Luminescent Lead Halide Ionic Liquids for High-Spatial-Resolution Fast Neutron Imaging
Ontology highlight
ABSTRACT:
SUBMITTER: Morad V
PROVIDER: S-EPMC8603383 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Postsynthetic chemical transformations of colloidal nanocrystals, such as ion-exchange reactions, provide an avenue to compositional fine-tuning or to otherwise inaccessible materials and morphologies. While cation-exchange is facile and commonplace, anion-exchange reactions have not received substantial deployment. Here we report fast, low-temperature, deliberately partial, or complete anion-exchange in highly luminescent semiconductor nanocrystals of cesium lead halide perovskites (CsPbX3, X = Cl, Br, I). By adjusting the halide ratios in the colloidal nanocrystal solution, the bright photoluminescence can be tuned over the entire visible spectral region (410-700 nm) while maintaining high quantum yields of 20-80% and narrow emission line widths of 10-40 nm (from blue to red). Furthermore, fast internanocrystal anion-exchange is demonstrated, leading to uniform CsPb(Cl/Br)3 or CsPb(Br/I)3 compositions simply by mixing CsPbCl3, CsPbBr3, and CsPbI3 nanocrystals in appropriate ratios.
| S-EPMC4538456 | biostudies-literature
Project description:Lead halide perovskites have exhibited excellent performance in solar cells, LEDs and detectors. Thermal properties of perovskites, such as heat capacity and thermal conductivity, have rarely been studied and corresponding devices have barely been explored. Considering the high absorption coefficient (104~105 cm-1), low specific heat capacity (296-326 J kg-1 K-1) and small thermal diffusion coefficient (0.145 mm2 s-1), herein we showcase the successful use of perovskite in optoacoustic transducers. The theoretically calculated phonon spectrum shows that the overlap of optical phonons and acoustic phonons leads to the up-conversion of acoustic phonons, and thus results in experimentally measured low thermal diffusion coefficient. The assembled device of PDMS/MAPbI3/PDMS simultaneously achieves broad bandwidths (-6 dB bandwidth: 40.8 MHz; central frequency: 29.2 MHz), and high conversion efficiency (2.97 × 10-2), while all these parameters are the record values for optoacoustic transducers. We also fabricate miniatured devices by assembling perovskite film onto fibers, and clearly resolve the fine structure of fisheyes, which demonstrates the strong competitiveness of perovskite based optoacoustic transducers for ultrasound imaging.
| S-EPMC8184828 | biostudies-literature
Project description:Polymeric ionic liquids (PILs) are an interesting class of polyelectrolytes, merging peculiar physical-chemical features of ionic liquids with the flexibility, mechanical stability and processability typical of polymers. The combination of PILs with colloidal semiconducting nanocrystals leads to novel nanocomposite materials with high potential for batteries and solar cells. We report the synthesis and properties of a hybrid nanocomposite made of colloidal luminescent CdSe nanocrystals incorporated in a novel ex situ synthesized imidazolium-based PIL, namely, either a poly(N-vinyl-3-butylimidazolium hexafluorophosphate) or a homologous PIL functionalized with a thiol end-group exhibiting a chemical affinity with the nanocrystal surface. A capping exchange procedure has been implemented for replacing the pristine organic capping molecules of the colloidal CdSe nanocrystals with inorganic chalcogenide ions, aiming to disperse the nano-objects in the PILs, by using a common polar solvent. The as-prepared nanocomposites have been studied by TEM investigation, UV-Vis, steady-state and time resolved photoluminescence spectroscopy for elucidating the effects of the PIL functionalization on the morphological and optical properties of the nanocomposites.
| S-EPMC5453139 | biostudies-other
Project description:Ionic Liquids are a broad group of salts with low melting points that can be specifically tuned for a broad range of applications. Despite being initially considered “green” solvents, their better environmental friendliness compared to traditional solvents has been increasingly challenged. In this study, we aimed to investigate the molecular effects of ILs exposure by using RNA-sequencing to study differential gene expression patterns. Thus, we exposed Daphnia magna to 1-ethyl-3-methylimidazolium chloride ([C2mim]Cl), 1-dodecyl chloride-3-methylimidazolium ([C12mim]Cl) and cholinium chloride ([Chol]Cl). Results suggest that the three ILs share several mechanisms of toxicity, including cellular membrane and cytoskeleton damage, oxidative stress, inhibition of antioxidant enzymes, mitochondrial affectation, changes in protein biosynthesis and energy production, DNA damage, and ultimately, programmed cell death and disease initiation. Overall, the dataset revealed that [C2mim]Cl and [C12mim]Cl were, respectively, the least and the most toxic ILs at the transcriptional level. Also, it is reinforced that [Chol]Cl is not devoid of environmental hazardous potential. Unique gene expression signatures could also be identified for each IL.
2021-08-13 | GSE156769 | GEO
Project description:CdTe nanoparticles capped with a cationic thiolate ligand were stably dispersed in ionic liquids, 1-alkyl-1-methyl-pyrrolidinium bis(trifluoromethanesulfonyl)amides with an alkyl group of n-propyl, butyl and octyl-chain, and in an ionic plastic crystal, 1-ethyl-1-methylpyrrolidinium bis(trifluoromethanesulfonyl)amide. Dispersion behavior of CdTe nanoparticles in these ionic media was evaluated, in which the solvation of nanoparticles by the ionic components was particularly interested. The ionic media showed alkyl-chain length-dependent solvation behavior, which was suggested by the thermal analysis of nanocomposites. The longer alkyl-chains led to the greater decrease in the thermal melting enthalpy of ionic media with the introduction of nanoparticles. The ionic liquid with an octyl-chain, which is considered to form a thicker solvation layer, afforded better emission durability of CdTe nanoparticles compared to the ionic liquid with a shorter alkyl chain.
| S-EPMC7144199 | biostudies-literature
Project description:Lead halide perovskites of APbX3 type [A = Cs, formamidinium (FA), methylammonium; X = Br, I] in the form of ligand-capped colloidal nanocrystals (NCs) are widely studied as versatile photonic sources. FAPbBr3 and CsPbBr3 NCs have become promising as spectrally narrow green primary emitters in backlighting of liquid-crystal displays (peak at 520-530 nm, full width at half-maximum of 22-30 nm). Herein, we report that wet ball milling of bulk APbBr3 (A = Cs, FA) mixed with solvents and capping ligands yields green luminescent colloidal NCs with a high overall reaction yield and optoelectronic quality on par with that of NCs of the same composition obtained by hot-injection method. We emphasize the superiority of oleylammonium bromide as a capping ligand used for this procedure over the standard oleic acid and oleylamine. We also show a mechanically induced anion-exchange reaction for the formation of orange-emissive CsPb(Br/I)3 NCs.
| S-EPMC5999230 | biostudies-literature
Project description:Highly specialized cells are fundamental for proper functioning of complex organs. Variations in cell-type specific gene expression and protein composition have been linked to a variety of diseases. Although single cell technologies have emerged as valuable tools to address this cellular heterogeneity, a majority of these workflows lack sufficient in situ resolution for functional classification of cells and are associated with extremely long analysis time, especially when it comes to in situ proteomics. In addition, lack of understanding of single cell dynamics within their native environment limits our ability to explore the altered physiology in disease development. This limitation is particularly relevant in the mammalian brain, where different cell types perform unique functions and exhibit varying sensitivities to insults. The hippocampus, a brain region crucial for learning and memory, is of particular interest due to its obvious involvement in various neurological disorders. Here, we present a combination of experimental and data integration approaches for investigation of cellular heterogeneity and functional disposition within the mouse brain hippocampus using MALDI Imaging mass spectrometry (MALDI-IMS) and shotgun proteomics (LC-MS/MS) coupled with laser-capture microdissection (LCM) along with spatial transcriptomics. Within the dentate gyrus granule cells we identified two proteomically distinct cellular subpopulations that are characterized by a substantial number of discriminative proteins. These cellular clusters contribute to the overall functionality of the dentate gyrus by regulating redox homeostasis, mitochondrial organization, RNA processing, and microtubule organization. Importantly, most of the identified proteins matched their transcripts, verifying the in situ protein identification and supporting their functional analyses. By combining high-throughput spatial proteomics with transcriptomics, our approach enables reliable near-single-cell scale identification of proteins and profiling of inter-cellular heterogeneity within similar cell-types in tissues. This methodology has the potential to be applied to different biological conditions and tissues, providing a deeper understanding of cellular subpopulations in situ.
2024-07-24 | GSE242688 | GEO
Project description:Ionic liquids and poly(ionic liquid)s have been successfully converted into nitrogen-doped porous carbons with tunable surface area up to 1200 m²/g at high temperatures in air. Compared to conventional carbonization process conducted under inert gas to produce nitrogen-doped carbons, the new production method was completed in a rather shorter time without noble gas protection.
| S-EPMC4848988 | biostudies-literature
Project description:Interest in fast and easy detection of high-energy radiation (x-, γ-rays and neutrons) is closely related to numerous practical applications ranging from biomedicine and industry to homeland security issues. In this regard, crystals of hybrid halide perovskite have proven to be excellent detectors of x- and γ-rays, offering exceptionally high sensitivities in parallel to the ease of design and handling. Here, we demonstrate that by assembling a methylammonium lead tri-bromide perovskite single crystal (CH3NH3PbBr3 SC) with a Gadolinium (Gd) foil, one can very efficiently detect a flux of thermal neutrons. The neutrons absorbed by the Gd foil turn into γ-rays, which photo-generate charge carriers in the CH3NH3PbBr3 SC. The induced photo-carriers contribute to the electric current, which can easily be measured, providing information on the radiation intensity of thermal neutrons. The dependence on the beam size, bias voltage and the converting distance is investigated. To ensure stable and efficient charge extraction, the perovskite SCs were equipped with carbon electrodes. Furthermore, other types of conversion layers were also tested, including borated polyethylene sheets as well as Gd grains and Gd2O3 pellets directly engulfed into the SCs. Monte Carlo N-Particle (MCNP) radiation transport code calculations quantitatively confirmed the detection mechanism herein proposed.
| S-EPMC8405692 | biostudies-literature
Project description:Colloidal lead halide perovskite nanocrystals (NCs) have recently emerged as a novel class of bright emitters with pure colors spanning the entire visible spectral range. Contrary to conventional quantum dots, such as CdSe and InP NCs, perovskite NCs feature unusual, defect-tolerant photophysics. Specifically, surface dangling bonds and intrinsic point defects such as vacancies do not form midgap states, known to trap carriers and thereby quench photoluminescence (PL). Accordingly, perovskite NCs need not be electronically surface-passivated (with, for instance, ligands and wider-gap materials) and do not noticeably suffer from photo-oxidation. Novel opportunities for their preparation therefore can be envisaged. Herein, we show that the infiltration of perovskite precursor solutions into the pores of mesoporous silica, followed by drying, leads to the template-assisted formation of perovskite NCs. The most striking outcome of this simple methodology is very bright PL with quantum efficiencies exceeding 50%. This facile strategy can be applied to a large variety of perovskite compounds, hybrid and fully inorganic, with the general formula APbX3, where A is cesium (Cs), methylammonium (MA), or formamidinium (FA), and X is Cl, Br, I or a mixture thereof. The luminescent properties of the resulting templated NCs can be tuned by both quantum size effects as well as composition. Also exhibiting intrinsic haze due to scattering within the composite, such materials may find applications as replacements for conventional phosphors in liquid-crystal television display technologies and in related luminescence down-conversion-based devices.
| S-EPMC5799875 | biostudies-literature