Browse
Submit Data
Databases
API
Help

Dataset Information

32 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Unraveling Passivation Mechanism of Imidazolium-Based Ionic Liquids on Inorganic Perovskite to Achieve Near-Record-Efficiency CsPbI₂Br Solar Cells.

ABSTRACT: The application of ionic liquids in perovskite has attracted wide-spread attention for its astounding performance improvement of perovskite solar cells (PSCs). However, the detailed mechanisms behind the improvement remain mysterious. Herein, a series of imidazolium-based ionic liquids (IILs) with different cations and anions is systematically investigated to elucidate the passivation mechanism of IILs on inorganic perovskites. It is found that IILs display the following advantages: (1) They form ionic bonds with Cs⁺ and Pb²⁺ cations on the surface and at the grain boundaries of perovskite films, which could effectively heal/reduce the Cs⁺/I^- vacancies and Pb-related defects; (2) They serve as a bridge between the perovskite and the hole-transport-layer for effective charge extraction and transfer; and (3) They increase the hydrophobicity of the perovskite surface to further improve the stability of the CsPbI₂Br PSCs. The combination of the above effects results in suppressed non-radiative recombination loss in CsPbI₂Br PSCs and an impressive power conversion efficiency of 17.02%. Additionally, the CsPbI₂Br PSCs with IILs surface modification exhibited improved ambient and light illumination stability. Our results provide guidance for an in-depth understanding of the passivation mechanism of IILs in inorganic perovskites.

SUBMITTER: Xu J

PROVIDER: S-EPMC8639893 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Enhanced Efficiency and Stability of All-Inorganic CsPbI2 Br Perovskite Solar Cells by Organic and Ionic Mixed Passivation.

Project description:All-inorganic perovskites have been intensively investigated as potential optoelectronic materials because of their excellent thermal stability, especially for CsPbI2 Br. Herein, the authors studied the effects of mixed passivation utilizing organic phenylethylammonium bromide and inorganic ionic cesium bromide (PEABr + CsBr) on the all-inorganic perovskite (CsPbI2 Br) solar cells for the first time. The treatment with different passivation mechanisms enhances the perovskite film quality, resulting in uniform surface morphology and compact film with low trap density. Besides, the passivation improves the energy level alignment, which benefits the hole extraction at the perovskite/HTL interface and drives the interface electron separation, suppressing the charge recombination and realizing a high open-circuit voltage (Voc ). Finally, the device represents a high power conversion efficiency (PCE) of 16.70%, a Voc of 1.30 V, and an excellent fill factor (FF) of 0.82. The Voc loss and high FF should be among the best values for CsPbI2 Br based devices. Furthermore, the treated devices exhibit remarkable long-term stability with only 8% PCE loss after storing in a glove box for more than 1000 h without encapsulation.

| S-EPMC8425869 | biostudies-literature

Iodine-Optimized Interface for Inorganic CsPbI2Br Perovskite Solar Cell to Attain High Stabilized Efficiency Exceeding 14.

Project description:Recently, inorganic CsPbI2Br perovskite is attracting ever-increasing attention for its outstanding optoelectronic properties and ambient phase stability. Here, an efficient CsPbI2Br perovskite solar cell (PSC) is developed by: 1) using a dimension-grading heterojunction based on a quantum dots (QDs)/bulk film structure, and 2) post-treatment of the CsPbI2Br QDs/film with organic iodine salt to form an ultrathin iodine-ion-enriched perovskite layer on the top of the perovskite film. It is found that the above procedures generate proper band edge bending for improved carrier collection, resulting in effectively decreased recombination loss and improved hole extraction efficiency. Meanwhile, the organic capping layer from the iodine salt also surrounds the QDs and tunes the surface chemistry for further improved charge transport at the interface. As a result, the champion device achieves long-term stabilized power conversion efficiency beyond 14%.

| S-EPMC6299820 | biostudies-literature

Implementing Dopant-Free Hole-Transporting Layers and Metal-Incorporated CsPbI2Br for Stable All-Inorganic Perovskite Solar Cells.

Project description:Mixed-halide CsPbI2Br perovskite is promising for efficient and thermally stable all-inorganic solar cells; however, the use of conventional antisolvent methods and additives-based hole-transporting layers (HTLs) currently hampers progress. Here, we have employed hot-air-assisted perovskite deposition in ambient condition to obtain high-quality photoactive CsPbI2Br perovskite films and have extended stable device operation using metal cation doping and dopant-free hole-transporting materials. Density functional theory calculations are used to study the structural and optoelectronic properties of the CsPbI2Br perovskite when it is doped with metal cations Eu2+ and In3+. We experimentally incorporated Eu2+ and In3+ metal ions into CsPbI2Br films and applied dopant-free copper(I) thiocyanate (CuSCN) and poly(3-hexylthiophene) (P3HT)-based materials as low-cost hole transporting layers, leading to record-high power conversion efficiencies of 15.27% and 15.69%, respectively, and a retention of >95% of the initial efficiency over 1600 h at 85 °C thermal stress.

| S-EPMC8018314 | biostudies-literature

In Situ Iodide Passivation Toward Efficient CsPbI3 Perovskite Quantum Dot Solar Cells.

Project description: Not available

| S-EPMC10310659 | biostudies-literature

An embedded interfacial network stabilizes inorganic CsPbI3 perovskite thin films.

Project description:The black perovskite phase of CsPbI3 is promising for optoelectronic applications; however, it is unstable under ambient conditions, transforming within minutes into an optically inactive yellow phase, a fact that has so far prevented its widespread adoption. Here we use coarse photolithography to embed a PbI2-based interfacial microstructure into otherwise-unstable CsPbI3 perovskite thin films and devices. Films fitted with a tessellating microgrid are rendered resistant to moisture-triggered decay and exhibit enhanced long-term stability of the black phase (beyond 2.5 years in a dry environment), due to increasing the phase transition energy barrier and limiting the spread of potential yellow phase formation to structurally isolated domains of the grid. This stabilizing effect is readily achieved at the device level, where unencapsulated CsPbI3 perovskite photodetectors display ambient-stable operation. These findings provide insights into the nature of phase destabilization in emerging CsPbI3 perovskite devices and demonstrate an effective stabilization procedure which is entirely orthogonal to existing approaches.

| S-EPMC9727127 | biostudies-literature

Low Temperature Fabrication for High Performance Flexible CsPbI2Br Perovskite Solar Cells.

Project description:All-inorganic CsPbX3-based perovskites, such as CsPbI2Br, show much better thermal and illumination stability than their organic-inorganic hybrid counterparts. However, fabrication of high-quality CsPbI2Br perovskite film normally requires annealing at a high temperature (>250 °C) that is not compatible with the plastic substrate. In this work, a Lewis base adduct-promoted growth process that makes it possible to fabricate high quality CsPbI2Br perovskite films at low temperature is promoted. The mechanism is attributed to synthesized dimethyl sulfoxide (DMSO) adducts which allow a low activation energy route to form CsPbI2Br perovskite films during the thermal annealing treatment. A power conversion efficiency (PCE) of 13.54% is achieved. As far as it is known, this is the highest efficiency for the CsPbI2Br solar cells fabricated at low temperature (120 °C). In addition, the method enables fabrication of flexible CsPbI2Br PSCs with PCE as high as 11.73%. Surprisingly, the bare devices without any encapsulation maintain 70% of their original PCEs after being stored in ambient air for 700 h. This work provides an approach for preparing other high performance CsPbX3-based perovskite solar cells (PSCs) at low temperature, particularly for flexible ones.

| S-EPMC6247060 | biostudies-literature

Organic Ligands Armored ZnO Enhances Efficiency and Stability of CsPbI2Br Perovskite Solar Cells.

Project description:Inorganic perovskite solar cells (PSCs) have witnessed great progress in recent years due to their superior thermal stability. As a representative, CsPbI2Br is attracting considerable attention as it can balance the high efficiency of CsPbI3 and the stability of CsPbBr3. However, most research employs doped charge transport materials or applies bilayer transport layers to obtain decent performance, which vastly complicates the fabrication process and scarcely satisfies the commercial production requirement. In this work, all-layer-doping-free inorganic CsPbI2Br PSCs using organic ligands armored ZnO as the electron transport materials achieve an encouraging performance of 16.84%, which is one of the highest efficiencies among published works. Meanwhile, both the ZnO-based CsPbI2Br film and device show superior photostability under continuous white light-emitting diode illumination and improved thermal stability under 85 °C. The remarkable enhanced performance arises from the favorable organic ligands (acetate ions) residue in the ZnO film, which not only can conduce to maintain high crystallinity of perovskite, but also passivate traps at the interface through cesium/acetate interactions, thus suppressing the photo- and thermal- induced perovskite degradation.

| S-EPMC7610334 | biostudies-literature

Bication lead iodide 2D perovskite component to stabilize inorganic α-CsPbI3 perovskite phase for high-efficiency solar cells.

Project description:Among various all-inorganic halide perovskites exhibiting better stability than organic-inorganic halide perovskites, α-CsPbI3 with the most suitable band gap for tandem solar cell application faces an issue of phase instability under ambient conditions. We discovered that a small amount of two-dimensional (2D) EDAPbI4 perovskite containing the ethylenediamine (EDA) cation stabilizes the α-CsPbI3 to avoid the undesirable formation of the nonperovskite δ phase. Moreover, not only the 2D perovskite of EDAPbI4 facilitate the formation of α-CsPbI3 perovskite films exhibiting high phase stability at room temperature for months and at 100°C for >150 hours but also the α-CsPbI3 perovskite solar cells (PSCs) display highly reproducible efficiency of 11.8%, a record for all-inorganic lead halide PSCs. Therefore, using the bication EDA presents a novel and promising strategy to design all-inorganic lead halide PSCs with high performance and reliability.

| S-EPMC5621977 | biostudies-literature

Effective Surface Treatment for High-Performance Inverted CsPbI2Br Perovskite Solar Cells with Efficiency of 15.92.

Project description:HighlightsA simple and multifunctional surface treatment strategy is proposed to address the inferior-performance inverted CsPbI2Br perovskite solar cells (PSCs). The induced-ions exchange can align energy levels, passivate both GBs and surface, and gift the solid protection from external erosions. The inverted CsPbI2Br PSCs reveal a champion efficiency of 15.92% and superior stability after moisture, operational, and thermal ages. Developing high-efficiency and stable inverted CsPbI2Br perovskite solar cells is vitally urgent for their unique advantages of removing adverse dopants and compatible process with tandem cells in comparison with the regular. However, relatively low opening circuit voltage (Voc) and limited moisture stability have lagged their progress far from the regular. Here, we propose an effective surface treatment strategy with high-temperature FABr treatment to address these issues. The induced ions exchange can not only adjust energy level, but also gift effective passivation. Meanwhile, the gradient distribution of FA+ can accelerate the carriers transport to further suppress bulk recombination. Besides, the Br-rich surface and FA+ substitution can isolate moisture erosions. As a result, the optimized devices show champion efficiency of 15.92% with Voc of 1.223 V. In addition, the tolerance of humidity and operation get significant promotion: maintaining 91.7% efficiency after aged at RH 20% ambient condition for 1300 h and 81.8% via maximum power point tracking at 45 °C for 500 h in N2. Furthermore, the unpackaged devices realize the rare reported air operational stability and, respectively, remain almost efficiency (98.9%) after operated under RH 35% for 600 min and 91.2% under RH 50% for 300 min.

| S-EPMC7770732 | biostudies-literature

Atomistic Insights Into the Degradation of Inorganic Halide Perovskite CsPbI3: A Reactive Force Field Molecular Dynamics Study.

Project description:Halide perovskites make efficient solar cells but suffer from several stability issues. The characterization of these degradation processes is challenging because of the limited spatiotemporal resolution in experiments and the absence of efficient computational methods to study these reactive processes. Here, we present the first reactive force field for molecular dynamics simulations of the phase instability and the defect-induced degradation in CsPbI3. We find that the phase transitions are driven by the anharmonic fluctuations of the atoms in the perovskite lattice. At low temperatures, the Cs cations tend to move away from their preferential positions, resulting in worse contacts with the surrounding metal halide framework which initiates the conversion to a nonperovskite phase. Moreover, our simulations of defective structures reveal that, although both iodine vacancies and interstitials are mobile in the perovskite lattice, the vacancies have a detrimental effect on the stability, leading to the decomposition of perovskites to PbI2.

| S-EPMC8215647 | biostudies-literature