Browse
Submit Data
Databases
API
Help

Dataset Information

12 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Towards High Throughput Structuring of Liquid Foams in Microchannels: Effect of Geometry, Flowrate and Formulation.

ABSTRACT: This work is part of a study aiming to design a high-throughput foaming microsystem. The main focused field of application is the food industry. With the objective of improving the design of the microdevice, the effects of the geometry and the nature of the liquid base are presently investigated through visualizations of the flow typology of bubbles trains, aiming to expand the knowledge on key parameters that lead to an improved gas breakup. The tested set of conditions is not encountered in traditional microfluidics systems: i.e., throughputs up to 19 L·h^-1 for the liquid phase, process velocities around 20 m·s^-1 and flow of complex fluids. The behavior of solutions based on xanthan gum (XG) and whey proteins (WPI) is compared to that of solutions containing one of these ingredients or other ones (caseinates, glycerol). The structural and end-used properties of the final foams, namely the bubble diameter and rheological behavior, are evaluated. The incorporation of XG induces bubble shape stabilization even at the highest shear rates (~10⁵ s^-1) encountered in the mixing channel. "Controlled" interfacial breakup by tip-streaming or binary breakup are only observed with the WPI/XG biopolymers. This study indubitably highlights the essential role of the process/formulation interaction in the development of structural and functional properties of food foams when using microfluidics at high throughput.

SUBMITTER: Sepulveda J

PROVIDER: S-EPMC8617920 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

High-Throughput Particle Concentration Using Complex Cross-Section Microchannels.

Project description:High throughput particle/cell concentration is crucial for a wide variety of biomedical, clinical, and environmental applications. In this work, we have proposed a passive spiral microfluidic concentrator with a complex cross-sectional shape, i.e., a combination of rectangle and trapezoid, for high separation efficiency and a confinement ratio less than 0.07. Particle focusing in our microfluidic system was observed in a single, tight focusing line, in which higher particle concentration is possible, as compared with simple rectangular or trapezoidal cross-sections with similar flow area. The sharper focusing stems from the confinement of Dean vortices in the trapezoidal region of the complex cross-section. To quantify this effect, we introduce a new parameter, complex focusing number or CFN, which is indicative of the enhancement of inertial focusing of particles in these channels. Three spiral microchannels with various widths of 400 µm, 500 µm, and 600 µm, with the corresponding CFNs of 4.3, 4.5, and 6, respectively, were used. The device with the total width of 600 µm was shown to have a separation efficiency of ~98%, and by recirculating, the output concentration of the sample was 500 times higher than the initial input. Finally, the investigation of results showed that the magnitude of CFN relies entirely on the microchannel geometry, and it is independent of the overall width of the channel cross-section. We envision that this concept of particle focusing through complex cross-sections will prove useful in paving the way towards more efficient inertial microfluidic devices.

| S-EPMC7231362 | biostudies-literature

High throughput viscoelastic particle focusing and separation in spiral microchannels.

Project description:Passive particle manipulation using inertial and elasto-inertial microfluidics have received substantial interest in recent years and have found various applications in high throughput particle sorting and separation. For separation applications, elasto-inertial microfluidics has thus far been applied at substantial lower flow rates as compared to inertial microfluidics. In this work, we explore viscoelastic particle focusing and separation in spiral channels at two orders of magnitude higher Reynolds numbers than previously reported. We show that the balance between dominant inertial lift force, dean drag force and elastic force enables stable 3D particle focusing at dynamically high Reynolds numbers. Using a two-turn spiral, we show that particles, initially pinched towards the inner wall using an elasticity enhancer, PEO (polyethylene oxide), as sheath migrate towards the outer wall strictly based on size and can be effectively separated with high precision. As a proof of principle for high resolution particle separation, 15 µm particles were effectively separated from 10 µm particles. A separation efficiency of 98% for the 10 µm and 97% for the 15 µm particles was achieved. Furthermore, we demonstrate sheath-less, high throughput, separation using a novel integrated two-spiral device and achieved a separation efficiency of 89% for the 10 µm and 99% for the 15 µm particles at a sample flow rate of 1 mL/min-a throughput previously only reported for inertial microfluidics. We anticipate the ability to precisely control particles in 3D at extremely high flow rates will open up several applications, including the development of ultra-high throughput microflow cytometers and high-resolution separation of rare cells for point of care diagnostics.

| S-EPMC8055915 | biostudies-literature

Inertio-elastic focusing of bioparticles in microchannels at high throughput.

Project description:Controlled manipulation of particles from very large volumes of fluid at high throughput is critical for many biomedical, environmental and industrial applications. One promising approach is to use microfluidic technologies that rely on fluid inertia or elasticity to drive lateral migration of particles to stable equilibrium positions in a microchannel. Here, we report on a hydrodynamic approach that enables deterministic focusing of beads, mammalian cells and anisotropic hydrogel particles in a microchannel at extremely high flow rates. We show that on addition of micromolar concentrations of hyaluronic acid, the resulting fluid viscoelasticity can be used to control the focal position of particles at Reynolds numbers up to Re≈10,000 with corresponding flow rates and particle velocities up to 50 ml min(-1) and 130 m s(-1). This study explores a previously unattained regime of inertio-elastic fluid flow and demonstrates bioparticle focusing at flow rates that are the highest yet achieved.

| S-EPMC4476514 | biostudies-literature

High-Throughput Liquid-Liquid Extractions with Nanoliter Volumes.

Project description:Current methods for liquid-liquid extractions generally require microliter to milliliter volumes of solvents and sample, long equilibration times, and manual procedures. Extraction methods for samples in microfluidic systems have been limited as this tool is difficult to implement on the nanoliter or smaller scale. We have developed slug-flow nanoextraction (SFNE), a method based on droplet microfluidics that allows multiple liquid-liquid extractions to be performed simultaneously in a capillary tube, using only 5 nL of sample and extraction solvent per extraction. Each two-phase slug is segmented from the others by immiscible carrier fluid. We found rapid extractions (<5 s), partition coefficients matching those achieved at larger scale extractions, and potential to preconcentrate samples through volume manipulation. This method was used to accurately and rapidly determine octanol-water partition coefficients (Kow), determining identical Kow as the shake-flask method for acetaminophen, Kow = 2.48 ± 0.02. The measurement, along with calibration and 12 replicates, was complete within 5 min, consuming under 150 nL of solvent and sample. The method was also applied to extract analytes from complex biological samples prior to electrospray ionization-tandem mass spectrometry (ESI-MS/MS) at a rate of 6 s per sample, allowing for simultaneous determination of five different drugs spiked into human plasma, synthetic urine (SU), and artificial cerebral spinal fluid (aCSF) using ethyl acetate as the extraction phase. The signal-to-noise (S/N) for analytes improved up to 19-fold compared to direct ESI-MS of single-phase droplets (aqueous plugs segmented by carrier fluid), with limits of detection down to 7 nM (35 amol).

| S-EPMC7814290 | biostudies-literature

Chiral Liquid Crystal Lenses Confined in Microchannels.

Project description:It is known that the liquid crystalline smectic-A phase has geometric defects, called focal conic domains, which can be used as gradient-index microlenses. Cholesteric (chiral nematic) phases also have topological defects with a central symmetry and a singularity at their center. We explore a weakly chiral system in which both types of defects can be present in the same material at different temperatures, and with this strategy we create lenses whose focal length is tunable with temperature. We measure the focal length of the tunable lenses, and we investigate the behavior of the defects near the phase transition. We identify the experimental conditions that make the simultaneous presence of the smectic focal conic domains and the circular cholesteric domains possible, such as the concentration of chiral dopant and the rate of heating and cooling. The transformation of focal conic domains into circular cholesteric domains is a new example of memory at the phase transition between smectic-A and nematic liquid crystals.

| S-EPMC7503803 | biostudies-literature

Electrocapillary Actuation of Liquid Metal in Microchannels.

Project description:Controllable deformation of liquid metal by electrocapillary actuation (ECA) is empirically characterized in fluidic channels at the sub-millimeter-length scale. In 100-µm-deep channels of varying widths, the Galinstan liquid metal could move at velocities of more than 40 mm/s. The liquid metal could extend more than 2.5 mm into the channels at an electrocapillary actuation voltage of 3 V DC. The dynamic behavior of the liquid metal as it moves in the microchannels is described. These results are useful for designing microsystems that use liquid metal as a functional material.

| S-EPMC9032191 | biostudies-literature

Droplet Formation by Confined Liquid Threads inside Microchannels.

Project description:A confined liquid thread can form monodisperse droplets near the exit of a microchannel, provided the continuous phase is able to enter the microchannel. A general model that accurately predicts the droplet size including the breakup position inside the microchannel is presented and is verified with experimental observations; breakup occurs as long as the capillary number (Ca) of the liquid thread is below a critical capillary number (Cacr); for cylindrical microchannels, it is derived that Cacr = 1/16. Below Cacr, the formed droplets at the exit of the microchannel have a diameter approximately two times the diameter of the liquid thread; around and above Cacr, the liquid thread remains stable and the formed droplets grow infinitely large. The presented controlled droplet generation method is a useful tool for producing monodisperse emulsions and has great potential for the food and pharmaceutical industry.

| S-EPMC5618148 | biostudies-literature

Sheath-less high throughput inertial separation of small microparticles in spiral microchannels with trapezoidal cross-section.

Project description:Various mechanisms of different designs have emerged for the purpose of microparticle separation and cell sorting. The main goals behind such designs are to create high throughput and high purity sample isolation. In this study, high efficiency, high throughput and precise separation of microparticles under inertial lift and drag forces induced by trapezoidal curvilinear channels are reported. This work is the first to focus and recover 2 from 5 μm and 2 from 10 μm particles in spiral channels in a sheath-less flow device, which reduces the overall complexity of the system and allows for higher throughput. The new microfluidic chip design is fabricated in glass using femtosecond laser ablation. In addition, mathematical force calculations were conducted during the design phase of the microfluidic channels and compared with experiments. The results show a close prediction of the equilibrium position of the tested microparticles.

| S-EPMC9076541 | biostudies-literature

Optimized holographic femtosecond laser patterning method towards rapid integration of high-quality functional devices in microchannels.

Project description:Rapid integration of high-quality functional devices in microchannels is in highly demand for miniature lab-on-a-chip applications. This paper demonstrates the embellishment of existing microfluidic devices with integrated micropatterns via femtosecond laser MRAF-based holographic patterning (MHP) microfabrication, which proves two-photon polymerization (TPP) based on spatial light modulator (SLM) to be a rapid and powerful technology for chip functionalization. Optimized mixed region amplitude freedom (MRAF) algorithm has been used to generate high-quality shaped focus field. Base on the optimized parameters, a single-exposure approach is developed to fabricate 200 × 200 μm microstructure arrays in less than 240 ms. Moreover, microtraps, QR code and letters are integrated into a microdevice by the advanced method for particles capture and device identification. These results indicate that such a holographic laser embellishment of microfluidic devices is simple, flexible and easy to access, which has great potential in lab-on-a-chip applications of biological culture, chemical analyses and optofluidic devices.

| S-EPMC5020409 | biostudies-literature

Effect of liquid cooling on PCR performance with the parametric study of cross-section shapes of microchannels.

Project description:In recent years, PCR-based methods as a rapid and high accurate technique in the industry and medical fields have been expanded rapidly. Where we are faced with the COVID-19 pandemic, the necessity of a rapid diagnosis has felt more than ever. In the current interdisciplinary study, we have proposed, developed, and characterized a state-of-the-art liquid cooling design to accelerate the PCR procedure. A numerical simulation approach is utilized to evaluate 15 different cross-sections of the microchannel heat sink and select the best shape to achieve this goal. Also, crucial heat sink parameters are characterized, e.g., heat transfer coefficient, pressure drop, performance evaluation criteria, and fluid flow. The achieved result showed that the circular cross-section is the most efficient shape for the microchannel heat sink, which has a maximum heat transfer enhancement of 25% compared to the square shape at the Reynolds number of 1150. In the next phase of the study, the circular cross-section microchannel is located below the PCR device to evaluate the cooling rate of the PCR. Also, the results demonstrate that it takes 16.5 s to cool saliva samples in the PCR well, which saves up to 157.5 s for the whole amplification procedure compared to the conventional air fans. Another advantage of using the microchannel heat sink is that it takes up a little space compared to other common cooling methods.

| S-EPMC8352922 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data