Browse
Submit Data
Databases
API
Help

Dataset Information

29 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

A new strategy for the fabrication of a flexible and highly sensitive capacitive pressure sensor.

ABSTRACT: The development of flexible capacitive pressure sensors has wide application prospects in the fields of electronic skin and intelligent wearable electronic devices, but it is still a great challenge to fabricate capacitive sensors with high sensitivity. Few reports have considered the use of interdigital electrode structures to improve the sensitivity of capacitive pressure sensors. In this work, a new strategy for the fabrication of a high-performance capacitive flexible pressure sensor based on MXene/polyvinylpyrrolidone (PVP) by an interdigital electrode is reported. By increasing the number of interdigital electrodes and selecting the appropriate dielectric layer, the sensitivity of the capacitive sensor can be improved. The capacitive sensor based on MXene/PVP here has a high sensitivity (~1.25 kPa^-1), low detection limit (~0.6 Pa), wide sensing range (up to 294 kPa), fast response and recovery times (~30/15 ms) and mechanical stability of 10000 cycles. The presented sensor here can be used for various pressure detection applications, such as finger pressing, wrist pulse measuring, breathing, swallowing and speech recognition. This work provides a new method of using interdigital electrodes to fabricate a highly sensitive capacitive sensor with very promising application prospects in flexible sensors and wearable electronics.

SUBMITTER: Qin R

PROVIDER: S-EPMC8630520 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

A Highly Sensitive and Flexible Capacitive Pressure Sensor Based on Alignment Airgap Dielectric.

Project description:Flexible capacitive pressure sensors with a simple structure and low power consumption are attracting attention, owing to their wide range of applications in wearable electronic devices. However, it is difficult to manufacture pressure sensors with high sensitivity, wide detection range, and low detection limits. We developed a highly sensitive and flexible capacitive pressure sensor based on the porous Ecoflex, which has an aligned airgap structure and can be manufactured by simply using a mold and a micro-needle. The existence of precisely aligned airgap structures significantly improved the sensor sensitivity compared to other dielectric structures without airgaps. The proposed capacitive pressure sensor with an alignment airgap structure supports a wide range of working pressures (20-100 kPa), quick response time (≈100 ms), high operational stability, and low-pressure detection limit (20 Pa). Moreover, we also studied the application of pulse wave monitoring in wearable sensors, exhibiting excellent performance in wearable devices that detect pulse waves before and after exercise. The proposed pressure sensor is applicable in electronic skin and wearable medical assistive devices owing to its excellent functional features.

| S-EPMC9571520 | biostudies-literature

Facile Fabrication of a Highly Sensitive and Robust Flexible Pressure Sensor with Batten Microstructures.

Project description:As the foremost component of wearable devices, flexible pressure sensors require high sensitivity, wide operating ranges, and great stability. In this paper, a pressure sensor comprising a regular batten microstructure active layer is presented. First, the influences of the dimensional parameters of the microstructures on the performances of the sensors were investigated by the mechanical finite element method (FEM). Then, parameters were optimized and determined based on the results of this investigation. Next, active layers were prepared by molding multiwalled carbon nanotube/polyurethane (MWCNT/PU) conductive composite using a printed circuit board template. Finally, a resistive flexible pressure sensor was fabricated by combining an active layer and an interdigital electrode. With advantages in terms of the structure and materials, the sensor exhibited a sensitivity of up to 46.66 kPa-1 in the range of 0-1.5 kPa and up to 6.67 kPa-1 in the range of 1.5-7.5 kPa. The results of the experiments show that the designed flexible pressure sensor can accurately measure small pressures and realize real-time human physiological monitoring. Furthermore, the preparation method has the advantages of a low cost, simple design, and high consistency. Thus, it has potential to promote the development of flexible sensors, wearable devices, and other related devices.

| S-EPMC9329788 | biostudies-literature

Scalable Fabrication of Highly Flexible Porous Polymer-Based Capacitive Humidity Sensor Using Convergence Fiber Drawing.

Project description:In this study, we fabricated a highly flexible fiber-based capacitive humidity sensor using a scalable convergence fiber drawing approach. The sensor's sensing layer is made of porous polyetherimide (PEI) with its porosity produced in situ during fiber drawing, whereas its electrodes are made of copper wires. The porosity induces capillary condensation starting at a low relative humidity (RH) level (here, 70%), resulting in a significant increase in the response of the sensor at RH levels ranging from 70% to 80%. The proposed humidity sensor shows a good sensitivity of 0.39 pF/% RH in the range of 70%-80% RH, a maximum hysteresis of 9.08% RH at 70% RH, a small temperature dependence, and a good stability over a 48 h period. This work demonstrates the first fiber-based humidity sensor fabricated using convergence fiber drawing.

| S-EPMC6960705 | biostudies-literature

Flexible Highly Sensitive Pressure Sensor Based on Ionic Liquid Gel Film.

Project description:Flexible, semitransparent ionic liquid gel (ionogels) film was first fabricated by in situ polymerization. The optimized ionogels exhibited excellent mechanical properties, high conductivity, and force sensing characteristics. The multifunctional sensor based on the ionogel film was constructed and provided the high sensitivity of 15.4 kPa-1 and wide detection range sensing from 5 Pa to 5 kPa. Moreover, the aforementioned sensor demonstrated excellent mechanical stability against repeated external deformations (for 3000 cycles under 90° bending). Importantly, the sensor showed advantages in detection of environmental changes to the external stimulus of subtle signals, including a rubber blower blowing the sensor, gently touching, torsion, and bending.

| S-EPMC6641298 | biostudies-literature

A Flexible and Highly Sensitive Inductive Pressure Sensor Array Based on Ferrite Films.

Project description:There is a rapid growing demand for highly sensitive, easy adaptive and low-cost pressure sensing solutions in the fields of health monitoring, wearable electronics and home care. Here, we report a novel flexible inductive pressure sensor array with ultrahigh sensitivity and a simple construction, for large-area contact pressure measurements. In general, the device consists of three layers: a planar spiral inductor layer and ferrite film units attached on a polyethylene terephthalate (PET) membrane, which are separated by an array of elastic pillars. Importantly, by introducing the ferrite film with an excellent magnetic permeability, the effective permeability around the inductor is greatly influenced by the separation distance between the inductor and the ferrite film. As a result, the value of the inductance changes largely as the separation distance varies as an external load applies. Our device has achieved an ultrahigh sensitivity of 1.60 kPa-1 with a resolution of 13.61 Pa in the pressure range of 0-0.18 kPa, which is comparable to the current state-of-the-art flexible pressure sensors. More remarkably, our device shows an outstanding stability when exposed to environmental interferences, e.g., electrical noises from skin surfaces (within 0.08% variations) and a constant pressure load for more than 32 h (within 0.3% variations). In addition, the device exhibits a fast response time of 111 ms and a good repeatability under cyclic pressures varying from 38.45 to 177.82 Pa. To demonstrate its practical usage, we have successfully developed a 4 × 4 inductive pressure sensor array into a wearable keyboard for a smart electronic calendar application.

| S-EPMC6566628 | biostudies-literature

A Flexible and Highly Sensitive Pressure Sensor Based on AgNWs/NRLF for Hand Motion Monitoring.

Project description:Flexible, highly sensitive, easy fabricating process, low-cost pressure sensors are the trend for flexible electronic devices. Inspired by the softness, comfortable, environmental friendliness and harmless of natural latex mattress, herein, we report an agile approach of constructing a flexible 3D-architectured conductive network by dip-coating silver nanowires (AgNWs) on the natural rubber latex foam (NRLF) substrate that provide the 3D micro-network structure as the skeleton. The variation of the contact transformed into the electrical signal among the conductive three-dimensional random networks during compressive deformation is the piezoresistive effect of AgNWs/NRLF pressure sensors. The resulting AgNWs/NRLF pressure sensors exhibit desirable electrical conductivity (0.45-0.50 S/m), excellent flexibility (58.57 kPa at 80% strain), good hydrophobicity (~128° at 5th dip-coated times) and outstanding repeatability. The AgNWs/NRLF sensors can be assembled on a glove to detect hand motion sensitively such as bending, touching and holding, show potential application such as artificial skin, human prostheses and health monitoring in multifunctional pressure sensors.

| S-EPMC6669722 | biostudies-literature

A Highly Sensitive, Reliable, and High-Temperature-Resistant Flexible Pressure Sensor Based on Ceramic Nanofibers.

Project description:Flexible pressure sensors are essential components for soft electronics by providing physiological monitoring capability for wearables and tactile perceptions for soft robotics. Flexible pressure sensors with reliable performance are highly desired yet challenging to construct to meet the requirements of practical applications in daily activities and even harsh environments, such as high temperatures. This work describes a highly sensitive and reliable capacitive pressure sensor based on flexible ceramic nanofibrous networks with high structural elasticity, which minimizes performance degradation commonly seen in polymer-based sensors because of the viscoelastic behavior of polymers. Such ceramic pressure sensors exhibit high sensitivity (≈4.4 kPa-1), ultralow limit of detection (<0.8 Pa), fast response speed (<16 ms) as well as low fatigue over 50 000 loading/unloading cycles. The high stability is attributed to the excellent mechanical stability of the ceramic nanofibrous network. By employing textile-based electrodes, a fully breathable and wearable ceramic pressure sensor is demonstrated for real-time health monitoring and motion detection. Owing to the high-temperature resistance of ceramics, the ceramic nanofibrous network sensor can function properly at temperatures up to 370 °C, showing great promise for harsh environment applications.

| S-EPMC7507114 | biostudies-literature

Highly Sensitive and Flexible Capacitive Pressure Sensors Combined with Porous Structure and Hole Array Using Sacrificial Templates and Laser Ablation.

Project description:Flexible, wearable pressure sensors offer numerous benefits, including superior sensing capabilities, a lightweight and compact design, and exceptional conformal properties, making them highly sought after in various applications including medical monitoring, human-computer interactions, and electronic skins. Because of their excellent characteristics, such as simple fabrication, low power consumption, and short response time, capacitive pressure sensors have received widespread attention. As a flexible polymer material, polydimethylsiloxane (PDMS) is widely used in the preparation of dielectric layers for capacitive pressure sensors. The Young's modulus of the flexible polymer can be effectively decreased through the synergistic application of sacrificial template and laser ablation techniques, thereby improving the functionality of capacitive pressure sensors. In this study, a novel sensor was introduced. Its dielectric layer was developed through a series of processes, including the use of a sacrificial template method using NaCl microparticles and subsequent CO2 laser ablation. This porous PDMS dielectric layer, featuring an array of holes, was then sandwiched between two flexible electrodes to create a capacitive pressure sensor. The sensor demonstrates a sensitivity of 0.694 kPa-1 within the pressure range of 0-1 kPa and can effectively detect pressures ranging from 3 Pa to 200 kPa. The sensor demonstrates stability for up to 500 cycles, with a rapid response time of 96 ms and a recovery time of 118 ms, coupled with a low hysteresis of 6.8%. Furthermore, our testing indicates that the sensor possesses limitless potential for use in detecting human physiological activities and delivering signals.

| S-EPMC11359779 | biostudies-literature

Ultra-Sensitive Flexible Pressure Sensor Based on Microstructured Electrode.

Project description:Flexible pressure sensors with a high sensitivity in the lower zone of a subtle-pressure regime has shown great potential in the fields of electronic skin, human-computer interaction, wearable devices, intelligent prosthesis, and medical health. Adding microstructures on the dielectric layer on a capacitive pressure sensor has become a common and effective approach to enhance the performance of flexible pressure sensors. Here, we propose a method to further dramatically increase the sensitivity by adding elastic pyramidal microstructures on one side of the electrode and using a thin layer of a dielectric in a capacitive sensor. The sensitivity of the proposed device has been improved from 3.1 to 70.6 kPa-1 compared to capacitive sensors having pyramidal microstructures in the same dimension on the dielectric layer. Moreover, a detection limit of 1 Pa was achieved. The finite element analysis performed based on electromechanical sequential coupling simulation for hyperelastic materials indicates that the microstructures on electrode are critical to achieve high sensitivity. The influence of the duty ratio of the micro-pyramids on the sensitivity of the sensor is analyzed by both simulation and experiment. The durability and robustness of the device was also demonstrated by pressure testing for 2000 cycles.

| S-EPMC7013555 | biostudies-literature

Highly Sensitive Active-Matrix Driven Self-Capacitive Fingerprint Sensor based on Oxide Thin Film Transistor.

Project description:The fingerprint recognition has been widely used for biometrics in mobile devices. Existing fingerprint sensors have already been commercialized in the field of mobile devices using primarily Si-based technologies. Recently, mutual-capacitive fingerprint sensors have been developed to lower production costs and expand the range of application using thin-film technologies. However, since the mutual-capacitive method detects the change of mutual capacitance, it has high ratio of parasitic capacitance to ridge-to-valley capacitance, resulting in low sensitivity, compared to the self-capacitive method. In order to demonstrate the self-capacitive fingerprint sensor, a switching device such as a transistor should be integrated in each pixel, which reduces a complexity of electrode configuration and sensing circuits. The oxide thin-film transistor (TFT) can be a good candidate as a switching device for the self-capacitive fingerprint sensor. In this work, we report a systematic approach for self-capacitive fingerprint sensor integrating Al-InSnZnO TFTs with field-effect mobility higher than 30 cm2/Vs, which enable isolation between pixels, by employing industry-friendly process methods. The fingerprint sensors are designed to reduce parasitic resistance and capacitance in terms of the entire system. The excellent uniformity and low leakage current (<10-12) of the oxide TFTs allow successful capture of a fingerprint image.

| S-EPMC6397235 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data