Browse
Submit Data
Databases
API
Help

Dataset Information

30 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Evaluation method on seismic risk of substation in strong earthquake area.

ABSTRACT: Frequent earthquakes in strong earthquake areas pose a great threat to the safety operation of electric power facilities. There exists a pressing research need to develop an assessment method for the seismic risk of substations, i.e., the hubs of power system networks. In this study, based on Incremental Dynamic Analysis (IDA), Probabilistic Seismic Demand Model (PSDM) and reliability theory, a vulnerability model for a substation is obtained, based on considering the relationships between Peak Ground Acceleration (PGA) and four seismic damage states (complete, extensive, moderate, and slight.) via a probabilistic approach. After an earthquake, the scope of influence and PGA distribution are evaluated using information recorded by the seismic observation stations, based on using interpolation or an empirical formula for the PGA attenuation. Therefore, the seismic risk can be evaluated by combining ground motion evaluation and the pre-built vulnerability model. The Wuqia- Kashgar area of Xinjiang was selected as the study area; it is an Earthquake-prone area, and one of the starting points for new energy transmission projects in China. Under a hypothetical earthquake (MS 7.9), the seismic risk of the substations was evaluated. The results show that: this method is able to give the probabilities of the four damage states of the substations, four substations close to the epicenter only have a probability of slight damage (45%-88%) and other substations are safer.

SUBMITTER: Cui J

PROVIDER: S-EPMC8639099 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Subducting seamounts control interplate coupling and seismic rupture in the 2014 Iquique earthquake area.

Project description:To date, the parameters that determine the rupture area of great subduction zone earthquakes remain contentious. On 1 April 2014, the Mw 8.1 Iquique earthquake ruptured a portion of the well-recognized northern Chile seismic gap but left large highly coupled areas un-ruptured. Marine seismic reflection and swath bathymetric data indicate that structural variations in the subducting Nazca Plate control regional-scale plate-coupling variations, and the limited extent of the 2014 earthquake. Several under-thrusting seamounts correlate to the southward and up-dip arrest of seismic rupture during the 2014 Iquique earthquake, thus supporting a causal link. By fracturing of the overriding plate, the subducting seamounts are likely further responsible for reduced plate-coupling in the shallow subduction zone and in a lowly coupled region around 20.5°S. Our data support that structural variations in the lower plate influence coupling and seismic rupture offshore Northern Chile, whereas the structure of the upper plate plays a minor role.

| S-EPMC4667434 | biostudies-other

Regional Seismic Information Entropy to Detect Earthquake Activation Precursors.

Project description:A method is presented to detect earthquake precursors from time series data on earthquakes in a target region. The Regional Entropy of Seismic Information (RESI) is an index that represents the average influence of an earthquake in a target region on the diversity of clusters to which earthquake foci are distributed. Based on a simple qualitative model of the dynamics of land crust, it is hypothesized that the saturation that occurs after an increase in RESI precedes the activation of earthquakes. This hypothesis is validated by the earthquake catalog. This temporal change was found to correlate with the activation of earthquakes in Japanese regions one to two years ahead of the real activation, more reliably than the compared baseline methods.

| S-EPMC7512422 | biostudies-literature

Opto-mechanical lab-on-fibre seismic sensors detected the Norcia earthquake.

Project description:We have designed and developed lab-on-fibre seismic sensors containing a micro-opto-mechanical cavity on the fibre tip. The mechanical cavity is designed as a double cantilever suspended on the fibre end facet and connected to a proof mass to tune its response. Ground acceleration leads to displacement of the cavity length, which in turn can be remotely detected using an interferometric interrogation technique. After the sensors characterization, an experimental validation was conducted at the Italian National Institute of Geophysics and Volcanology (INGV), which is responsible for seismic surveillance over the Italian country. The fabricated sensors have been continuously used for long periods to demonstrate their effectiveness as seismic accelerometer sensors. During the tests, fibre optic seismic accelerometers clearly detected the seismic sequence that culminated in the severe Mw6.5 Norcia earthquake that struck central Italy on October 30, 2016. The seismic data provided by the optical sensors were analysed by specialists at the INGV. The wave traces were compared with state-of-the-art traditional sensors typically incorporated into the INGV seismic networks. The comparison verifies the high fidelity of the optical sensors in seismic wave detection, indicating their suitability for a novel class of seismic sensors to be employed in practical scenarios.

| S-EPMC5923338 | biostudies-literature

MyShake: A smartphone seismic network for earthquake early warning and beyond.

Project description:Large magnitude earthquakes in urban environments continue to kill and injure tens to hundreds of thousands of people, inflicting lasting societal and economic disasters. Earthquake early warning (EEW) provides seconds to minutes of warning, allowing people to move to safe zones and automated slowdown and shutdown of transit and other machinery. The handful of EEW systems operating around the world use traditional seismic and geodetic networks that exist only in a few nations. Smartphones are much more prevalent than traditional networks and contain accelerometers that can also be used to detect earthquakes. We report on the development of a new type of seismic system, MyShake, that harnesses personal/private smartphone sensors to collect data and analyze earthquakes. We show that smartphones can record magnitude 5 earthquakes at distances of 10 km or less and develop an on-phone detection capability to separate earthquakes from other everyday shakes. Our proof-of-concept system then collects earthquake data at a central site where a network detection algorithm confirms that an earthquake is under way and estimates the location and magnitude in real time. This information can then be used to issue an alert of forthcoming ground shaking. MyShake could be used to enhance EEW in regions with traditional networks and could provide the only EEW capability in regions without. In addition, the seismic waveforms recorded could be used to deliver rapid microseism maps, study impacts on buildings, and possibly image shallow earth structure and earthquake rupture kinematics.

| S-EPMC4758737 | biostudies-literature

Precursory changes in seismic velocity for the spectrum of earthquake failure modes.

Project description:Temporal changes in seismic velocity during the earthquake cycle have the potential to illuminate physical processes associated with fault weakening and connections between the range of fault slip behaviors including slow earthquakes, tremor and low frequency earthquakes1. Laboratory and theoretical studies predict changes in seismic velocity prior to earthquake failure2, however tectonic faults fail in a spectrum of modes and little is known about precursors for those modes3. Here we show that precursory changes of wave speed occur in laboratory faults for the complete spectrum of failure modes observed for tectonic faults. We systematically altered the stiffness of the loading system to reproduce the transition from slow to fast stick-slip and monitored ultrasonic wave speed during frictional sliding. We find systematic variations of elastic properties during the seismic cycle for both slow and fast earthquakes indicating similar physical mechanisms during rupture nucleation. Our data show that accelerated fault creep causes reduction of seismic velocity and elastic moduli during the preparatory phase preceding failure, which suggests that real time monitoring of active faults may be a means to detect earthquake precursors.

| S-EPMC5010128 | biostudies-literature

Nucleation process of the 2011 northern Nagano earthquake from nearby seismic observations.

Project description:The 2011 magnitude (M) 9.0 Tohoku-oki earthquake was followed by seismicity activation in inland areas throughout Japan. An outstanding case is the M6.2 Northern Nagano earthquake, central Japan, occurred 13-h after the megathrust event, approximately 400 km away from its epicenter. The physical processes relating the occurrence of megathrust earthquakes and subsequent activation of relatively large inland earthquakes are not well understood. Here we use waveform data of a dense local seismic network to reveal with an unprecedented resolution the complex mechanisms leading to the occurrence of the M6.2 earthquake. We show that previously undetected small earthquakes initiated along the Nagano earthquake source fault at relatively short times after the Tohoku-oki megathrust earthquake, and the local seismicity continued intermittently until the occurrence of the M6.2 event, being likely 'modulated' by the arrival of surface waves from large, remote aftershocks off-shore Tohoku. About 1-h before the Nagano earthquake, there was an acceleration of micro-seismicity migrating towards its hypocenter. Migration speeds indicate potential localized slow-slip, culminating with the occurrence of the large inland earthquake, with fluids playing a seismicity-activation role at a regional scale.

| S-EPMC8052401 | biostudies-literature

Empirical assessment of seismic design hazard's exceedance area.

Project description:Design ground motion intensities determine the actions for which structures are checked, in the conventional approach of seismic codes, not to fail the target performances. On the other hand, due to inherent characteristics of probabilistic seismic hazard analysis (PSHA), it is expected that site-specific design intensity based on PSHA is exceeded in the epicentral area of moderate-to-high magnitude earthquakes. In the context of regional seismic loss assessment and of the evolution of seismic codes from the regulator perspective, it is useful to gather insights about the extent of the zone around the earthquake source where code-conforming structures are expected to be systematically exposed to seismic actions larger than those accounted for in design. To assess such areal extent based on empirical evidence is the scope of the study presented in the paper. To this aim, peak ground acceleration ShakeMap data for Italian earthquakes from 2008 to 2020 were compared to the current design intensities in the same areas for which the maps are available. This allowed, first, to develop simple semi-empirical models of the exceedance area versus the magnitude of the earthquakes. Second, it allowed to model the probability that an earthquake of given magnitude causes exceedance of the design intensity via logistic regressions. Coupling the first and second class of models provides an approximation of the expected exceedance (logarithmic) area upon occurrence of an earthquake of given magnitude. Such an area can be of several thousand square kilometers for earthquakes occurring relatively frequently in countries such as Italy.

| S-EPMC8458436 | biostudies-literature

A physics-based earthquake simulator replicates seismic hazard statistics across California.

Project description:Seismic hazard models are important for society, feeding into building codes and hazard mitigation efforts. These models, however, rest on many uncertain assumptions and are difficult to test observationally because of the long recurrence times of large earthquakes. Physics-based earthquake simulators offer a potentially helpful tool, but they face a vast range of fundamental scientific uncertainties. We compare a physics-based earthquake simulator against the latest seismic hazard model for California. Using only uniform parameters in the simulator, we find strikingly good agreement of the long-term shaking hazard compared with the California model. This ability to replicate statistically based seismic hazard estimates by a physics-based model cross-validates standard methods and provides a new alternative approach needing fewer inputs and assumptions for estimating hazard.

| S-EPMC6105231 | biostudies-other

Seismic Slip-Pulse Experiments Simulate Induced Earthquake Rupture in the Groningen Gas Field.

Project description:Rock materials show dramatic dynamic weakening in large-displacement (m), high-velocity (∼1 m/s) friction experiments, providing a mechanism for the generation of large, natural earthquakes. However, whether such weakening occurs during induced M3-4 earthquakes (dm displacements) is unknown. We performed rotary-shear experiments on simulated fault gouges prepared from the source-, reservoir- and caprock formations present in the seismogenic Groningen gas field (Netherlands). Water-saturated gouges were subjected to a slip pulse reaching a peak circumferential velocity of 1.2-1.7 m/s and total displacements of 13-20 cm, at 2.5-20 MPa normal stress. The results show 22%-81% dynamic weakening within 5-12 cm of slip, depending on normal stress and gouge composition. At 20 MPa normal stress, dynamic weakening from peak friction coefficients of 0.4-0.9 to 0.19-0.27 was observed, probably through thermal pressurization. We infer that similar effects play a key role during induced seismic slip on faults in the Groningen and other reservoir systems.

| S-EPMC8243972 | biostudies-literature

Seismic seiche-related oscillations in Lake Biwa, Japan, after the 2011 Tohoku earthquake.

Project description:Seismic seiche-related oscillations caused by Rayleigh waves from large earthquakes are yet to be explored and elucidated comprehensively, then need to accumulate continuously. Herein, we investigated water level fluctuations in Lake Biwa of Japan from surface seiches following the 2011 Tohoku earthquake. Lake Biwa is the largest freshwater resource in Japan, and a small change in its water level can affect local ecosystems. Field observations were conducted during 2010-2012 using a water level gauge with a 1 mm resolution and 2 min data sampling interval. Fast Fourier transform and maximum entropy methods were used for data spectral analysis to distinguish the effects of inherent oscillations on water levels generated by the earthquake. We considered that water level changes were influenced by long-period Rayleigh waves. We observed a wave with a 3.08-3.10 h duration, which was close to the duration determined for the Rayleigh waves (3.08 h). The 3.08-3.10 h wave was caused by forced oscillation of Rayleigh waves characterised by a frequency close to the natural frequency and excited by the earthquake. Overall, our findings suggest that water level fluctuations can be good indicators of high-magnitude earthquakes.

| S-EPMC9652454 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data