Browse
Submit Data
Databases
API
Help

Dataset Information

20 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Facile Synthesis of Microporous Carbons from Biomass Waste as High Performance Supports for Dehydrogenation of Formic Acid.

ABSTRACT: Formic acid (FA) is found to be a potential candidate for the storage of hydrogen. For dehydrogenation of FA, the supports of our catalysts were acquired by conducting ZnCl₂ treatment and carbonation for biomass waste. The texture and surface properties significantly affected the size and dispersion of Pd and its interaction with the support so as to cause the superior catalytic performance of catalysts. Microporous carbon obtained by carbonization of ZnCl₂ activated peanut shells (C_PS-ZnCl₂) possessing surface areas of 629 m²·g^-1 and a micropore rate of 73.5%. For ZnCl₂ activated melon seed (C_MS-ZnCl₂), the surface area and micropore rate increased to 1081 m²·g^-1 and 80.0%, respectively. In addition, the introduction of ZnCl₂ also caused the increase in surface O content and reduced the acidity of the catalyst. The results represented that C_MS-ZnCl₂ with uniform honeycomb morphology displayed the best properties, and the as-prepared Pd/C_MS-ZnCl₂ catalyst afforded 100% hydrogen selectivity as well as excellent catalytic activity with an initial high turnover number (TON) value of 28.3 at 30 °C and 100.1 at 60 °C.

SUBMITTER: Cao T

PROVIDER: S-EPMC8624553 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Facile Synthesis of Nitrogen-Doped Microporous Carbon Spheres for High Performance Symmetric Supercapacitors.

Project description:Nitrogen-doped microporous carbon spheres (NMCSs) are successfully prepared via carbonization and KOH activation of phenol-formaldehyde resin polymer spheres synthesized by a facile and time-saving one-step hydrothermal strategy using triblock copolymer Pluronic F108 as a soft template under the Stöber-like method condition. The influence of the ethanol/water volume ratios and carbonation temperatures on the morphologies, pore structures and electrochemical performances of the prepared NMCSs are investigated systematically. The optimal NMCSs have a large specific surface area of 1517 m2 g-?1 with a pore volume of 0.8 cm3 g-?1. The X-ray photo-electron spectroscopy analysis reveals a suitable nitrogen-doped content of 2.6 at.%. The as-prepared NMCSs used as supercapacitor electrode materials exhibit an outstanding specific capacitance of 416 F g-?1 at a current density of 0.2 A g-?1, also it shows an excellent charge/discharge cycling stability with 96.9% capacitance retention after 10,000 cycles. The constructed symmetric supercapacitors using PVA/KOH as the gel electrolyte can deliver a specific capacitance of 60.6 F g-?1 at current density of 1 A g-?1. A maximum energy density of 21.5 Wh kg-?1 can be achieved at a power density of 800 W kg-?1, and the energy density still maintains 13.3 Wh kg-?1 even at a high power density of 16 kW kg-?1. The results suggest that this work can open up a facile and effective way to synthesize the NMCSs for electrode materials of high performance energy storage devices.

| S-EPMC6172159 | biostudies-literature

Facile synthesis of highly efficient and recyclable magnetic solid acid from biomass waste.

Project description:In this work, sawdust, a biomass waste, is converted into a magnetic porous carbonaceous (MPC) solid acid catalyst by an integrated fast pyrolysis-sulfonation process. The resultant magnetic solid acid has a porous structure with high surface area of 296.4 m(2) g(-1), which can be attributed to the catalytic effect of Fe. The catalytic activity and recyclability of the solid acid catalyst are evaluated during three typical acid-catalyzed reactions: esterification, dehydration, and hydrolysis. The favorable catalytic performance in all three reactions is attributed to the acid's high strength with 2.57 mmol g(-1) of total acid sites. Moreover, the solid acid can be reused five times without a noticeable decrease in catalytic activity, indicating the stability of the porous carbon (PC)-sulfonic acid group structure. The findings in the present work offer effective alternatives for environmentally friendly utilization of abundant biomass waste.

| S-EPMC3741625 | biostudies-literature

Cobalt-Catalyzed Aqueous Dehydrogenation of Formic Acid.

Project description:Among the known liquid organic hydrogen carriers, formic acid attracts increasing interest in the context of safe and reversible storage of hydrogen. Here, the first molecularly defined cobalt pincer complex is disclosed for the dehydrogenation of formic acid in aqueous medium under mild conditions. Crucial for catalytic activity is the use of the specific complex 3. Compared to related ruthenium and manganese complexes 7 and 8, this optimal cobalt complex showed improved performance. DFT computations support an innocent non-classical bifunctional outer-sphere mechanism on the triplet state potential energy surface.

| S-EPMC6618042 | biostudies-literature

Fast Microwave Synthesis of Hierarchical Porous Carbons from Waste Palm Boosted by Activated Carbons for Supercapacitors.

Project description:The synthesis of biomass-derived porous carbons (PCs) for supercapacitors by conventional two-steps method (chemical activation after carbonization) is complicated and time-consuming. In this study, we present a one-step microwave activation strategy to prepare hierarchically PCs from waste palm boosted by activated carbons (ACs). ACs with various specific surface areas (14, 642, and 1344 m²·g-1) were used for the first time to fast absorb microwave energy for converting waste palm into hierarchically PCs, that is, PC1, PC2, and PC3, respectively. The morphological and structural characterizations of PCs were studied. Also, the electrochemical performances of supercapacitors based on PCs as electrodes were further investigated. The results showed that the PC (PC1) boosted by AC with the lowest specific surface area possessed a porous structure (containing micro-, meso-, and macro- pores) with the largest specific surface area (1573 m²·g-1) and the highest micropore volume (0.573 cm³·g-1), as well as the suitable mesoporosity (29.69%). The as-prepared PC1 supercapacitor even in a gel electrolyte (PVA/LiCl) exhibited a high specific capacitance of 226.0 F·g-1 at 0.5 A·g-1 and presented excellent charge-discharge performance with an energy density of 72.3 Wh·kg-1 at a power density of 1.4 kW·kg-1 and 50.0 Wh·kg-1 at 28.8 kW·kg-1. Moreover, this promising method exhibited a simple, rapid, and cost-effective preparation of carbon materials from renewable biomass for energy storage applications.

| S-EPMC6473988 | biostudies-literature

Waste-Glycerol-Directed Synthesis of Mesoporous Silica and Carbon with Superior Performance in Room-Temperature Hydrogen Production from Formic Acid.

Project description:The development of easier, cheaper, and more ecofriendly synthetic methods for mesoporous materials remains a challenging topic to commercialize them, and the transformation of waste glycerol, as a biodiesel byproduct, into something useful and salable is one of the pending issues to be resolved. Here we first report that mesoporous silica (KIE-6) and carbon (KIE-7) can be simultaneously synthesized by using cheap and ecofriendly crude-waste-glycerol of biodiesel with or without glycerol purification, and we demonstrated the excellent performance of the mesoporous material as a catalyst support for formic acid decomposition. As a result, Pd-MnOx catalysts supported on NH2-functionalized KIE-6 showed the highest catalytic activity (TOF: 540.6?h(-1)) ever reported for room-temperature formic acid decomposition without additives. Moreover, we conducted life-cycle assessment (LCA) from biomass cultivation through biodiesel production to KIE-6 and KIE-7 preparation, and it was confirmed that CO2 emission during synthesis of KIE-6 and KIE-7 could be reduced by 87.1% and 85.7%, respectively. We believe that our study suggested more ecofriendly and industry-friendly approaches for preparation of mesoporous materials, and utilization of waste glycerol.

| S-EPMC4626865 | biostudies-other

Facile synthesis of ordered mesoporous zinc alumina catalysts and their dehydrogenation behavior.

Project description:Ordered mesoporous Zn/Al2O3 materials with varying Zn content were simply prepared via an evaporation-induced self-assembly (EISA) method. Dehydrogenation of isobutane to isobutene was carried out on these materials; an isobutane conversion of 45.0% and isobutene yield of 39.0% were obtained over the 10%Zn/Al2O3 catalyst at 580 °C with 300 h-1 GHSV. The obtained materials with Zn content up to 10% possess large specific surface area and big pore volume and zinc species can be highly dispersed on the surface or incorporated into the framework. The acidity of these catalysts was changed by the introduction of Zn, the decrease of strong acid sites is conducive to the promotion of isobutene selectivity and the weak and medium acidic sites played an important role in isobutane conversion. In addition, these catalysts exhibited good catalytic stability, due to the effective inhibition of coke formation by the ordered mesoporous structure.

| S-EPMC9062119 | biostudies-literature

A prolific catalyst for dehydrogenation of neat formic acid.

Project description:Formic acid is a promising energy carrier for on-demand hydrogen generation. Because the reverse reaction is also feasible, formic acid is a form of stored hydrogen. Here we present a robust, reusable iridium catalyst that enables hydrogen gas release from neat formic acid. This catalysis works under mild conditions in the presence of air, is highly selective and affords millions of turnovers. While many catalysts exist for both formic acid dehydrogenation and carbon dioxide reduction, solutions to date on hydrogen gas release rely on volatile components that reduce the weight content of stored hydrogen and/or introduce fuel cell poisons. These are avoided here. The catalyst utilizes an interesting chemical mechanism, which is described on the basis of kinetic and synthetic experiments.

| S-EPMC4834634 | biostudies-literature

Oxygen-rich microporous carbons with exceptional hydrogen storage capacity.

Project description:Porous carbons have been extensively investigated for hydrogen storage but, to date, appear to have an upper limit to their storage capacity. Here, in an effort to circumvent this upper limit, we explore the potential of oxygen-rich activated carbons. We describe cellulose acetate-derived carbons that combine high surface area (3800?m2?g-1) and pore volume (1.8?cm3?g-1) that arise almost entirely (>90%) from micropores, with an oxygen-rich nature. The carbons exhibit enhanced gravimetric hydrogen uptake (8.1?wt% total and 7.0?wt% excess) at -196?°C and 20?bar, rising to a total uptake of 8.9?wt% at 30?bar, and exceptional volumetric uptake of 44?g?l-1 at 20?bar, and 48?g?l-1 at 30?bar. At room temperature they store up to 0.8?wt% (excess) and 1.2?wt% (total) hydrogen at only 30?bar, and their isosteric heat of hydrogen adsorption is above 10?kJ?mol-1.

| S-EPMC5691040 | biostudies-literature

Meso/Microporous Carbons from Conjugated Hyper-Crosslinked Polymers Based on Tetraphenylethene for High-Performance CO2 Capture and Supercapacitor.

Project description:In this study, we successfully synthesized two types of meso/microporous carbon materials through the carbonization and potassium hydroxide (KOH) activation for two different kinds of hyper-crosslinked polymers of TPE-CPOP1 and TPE-CPOP2, which were synthesized by using Friedel-Crafts reaction of tetraphenylethene (TPE) monomer with or without cyanuric chloride in the presence of AlCl3 as a catalyst. The resultant porous carbon materials exhibited the high specific area (up to 1100 m2 g-1), total pore volume, good thermal stability, and amorphous character based on thermogravimetric (TGA), N2 adsoprtion/desorption, and powder X-ray diffraction (PXRD) analyses. The as-prepared TPE-CPOP1 after thermal treatment at 800 °C (TPE-CPOP1-800) displayed excellent CO2 uptake performance (1.74 mmol g-1 at 298 K and 3.19 mmol g-1 at 273 K). Furthermore, this material possesses a high specific capacitance of 453 F g-1 at 5 mV s-1 comparable to others porous carbon materials with excellent columbic efficiencies for 10,000 cycle at 20 A g-1.

| S-EPMC7866987 | biostudies-literature

Disentangling heterogeneous thermocatalytic formic acid dehydrogenation from an electrochemical perspective.

Project description:Heterogeneous thermocatalysis of formic acid dehydrogenation by metals in solution is of great importance for chemical storage and production of hydrogen. Insightful understanding of the complicated formic acid dehydrogenation kinetics at the metal-solution interface is challenging and yet essential for the design of efficient heterogeneous formic acid dehydrogenation systems. In this work, formic acid dehydrogenation kinetics is initially studied from a perspective of electrochemistry by decoupling this reaction on Pd catalyst into two short-circuit half reactions, formic acid oxidation reaction and hydrogen evolution reaction and manipulating the electrical double layer impact from the solution side. The pH-dependences of formic acid dehydrogenation kinetics and the associated cation effect are attributed to the induced change of electric double layer structure and potential by means of electrochemical measurements involving kinetic isotope effect, in situ infrared spectroscopy as well as grand canonical quantum mechanics calculations. This work showcases how kinetic puzzles on some important heterogeneous catalytic reactions can be tackled by electrochemical theories and methodologies.

| S-EPMC11362458 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data