Browse
Submit Data
Databases
API
Help

Dataset Information

22 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Exploration of Copper Oxide Nanoneedle Electrosynthesis Applied in the Degradation of Methylene Blue.

ABSTRACT: In this study, we report a low cost, fast and unexplored electrochemical synthesis strategy of copper oxide nanoneedles films as well as their morphological and chemical characterization. The nanostructured films were prepared using electrochemical anodization in alkaline electrolyte solutions of ethylene glycol, water and fluoride ions. The film morphology shows nanoneedle-shaped structures, with lengths up to 1-2 μm; meanwhile, high-resolution X-ray photoelectron spectroscopy (HRXPS) and spectroscopy Raman analyses indicate that a mixture of Cu(II) and Cu(I) oxides, or only Cu(I) oxide, is obtained as the percentage of water in the electrolyte solution decreases. A preliminary study was also carried out for the photocatalytic degradation of the methylene blue (MB) dye under irradiation with simulated sunlight in the presence of the nanoneedles obtained, presenting a maximum degradation value of 88% of MB and, thus, demonstrating the potential characteristics of the material investigated in the degradation of organic dyes.

SUBMITTER: Oyarzun DP

PROVIDER: S-EPMC8621926 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Synthesis of Kaolin-Supported Nickel Oxide Composites for the Catalytic Oxidative Degradation of Methylene Blue Dye

Project description: Not available

| S-EPMC10832009 | biostudies-literature

Enhancing the Photocatalytic Degradation of Methylene Blue with Graphene Oxide-Encapsulated g-C3N4/ZnO Ternary Composites

Project description: Not available

| S-EPMC11007858 | biostudies-literature

Photocatalytic degradation of methylene blue with spent FCC catalyst loaded with ferric oxide and titanium dioxide.

Project description:The spent fluid catalytic cracking (FCC) catalyst has been loaded with ferric oxide (Fe2O3) and titanium dioxide (TiO2). Fe-Ti/SF composite (loaded with 5 wt% TiO2 and 5 wt% Fe2O3), Fe/SF composite (loaded with10 wt% Fe2O3) and Ti/SF composite (loaded with 10 wt% TiO2) have been fabricated via a modified-impregnation method. The band gaps of the Fe-Ti/SF, Fe/SF and Ti/SF composites (evaluated by the energy versus [F(R∞)hv]n) are 2.23, 1.98 and 3.0 eV, respectively. Electrochemical impedance spectroscopy shows that the Fe-Ti/SF has lower electron transfer resistance, it has the small charge transfer resistance and fast charge transfer rate. The interparticle electrons transfer between the Fe2O3 and TiO2, which can improve the separation of the photo-electrons and holes. The holes transfer from valence band of TiO2 to the valence band of Fe2O3, which can provide more active sites around the adsorbed molecules. The methylene blue degradation efficiencies (with the Fe-Ti/SF, Fe/SF and Ti/SF composites) are ~ 94.2%, ~ 22.3% and ~ 54.0% in 120 min, respectively. This work reveals that the spent FCC catalyst as supporter can be loaded with Fe2O3 and TiO2. This composite is highly suitable for degradation of methylene blue, which can provide a potential method to dispose the spent FCC catalyst in industry.

| S-EPMC7391759 | biostudies-literature

Coupling Adsorption-Photocatalytic Degradation of Methylene Blue and Maxilon Red.

Project description:The MB and MR removal process by two mechanisms of adsorption using rice straw (absence of UV light) and photodegradation on TiO2 surfaces was investigated. MB and MR removal efficiency were further intensified upon the sequential operation of adsorption followed by photocatalytic degradation over TiO2 under visible light irradiation. The TiO2 was used to remove methylene blue (MB) and Maxilon Red (MR) dye from aqueous media by continuous mode at 25 ± 2 °C, at pH 6.8 ± 0.2. Photo-illumination study revealed 75.81 and 65.51% MB and MR removal with the dose of 1 g/L TiO2 with an initial concentration of 5 mg/L within 120 min. This study can be deemed of potential applications for the removal of MB and MR dyes on an industrial level using the synergistic adsorption-photocatalytic oxidation approach. A probable photodegradation mechanism was proposed.

| S-EPMC9270313 | biostudies-literature

The Adsorption of Methylene Blue on Eco-Friendly Reduced Graphene Oxide.

Project description:Recently, green-prepared oxidized graphenes have attracted huge interest in water purification and wastewater treatment. Herein, reduced graphene oxide (rGO) was prepared by a scalable and eco-friendly method, and its potential use for the removal of methylene blue (MB) from water systems, was explored. The present work includes the green protocol to produce rGO and respective spectroscopical and morphological characterizations, as well as several kinetics, isotherms, and thermodynamic analyses to successfully demonstrate the adsorption of MB. The pseudo-second-order model was appropriated to describe the adsorption kinetics of MB onto rGO, suggesting an equilibrium time of 30 min. Otherwise, the Langmuir model was more suitable to describe the adsorption isotherms, indicating a maximum adsorption capacity of 121.95 mg g-1 at 298 K. In addition, kinetics and thermodynamic analyses demonstrated that the adsorption of MB onto rGO can be treated as a mixed physisorption-chemisorption process described by H-bonding, electrostatic, and ? - ? interactions. These results show the potential of green-prepared rGO to remove cationic dyes from wastewater systems.

| S-EPMC7221676 | biostudies-literature

Cargo Transportation and Methylene Blue Degradation by Using Fuel-Powered Micromotors.

Project description:In the past two decades, micromotors have experienced rapid development, especially in environmental remediation, the biomedical field, and in cargo delivery. In this study micromotors have been synthesized from a variety of materials. Different functional layers and catalytic layers are formed through template electrodeposition (the bottom-up method). At the same time, the article analyzes the influence of hydrogen peroxide concentration, surfactant type and concentration on the speed of the micromotors. Cargo transportation through tubular micromotors has always been a problem that people are eager to solve. In this article, we electrodeposit a layer of Ni in the microtubes, which effectively guides the microtubular motors to complete the cargo transportation. The potential applications of micromotors are also being explored. We added the prepared micromotors to the methylene blue solution to effectively enhance the degradation.

| S-EPMC8409089 | biostudies-literature

Green Organo-Photooxidative Method for the Degradation of Methylene Blue Dye.

Project description:This study used an organophoto-oxidative material to degrade the toxic azo dye, methylene blue (MB), due to its hazardous effects on aquatic life and humans. MB is traditionally degraded using metal-based catalysts, resulting in high costs. Several organic acids were screened for organo-photooxidative applications against various azo dyes, and ascorbic acid (AA), also known as vitamin C, was found to be best for degradation due to its high photooxidative activity. It is an eco-friendly, edible, and efficient photooxidative material. A photocatalytic box has been developed for the study of organo-photooxidative activity. It was found that when AA was added, degradation efficiency increased from 42 to 95% within 240 min. Different characterization techniques, such as HPLC and GC-MS, were used after degradation for the structural elucidation of degraded products. DFT study was done for the investigation of the mechanistic study behind the degradation process. A statistical tool, RSM, was used for the optimization of parameters (concentration of dye, catalyst, and time). This study develops sustainable and effective solutions for wastewater treatment.

| S-EPMC10938592 | biostudies-literature

Enhanced photocatalytic activity of TiO?-C hybrid aerogels for methylene blue degradation.

Project description:Carbon-based TiO? composites have many advantages as photocatalysts. However, they suffer from low light efficiency due to the low contrast of TiO? with carbon. We synthesized a novel type of anatase-type TiO?-C hybrid aerogel by a one-pot sol-gel method, which shows a photocatalytic activity for methylene degradation up to 4.23 times that of P25, a commercial photocatalyst from Degussa Inc. The hybrid aerogels are prepared from TiCl? and resorcinol-furfural, and have a tunable macropore size from 167 to 996 nm. They are formed of submicrometer particles that consist of interwoven anatase and carbon nanoparticles. The anatase nanoparticles have a size of 8-9 nm and a tunable oxygen vacancy from 7.2 to 18.0%. The extremely high activity is ascribed to the large light absorption caused by macropore scattering and oxygen vacancies in the anatase. These findings may open up a new avenue and stimulate further research to improve photocatalytic performance.

| S-EPMC3804859 | biostudies-literature

Degradation of methylene blue by natural manganese oxides: kinetics and transformation products.

Project description:In this study, natural manganese oxides (MnO x ), an environmental material with high redox potential, were used as a promising low-cost oxidant to degrade the widely used dyestuff methylene blue (MB) in aqueous solution. Although the surface area of MnO x was only 7.17 m2 g-1, it performed well in the degradation of MB with a removal percentage of 85.6% at pH 4. It was found that MB was chemically degraded in a low-pH reaction system and the degradation efficiency correlated negatively with the pH value (4-8) and initial concentration of MB (10-50 mg l-1), but positively with the dosage of MnO x (1-5 g l-1). The degradation of MB fitted well with the second-order kinetics. Mathematical models were also built for the correlation of the kinetic constants with the pH value, the initial concentration of MB and the dosage of MnO x . Furthermore, several transformation products of MB were identified with HPLC-MS, which was linked with the bond energy theory to reveal that the degradation was initiated with demethylation.

| S-EPMC6689640 | biostudies-literature

Theoretical Analysis of Superior Photodegradation of Methylene Blue by Cerium Oxide/Reduced Graphene Oxide vs. Graphene.

Project description:Density functional theory and a semi-empirical quantum chemical approach were used to evaluate the photocatalytic efficiency of ceria (CeO2) combined with reduced graphene oxide (rGO) and graphene (GP) for degrading methylene blue (MB). Two main aspects were examined: the adsorption ability of rGO and GP for MB, and the separation of photogenerated electrons and holes in CeO2/rGO and CeO2/GP. Our results, based on calculations of the adsorption energy, population analysis, bond strength index, and reduced density gradient, show favorable energetics for MB adsorption on both rGO and GP surfaces. The process is driven by weak, non-covalent interactions, with rGO showing better MB adsorption. A detailed analysis involving parameters like fractional occupation density, the centroid distance between molecular orbitals, and the Lewis acid index of the catalysts highlights the effective charge separation in CeO2/rGO compared to CeO2/GP. These findings are crucial for understanding photocatalytic degradation mechanisms of organic dyes and developing efficient photocatalysts.

| S-EPMC11356922 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data