Browse
Submit Data
Databases
API
Help

Dataset Information

25 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Electrochemical and Fluorescent Properties of Crown Ether Functionalized Graphene Quantum Dots for Potassium and Sodium Ions Detection.

ABSTRACT: The concentration of sodium and potassium ions in biological fluids, such as blood, urine and sweat, is indicative of several basic body function conditions. Therefore, the development of simple methods able to detect these alkaline ions is of outmost importance. In this study, we explored the electrochemical and optical properties of graphene quantum dots (GQDs) combined with the selective chelating ability of the crown ethers 15-crown-5 and 18-crown-6, with the final aim to propose novel composites for the effective detection of these ions. The results obtained comparing the performances of the single GQDs and crown ethers with those of the GQDs-15-crown-5 and GQDs-18-crown-6 composites, have demonstrated the superior properties of these latter. Electrochemical investigation showed that the GQDs based composites can be exploited for the potentiometric detection of Na⁺ and K⁺ ions, but selectivity still remains a concern. The nanocomposites showed the characteristic fluorescence emissions of GQDs and crown ethers. The GQDs-18-crown-6 composite exhibited ratiometric fluorescence emission behavior with the variation of K⁺ concentration, demonstrating its promising properties for the development of a selective fluorescent method for potassium determination.

SUBMITTER: Iannazzo D

PROVIDER: S-EPMC8625964 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Electrochemical Method To Prepare Graphene Quantum Dots and Graphene Oxide Quantum Dots.

Project description:In this study, we present the preparation of graphene quantum dots (GQDs) and graphene oxide quantum dots (GOQDs). GQDs/GOQDs are prepared by an easy electrochemical exfoliation method, in which two graphite rods are used as electrodes. The electrolyte used is a combination of citric acid and alkali hydroxide in water. Four types of quantum dots, GQD1-GQD4, are prepared by varying alkali hydroxide concentration in the electrolyte, while keeping the citric acid concentration fixed. Variation of alkali hydroxide concentration in the electrolyte results in the production of GOQDs. Balanced reaction of citric acid and alkali hydroxide results in the production of GQDs (GQD3). However, three variations in alkali hydroxide concentration result in GOQDs (GQD1, GQD2, and GQD4). GOQDs show tunable oxygen functional groups, which are confirmed by X-ray photoelectron spectroscopy. GQDs/GOQDs show absorption in the UV region and show excitation-dependent photoluminescence behavior. The obtained average size is 2-3 nm, as revealed by transmission electron microscopy. X-ray diffraction peak at around 10° and broad D band peak at 1350 cm-1 in Raman spectra confirm the presence of oxygen-rich functional groups on the surface of GOQDs. These GQDs and GOQDs show blue to green luminescence under 365 nm UV irradiation.

| S-EPMC6645081 | biostudies-literature

Rapid Synthesis of Highly Fluorescent Nitrogen-Doped Graphene Quantum Dots for Effective Detection of Ferric Ions and as Fluorescent Ink.

Project description:Graphene quantum dots (GQDs) have attracted much attention of many researchers because of their low cytotoxicity, good optical stability, and excellent photoluminescence property, which make them novel nanostructured materials in many application fields ranging from energy to biomedicine and the environment. In this work, highly fluorescent nitrogen-doped graphene quantum dots (N-GQDs) were synthesized through microwave heating using sodium citrate and triethanolamine as raw materials. The as-prepared N-GQDs showed considerable bright blue fluorescence with a quantum yield of 8% and excellent uniform dispersion with an average diameter of approximately 5.6 nm; they also exhibited excellent stability and pH-sensitive properties. Furthermore, we demonstrated the application of N-GQDs as probes for metal ion detection. The results indicated that N-GQDs responded rapidly toward Fe3+ because of the static quenching mechanism. A detection method was proposed, with detection linear in two ranges from 20 to 70 nM (F = -0.9666 C Fe 3+ (nM) + 608.85 (R = 0.9740)) and from 1 to 100 ?M (F = -12.04 C Fe 3+ (?M) + 1191.94 (R = 0.9541)); the lowest detection limit of 9.7 nM for Fe3+ was obtained. The results obtained in this work lay the foundation for the development of high-performance and robust metal ion detection sensors. Moreover, it can also possibly be used as a new type of fluorescent ink.

| S-EPMC6776961 | biostudies-literature

Fluorescent graphene quantum dots as traceable, pH-sensitive drug delivery systems.

Project description:Graphene quantum dots (GQDs) were rationally fabricated as a traceable drug delivery system for the targeted, pH-sensitive delivery of a chemotherapeutic drug into cancer cells. The GQDs served as fluorescent carriers for a well-known anticancer drug, doxorubicin (Dox). The whole system has the capacity for simultaneous tracking of the carrier and of drug release. Dox release is triggered upon acidification of the intracellular vesicles, where the carriers are located after their uptake by cancer cells. Further functionalization of the loaded carriers with targeting moieties such as arginine-glycine-aspartic acid (RGD) peptides enhanced their uptake by cancer cells. DU-145 and PC-3 human prostate cancer cell lines were used to evaluate the anticancer ability of Dox-loaded RGD-modified GQDs (Dox-RGD-GQDs). The results demonstrated the feasibility of using GQDs as traceable drug delivery systems with the ability for the pH-triggered delivery of drugs into target cells.

| S-EPMC4630193 | biostudies-literature

Multicolor Fluorescent Graphene Oxide Quantum Dots for Sensing Cancer Cell Biomarkers.

Project description:Onion-like carbon nanoparticles were synthesized from diamond nanoparticles to be used as the precursor for graphene oxide quantum dots. Onion-like carbon nanoparticles were exfoliated to produce two types of nanoparticles, graphene oxide quantum dots that showed size-dependent fluorescence and highly stable inner cores. Multicolor fluorescent quantum dots were obtained and characterized using different techniques. Polyacrylamide gel electrophoresis showed a range of emission wavelengths spanning from red to blue with the highest intensity shown by green fluorescence. Using high-resolution transmission electron microscopy, we calculated a unit cell size of 2.47 Å in a highly oxidized and defected structure of graphene oxide. A diameter of ca. 4 nm and radius of gyration of ca. 11 Å were calculated using small-angle X-ray scattering. Finally, the change in fluorescence of the quantum dots was studied when single-stranded DNA that is recognized by telomerase was attached to the quantum dots. Their interaction with the telomerase present in cancer cells was observed and a change was seen after six days, providing an important application of these modified graphene oxide quantum dots for cancer sensing.

| S-EPMC8205432 | biostudies-literature

Surface Enhanced Raman Scattering in Graphene Quantum Dots Grown via Electrochemical Process.

Project description:Graphene Quantum dots (GQDs) are used as a surface-enhanced Raman substrate for detecting target molecules with large specific surface areas and more accessible edges to enhance the signal of target molecules. The electrochemical process is used to synthesize GQDs in the solution-based process from which the SERS signals were obtained from GQDs Raman spectra. In this work, GQDs were grown via the electrochemical process with citric acid and potassium chloride (KCl) electrolyte solution to obtain GQDs in a colloidal solution-based format. Then, GQDs were characterized by transmission electron microscope (TEM), Fourier-transform infrared spectroscopy (FTIR), and Raman spectroscopy, respectively. From the results, SERS signals had observed via GQDs spectra through the Raman spectra at D (1326 cm-1) and G (1584 cm-1), in which D intensity is defined as the presence of defects on GQDs and G is the sp2 orbital of carbon signal. The increasing concentration of KCl in the electrolyte solution for 0.15M to 0.60M demonstrated the increment of Raman intensity at the D peak of GQDs up to 100 over the D peak of graphite. This result reveals the potential feasibility of GQDs as SERS applications compared to graphite signals.

| S-EPMC8471654 | biostudies-literature

A Novel Lubricant Based on Covalent Functionalized Graphene Oxide Quantum Dots.

Project description:Dodecyl amine edge functionalized few-layer graphene oxide quantum dots were synthesized in good yields. The covalent functionalization was demonstrated with NMR and AFM-IR. The resulting structure and particle size was measured with AFM and HRTEM. The thermal stability of the compound was investigated and showed a stability of up to 220?°C. The modified graphene oxide quantum dots showed excellent solubility in various organic solvents, including ethers, methanol, toluene, n-hexane, heptane, xylene, dichloromethane and toluene. The stability of a resulting toluene solution was also proven by static light scattering measurements over several days. The excellent solubility gives the possibility of an efficient and fast spray application of the functionalized graphene oxide quantum dots to steel surfaces. Hence, the macroscopic friction behavior was investigated with a Thwing-Albert FP-2250 friction tester. A thin film of the dodecyl amine functionalized graphene oxide quantum dots on steel lowered the friction coefficient from 0.17 to 0.11 and revealed a significant corrosion inhibition effect.

| S-EPMC5895846 | biostudies-other

Theoretical Investigations of Optical Origins of Fluorescent Graphene Quantum Dots.

Project description:The optical properties of graphene quantum dots (GQDs) were investigated theoretically. We focused on the photoinduced charge transfer and electron-hole coherence of single-layer graphene in the electronic transitions in the visible regions. Surface functionalization with donor or acceptor groups produced a red shift in the absorption spectrum, and electrons and holes were highly delocalized. The recombination of excited, well-separated electron-hole (e-h) pairs can result in enhanced fluorescence. This fluorescence enhancement by surface functionalization occurs because of the decreased symmetry of the graphene resulting from the roughened structure of the surface-functionalized GQDs.

| S-EPMC4837401 | biostudies-other

Ultrasensitive Detection of Fe<sup>3+</sup> Ions Using Functionalized Graphene Quantum Dots Fabricated by a One-Step Pulsed Laser Ablation Process.

Project description:With respect to the detection of Fe3+ ions, graphene quantum dots (GQDs) have limitations for commercialization owing to their high limit of detection (LOD). Here, we report a one-step pulsed laser ablation (PLA) process to fabricate amino-functionalized GQDs (FGQDs) for the efficient detection of Fe3+ using polypyrrole (PPy) both as a precursor (amine N) and as a surfactant and also using graphite as a carbon precursor. Using this method, the amine N groups were easily incorporated into the carbon network of the GQDs. Additionally, compared to pristine GQDs, FGQDs showed smaller particle sizes and narrower size distributions owing to the surface passivation effects of the PPy surfactant. Due to the synergistic effect of surface passivation and incorporation of amine N groups, FGQDs exhibited a sensitive response to Fe3+ ions in the concentration range of 500 nM to 50 μM, which is lower than the quality standards for Fe3+ ions (∼5.36 μM) as suggested by the World Health Organization (WHO). Furthermore, the processing time for synthesizing FGQDs by the PLA process was less than 30 min, thus allowing successful practical applications of GQDs in the sensing field.

| S-EPMC8771691 | biostudies-literature

Plasmonic fluorescent quantum dots.

Project description:Combining multiple discrete components into a single multifunctional nanoparticle could be useful in a variety of applications. Retaining the unique optical and electrical properties of each component after nanoscale integration is, however, a long-standing problem. It is particularly difficult when trying to combine fluorophores such as semiconductor quantum dots with plasmonic materials such as gold, because gold and other metals can quench the fluorescence. So far, the combination of quantum dot fluorescence with plasmonically active gold has only been demonstrated on flat surfaces. Here, we combine fluorescent and plasmonic activities in a single nanoparticle by controlling the spacing between a quantum dot core and an ultrathin gold shell with nanometre precision through layer-by-layer assembly. Our wet-chemistry approach provides a general route for the deposition of ultrathin gold layers onto virtually any discrete nanostructure or continuous surface, and should prove useful for multimodal bioimaging, interfacing with biological systems, reducing nanotoxicity, modulating electromagnetic fields and contacting nanostructures.

| S-EPMC2773548 | biostudies-literature

Cane Molasses Graphene Quantum Dots Passivated by PEG Functionalization for Detection of Metal Ions.

Project description:Poly(ethylene glycol) passivated graphene quantum dots (PEG-GQDs) were synthesized based on a green and effective strategy of the hydrothermal treatment of cane molasses. The prepared PEG-GQDs, with an average size of 2.5 nm, exhibit a brighter blue fluorescence and a higher quantum yield (QY) (up to approximately 21.32%) than the QY of GQDs without surface passivation (QY = 10.44%). The PEG-GQDs can be used to detect and quantify paramagnetic transition-metal ions including Fe3+, Cu2+, Co2+, Ni2+, Pb2+, and Mn2+. In the case of ethylenediaminetetraacetic acid (EDTA) solution as a masking agent, Fe3+ ions can be well selectively determined in a transition-metal ion mixture, following the lowest limit of detection (LOD) of 5.77 ?M. The quenching mechanism of Fe3+ on PEG-GQDs belongs to dynamic quenching. Furthermore, Fe3+ in human serum can be successfully detected by the PEG-GQDs, indicating that the green prepared PEG-GQDs can be applied as a promising candidate for the selective detection of Fe3+ in clinics.

| S-EPMC7114702 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data