CNF)) via using the cellulose nanofibers (CNFs) as the green multifunctional additives hybridized with ammonium polyphosphate (APP). The results show that PLA composite with 5 wt % loading of APP@CNF can pass the UL-94 V-0 rating, besides a high limited oxygen index of 27.5%, indicative of a significantly enhanced flame retardancy. Moreover, the 5 wt % of APP@CNF enables the impact strength (?i) of the PVA matrix to significantly improve from 7.63 to 11.8 kJ/m2 (increase by 54%), in addition to a high tensile strength of 50.3 MPa for the resultant flame-retardant PLA composite. The enhanced flame retardancy and mechanical strength performances are attributed to the improved dispersion of APP@CNF and its smaller phase size within the PLA matrix along with their synergistic effect between APP and CNF. This work opens up a facile innovative methodology for the design of high-performance ecofriendly flame retardants and their advanced polymeric composites.

| S-EPMC6641890 | biostudies-literature

Chitosan nanofiber biocomposites for potential wound healing applications: Antioxidant activity with synergic antibacterial effect

Project description:Abstract Bacterial wound infection is one of the most common nosocomial infections. The unnecessary employment of antibiotics led to raising the growth of antibiotic‐resistant bacteria. Accordingly, alternative armaments capable of accelerating wound healing along with bactericidal effects are urgently needed. Considering this, we fabricated chitosan (CS)/polyethylene oxide (PEO) nanofibers armed with antibacterial silver and zinc oxide nanoparticles. The nanocomposites exhibited a high antioxidant effect and antibacterial activity against Staphylococcus aureus, Escherichia coli, and Pseudomonas aeruginosa. Besides, based on the results of the cell viability assays, the optimum concentration of ZnONPs and AgNPs in the nanofibrous mats is 0.2% w/v and 0.08% w/v respectively and had no cytotoxicity on fibroblast cells. The scaffold also showed good blood compatibility according to the effects of coagulation time. As well as significant fibroblast migration and proliferation on the wound margin, according to wound‐healing assay. All in all, the developed biocompatible, antioxidant, and antibacterial Ag‐ZnO NPs incorporated CS/PEO nanofibrous mats showed their potential as an effective wound dressing.

| S-EPMC8780905 | biostudies-literature

Biopolymer Blends of Poly(lactic acid) and Poly(hydroxybutyrate) and Their Functionalization with Glycerol Triacetate and Chitin Nanocrystals for Food Packaging Applications.

Project description:Polylactic acid (PLA) is a biopolymer that has potential for use in food packaging applications; however, its low crystallinity and poor gas barrier properties limit its use. This study aimed to increase the understanding of the structure property relation of biopolymer blends and their nanocomposites. The crystallinity of the final materials and their effect on barrier properties was studied. Two strategies were performed: first, different concentrations of poly(hydroxybutyrate) (PHB; 10, 25, and 50 wt %) were compounded with PLA to facilitate the PHB spherulite development, and then, for further increase of the overall crystallinity, glycerol triacetate (GTA) functionalized chitin nanocrystals (ChNCs) were added. The PLA:PHB blend with 25 wt % PHB showed the formation of many very small PHB spherulites with the highest PHB crystallinity among the examined compositions and was selected as the matrix for the ChNC nanocomposites. Then, ChNCs with different concentrations (0.5, 1, and 2 wt %) were added to the 75:25 PLA:PHB blend using the liquid-assisted extrusion process in the presence of GTA. The addition of the ChNCs resulted in an improvement in the crystallization rate and degree of PHB crystallinity as well as mechanical properties. The nanocomposite with the highest crystallinity resulted in greatly decreased oxygen (O) and carbon dioxide (CO2) permeability and increased the overall mechanical properties compared to the blend with GTA. This study shows that the addition ChNCs in PLA:PHB can be a possible way to reach suitable gas barrier properties for food packaging films.

| S-EPMC9469702 | biostudies-literature

Miscibility and Performance Evaluation of Biocomposites Made from Polypropylene/Poly(lactic acid)/Poly(hydroxybutyrate-co-hydroxyvalerate) with a Sustainable Biocarbon Filler.

Project description:The incorporation of poly(lactic acid) (PLA) and poly(hydroxybutyrate-co-hydroxyvalerate) (PHBV) as a partial biobased polymer substitute for polypropylene (PP) was investigated. The ternary blends were prepared through melt compounding extrusion followed by injection molding techniques with a constant biopolymer ratio of 30 wt %. Further addition of pyrolyzed miscanthus-based carbon was carried out to establish a contrast between talc-filled PP. When the morphology of the biopolymer minor phase was analyzed theoretically using contact angle for interfacial tension and spreading coefficient values along with solubility parameter calculations and via scanning electron microscopy imaging, the core-shell architecture was found with the PHBV encasing the PLA phase. Mechanical testing of the materials showed that only the tensile properties were reduced for all samples, whereas the impact strength was increased above the neat PP. With inclusion of the biobased carbon filler into the blend system, the thermomechanical properties were elevated above that of the PP matrix. The final properties of the multiphase polymeric composites are found to be related to the morphology obtained and inherent properties of the individual constituents.

| S-EPMC6044961 | biostudies-literature

Surface Functional Poly(lactic Acid) Electrospun Nanofibers for Biosensor Applications.

Project description:In this work, biotin surface functionalized hydrophilic non-water-soluble biocompatible poly(lactic acid) (PLA) nanofibers are created for their potential use as biosensors. Varying concentrations of biotin (up to 18 weight total percent (wt %)) were incorporated into PLA fibers together with poly(lactic acid)-block-poly(ethylene glycol) (PLA-b-PEG) block polymers. While biotin provided surface functionalization, PLA-b-PEG provided hydrophilicity to the final fibers. Morphology and surface-available biotin of the final fibers were studied by Field Emission Scanning Electron Microscopy (FESEM) and competitive colorimetric assays. The incorporation of PLA-b-PEG block copolymers not only decreased fiber diameters but also dramatically increased the amount of biotin available at the fiber surface able to bind avidin. Finally, fiber water stability tests revealed that both biotin and PLA-b-PEG, migrated to the aqueous phase after relatively extended periods of water exposure. The functional hydrophilic nanofiber created in this work shows a potential application as a biosensor for point-of-care diagnostics.

| S-EPMC5456551 | biostudies-literature

Randomized clinical trial of a phytotherapic compound containing Pimpinella anisum, Foeniculum vulgare, Sambucus nigra, and Cassia augustifolia for chronic constipation.

Project description:A phytotherapic compound containing Pimpinella anisum L., Foeniculum vulgare Miller, Sambucus nigra L., and Cassia augustifolia is largely used in Brazil for the treatment of constipation. However, the laxative efficacy of the compound has never been tested in a randomized clinical trial. The aim of this study was to evaluate the efficacy and safety of the product.This randomized, crossover, placebo-controlled, single-blinded trial included 20 patients presenting with chronic constipation according to the criteria of the American Association of Gastroenterology. The order of treatments was counterbalanced across subjects: half of the subjects received the phytotherapic compound for a 5-day period, whereas the other half received placebo for the same period. Both treatment periods were separated by a 9-day washout period followed by the reverse treatment for another 5-day period. The primary endpoint was colonic transit time (CTT), measured radiologically. Secondary endpoints included number of evacuations per day, perception of bowel function, adverse effects, and quality of life.Mean CTT assessed by X ray was 15.7 hours (95%CI 11.1-20.2) in the active treatment period and 42.3 hours (95%CI 33.5-51.1) during the placebo treatment (p < 0.001). Number of evacuations per day increased during the use of active tea; significant differences were observed as of the second day of treatment (p < 0.001). Patient perception of bowel function was improved (p < 0.01), but quality of life did not show significant differences among the study periods. Except for a small reduction in serum potassium levels during the active treatment, no significant differences were observed in terms of adverse effects throughout the study period.The findings of this randomized controlled trial allow to conclude that the phytotherapic compound assessed has laxative efficacy and is a safe alternative option for the treatment of constipation.ClinicalTrial.gov NCT00872430.

| S-EPMC2874511 | biostudies-literature

Assessment of Antidepressant-like, Anxiolytic Effects and Impact on Memory of Pimpinella anisum L. Total Extract on Swiss Albino Mice.

Project description:Mental disorders are psychological symptoms that impact multiple areas of an individual's life. Depression and anxiety are chronic illnesses described as the most prevalent stress-related mood disorders that cause injury and early death. In Morocco, Anise "Pimpinella anisum L." is one of the most traditionally used condiment plants, which has long been used to cure various illnesses and in phytotherapy. The present study was designed to investigate the antidepressant, anxiolytic, and memory impact of the total extract of Pimpinella anisum (PATE) at the doses of 100 and 200 mg/kg, using the Forced Swimming Test (FST), Tail Suspension Test (TST), Open Field Test (OFT), and Light-Dark Box Test (LDBT) as an experimental paradigm of anxiety and depression, and Novel Object Recognition Test (NORT) and the Morris Water Maze Test (MWMT) as memory tests on Swiss albino mice. The tests were carried out on the 1st, 7th, 14th, and the 21st days of the study, and the extract groups were compared with normal controls and positive controls (receiving bromazepam and paroxetine at the doses of 1 mg/kg and 11.5 mg/kg for anxiety and depression, respectively). The daily oral gavage of the mice by the PATE induced a significant anxiolytic and antidepressant-like effect by shortening immobility time and decreasing downtime in the different tests. PATE at both doses was shown to have no impact on memory following the NORT and MWM tests. Different compounds, such as gallic acid, catechin, chlorogenic acid, caffeic acid, oleuropein, p-coumaric acid, trans-4-hydroxy-3-methoxycinnamic acid, myricetin, and quercetin, were identified during the phytochemical analysis carried out using HPLC analysis. This research supports and promotes the extract's traditional use, suggesting its use as a phytomedicine against depression and anxiety, and calls for further research to clarify its mode of action.

| S-EPMC8399924 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data