Cobalt blue light unit filter - A smartphone attachment for blue light photography.
Ontology highlight
ABSTRACT: Purpose
The aim of this study was to carry out blue light photography of fluorescein-stained corneas using a novel smartphone attachment.Methods
A smartphone attachment known as the cobalt blue light unit (C-BLU) was developed. It can filter out all wavelengths of light except the blue light emerging from the flashlight of a smartphone. A pilot study was carried out wherein the images captured with the C-BLU system were compared with slit-lamp photographs of the same patients. This setup was then used to photo document fluorescein-stained corneas in various clinical settings assembled at point-of-care.Results
Many pathologies of the fluorescein-stained cornea were captured using the C-BLU filter. It was used effectively in various settings (remote eye camps, intensive care units (ICU), pediatric group, corneal trauma triaging, etc.). C-BLU was assembled and used by optometrists and ophthalmology residents. The images captured were used for documenting, assisting in the treatment, and also for telecommunication of the patients' findings.Conclusion
C-BLU is a low-cost pocket-size filter which is easy to use with a modern smartphone without any technical expertise needed to obtain a clear image of fluorescein-stained pathological corneas.
SUBMITTER: Puthalath AS
PROVIDER: S-EPMC8597460 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Hemispherical photography (HP), implemented with cameras equipped with "fisheye" lenses, is a widely used method for describing forest canopies and light regimes. A promising technological advance is the availability of low-cost fisheye lenses for smartphone cameras. However, smartphone camera sensors cannot record a full hemisphere. We investigate whether smartphone HP is a cheaper and faster but still adequate operational alternative to traditional cameras for describing forest canopies and light regimes. We collected hemispherical pictures with both smartphone and traditional cameras in 223 forest sample points, across different overstory species and canopy densities. The smartphone image acquisition followed a faster and simpler protocol than that for the traditional camera. We automatically thresholded all images. We processed the traditional camera images for Canopy Openness (CO) and Site Factor estimation. For smartphone images, we took two pictures with different orientations per point and used two processing protocols: (i) we estimated and averaged total canopy gap from the two single pictures, and (ii) merging the two pictures together, we formed images closer to full hemispheres and estimated from them CO and Site Factors. We compared the same parameters obtained from different cameras and estimated generalized linear mixed models (GLMMs) between them. Total canopy gap estimated from the first processing protocol for smartphone pictures was on average significantly higher than CO estimated from traditional camera images, although with a consistent bias. Canopy Openness and Site Factors estimated from merged smartphone pictures of the second processing protocol were on average significantly higher than those from traditional cameras images, although with relatively little absolute differences and scatter. Smartphone HP is an acceptable alternative to HP using traditional cameras, providing similar results with a faster and cheaper methodology. Smartphone outputs can be directly used as they are for ecological studies, or converted with specific models for a better comparison to traditional cameras.
| S-EPMC5743530 | biostudies-literature
Project description:Conjunctival examination for trachomatous inflammation-follicular (TF) guides public health decisions for trachoma. Smartphone cameras may allow remote conjunctival grading, but previous studies have found low sensitivity. A random sample of 412 children aged 1-9 years received an in-person conjunctival examination and then had conjunctival photographs taken with 1) a single-lens reflex (SLR) camera and 2) a smartphone coupled to a 3D-printed magnifying attachment. Three masked graders assessed the conjunctival photographs for TF. Latent class analysis was used to determine the sensitivity and specificity of each grading method for TF. Single-lens reflex photo-grading was 95.0% sensitive and 93.6% specific, and smartphone photo-grading was 84.1% sensitive and 97.6% specific. The sensitivity of the smartphone-CellScope device was considerably higher than that of a previous study using the native smartphone camera, without attachment. Magnification of smartphone images with a simple attachment improved the grading sensitivity while maintaining high specificity in a region with hyperendemic trachoma.
| S-EPMC7695070 | biostudies-literature
Project description:One of the main goals of shotgun proteomics studies is to identify by mass spectrometry as many proteins as possible, often from low-protein samples, in order to help answer important biological questions. All experimental steps need to be optimized to achieve a thorough proteomic analysis. One of the most important is an optimal extraction and solubilization of proteins through the use of detergents, chaotropes, and reducing agents. Although very efficient in solubilizing membrane proteins, the presence of these detergents, such as SDS, negatively affects the LC/MS analysis and limits protein identifications, and therefor they need to be removed before LC-MS analysis. Filter-aided sample preparation (FASP) is a generally accepted method for removal of detergents and chaotropes used for protein extraction as well as non-proteinaceous compounds such as salts, nucleic acids and lipids. Another critical aspect of proteomic analyses is the starting amount of protein in the sample. There is still little information about the efficacy of FASP method for protein-limited samples. The aim of this study was to compare two methods for SDS removal, ethanol precipitation versus FASP and we evaluate the effectiveness of FASP method using different filtration devices, as well as RIPA (0.1% SDS) and high-SDS (2%SDS) lysis buffers applied to low (1µg) and high (10-100µg) protein amounts.
2020-11-05 | PXD003400 | Pride
Project description: Not available
| S-EPMC7780497 | biostudies-literature
Project description:The objective of this study was to develop a low-cost method for rice growth information obtained quickly using digital images taken with smartphone. A new canopy parameter, namely, the canopy volume parameter (CVP), was proposed and developed for rice using the leaf area index (LAI) and plant height (PH). Among these parameters, the CVP was selected as an optimal parameter to characterize rice yields during the growth period. Rice canopy images were acquired with a smartphone. Image feature parameters were extracted, including the canopy cover (CC) and numerous vegetation indices (VIs), before and after image segmentation. A rice CVP prediction model in which the CC and VIs served as independent variables was established using a random forest (RF) regression algorithm. The results revealed the following. The CVP was better than the LAI and PH for predicting the final yield. And a CVP prediction model constructed according to a local modelling method for distinguishing different types of rice varieties was the most accurate (coefficient of determination (R2) = 0.92; root mean square error (RMSE) = 0.44). These findings indicate that digital images can be used to track the growth of crops over time and provide technical support for estimating rice yields.
| S-EPMC7412381 | biostudies-literature
Project description:A tuberization inhibitor has long been postulated, but not yet found. We found that blue light inhibits tuberization in Norland, a day-neutral variety of Solanum tuberosum L. Tissue-cultured plants formed tubers within 8 weeks under continuous darkness, and white, red, or far-red light. Preliminary experiments indicated that a one- or two-day exposure to blue light after 3-4 weeks of dark treatment will inhibit tuber formation in ‘Norland’ plants. Using this system and expression profiling, we may be able to identify candidate tuberization inhibitors. 'Norland' plants (subcultured from existing cultures and grown for two weeks under continuous 100 umol/m2-s white fluorescent light) were placed in tuber-inducing media containing 6% sucrose, vitamins, MS salts, and kinetin (2.5 mg/L). Tubes containing plants were wrapped in two layers of aluminum foil. After 3 weeks and 2 days, half of the tubes were exposed to 6-7 umol/m2-s blue light. The other half of the tubes were left in darkness (controls). After 2 days, all plants were harvested and frozen in liquid nitrogen. Plants exposed to blue light were harvested under blue light. Control plants were harvested under < 2 umol/m2-s light conditions. All plant transfers were done at 1700 (5 PM) to avoid possible complications due to circadian effects. Experiments were performed four times, from subculture to harvest. RNA was extracted from stem and leaf tissue of plants using the Qiagen RNeasy Plant Mini kit. Extracted RNA was then converted to dsDNA using the Invitrogen protocol and reagents for double stranded cDNA synthesis. The resulting dsDNA was in vitro transcribed into amplified RNA using the Ambion procedure and reagents for in vitro transcription. cDNA was purified using Qiagen MinElute columns and protocol. Amplified RNA was purified using Ambion columns or Qiagen RNeasy columns and the Ambion protocol, and quantified using RiboGreen dye fluorometry. Keywords: Direct comparison
2008-02-13 | GSE10491 | GEO
Project description:PurposeTo assess the subjective quality of anterior segment photos taken from a smartphone camera adapted to the slit lamp compared to a commercial inbuilt slit-lamp camera.MethodsNon-inferiority study. Five paired images of the anterior segment of normal eyes were taken using an iPhone 11 (Apple, Inc., Calif., USA) camera attached to a universal slit-lamp adaptor and a commercial inbuilt slit-lamp camera (Haag-Streit Diagnostics, Bern, Switzerland). Images were collated into a survey in which ophthalmology students, residents, registrars, and consultants participated to select the image taken from the inbuilt slit-lamp camera. If the image quality was subjectively indistinguishable, we expected a 50:50 split for each photograph that was presented. We selected a 10% non-inferiority margin, with the hypothesis that no less than 40% of images believed to be from the conventional camera were in fact from the smartphone camera.ResultsThere were 27 respondents in the survey: ophthalmology consultants (n = 7), registrars (n = 10), residents (n = 7), intern (n = 1) and students (n = 2). The mean correct identification across the respondents was 11.3 out of 25 (45.2%) images. Overall, the smartphone camera was non-inferior to the inbuilt slit-lamp camera (p < 0.001). The non-inferiority of the smartphone camera was significant for consultants (47.4%, p < 0.01), registrars (47.6%, p < 0.001) and residents (37.7%, p < 0.0001).ConclusionsAnterior segment images obtained with a smartphone camera were non-inferior to the commercial inbuilt slit-lamp camera. Smartphone cameras may be a non-inferior tool for communication of anterior segment images having implications for the ease of access to quality telehealth consultations.
| S-EPMC9411845 | biostudies-literature
Project description:PurposeAn important, unmet clinical need is for cost-effective, reliable, easy-to-use, and portable retinal photography to evaluate preventable causes of vision loss in children. This study presents the feasibility of a novel smartphone-based retinal imaging device tailored to imaging the pediatric fundus.MethodsSeveral modifications for children were made to our previous device, including a child-friendly 3D printed housing of animals, attention-grabbing targets, enhanced image stitching, and video-recording capabilities. Retinal photographs were obtained in children undergoing routine dilated eye examination. Experienced masked retina-specialist graders determined photograph quality and made diagnoses based on the images, which were compared to the treating clinician's diagnosis.ResultsDilated fundus photographs were acquired in 43 patients with a mean age of 6.7 years. The diagnoses included retinoblastoma, Coats' disease, commotio retinae, and optic nerve hypoplasia, among others. Mean time to acquire five standard photographs totaling 90-degree field of vision was 2.3 ± 1.1 minutes. Patients rated their experience of image acquisition favorably, with a Likert score of 4.6 ± 0.8 out of 5. There was 96% agreement between image-based diagnosis and the treating clinician's diagnosis.ConclusionsWe report a handheld smartphone-based device with modifications tailored for wide-field fundus photography in pediatric patients that can rapidly acquire fundus photos while being well-tolerated.Translational relevanceAdvances in handheld smartphone-based fundus photography devices decrease the technical barrier for image acquisition in children and may potentially increase access to ophthalmic care in communities with limited resources.
| S-EPMC6543857 | biostudies-literature
Project description:Inspired by natural living systems, modern cameras can attain three-dimensional vision via multi-view geometry like compound eyes in flies, or time-of-flight sensing like echolocation in bats. However, high-speed, accurate three-dimensional sensing capable of scaling over an extensive distance range and coping well with severe occlusions remains challenging. Here, we report compact light field photography for acquiring large-scale light fields with simple optics and a small number of sensors in arbitrary formats ranging from two-dimensional area to single-point detectors, culminating in a dense multi-view measurement with orders of magnitude lower dataload. We demonstrated compact light field photography for efficient multi-view acquisition of time-of-flight signals to enable snapshot three-dimensional imaging with an extended depth range and through severe scene occlusions. Moreover, we show how compact light field photography can exploit curved and disconnected surfaces for real-time non-line-of-sight 3D vision. Compact light field photography will broadly benefit high-speed 3D imaging and open up new avenues in various disciplines.
| S-EPMC9184585 | biostudies-literature
Project description:A single beam one-step holographic interferometry method was developed to fabricate porous polymer structures with controllable pore size and location to produce compact graded photonic bandgap structures for linear variable optical filters. This technology is based on holographic polymer dispersed liquid crystal materials. By introducing a forced internal reflection, the optical reflection throughout the visible spectral region, from blue to red, is high and uniform. In addition, the control of the bandwidth of the reflection resonance, related to the light intensity and spatial porosity distributions, was investigated to optimize the optical performance. The development of portable and inexpensive personal health-care and environmental multispectral sensing/imaging devices will be possible using these filters.
| S-EPMC3985781 | biostudies-literature