Origin Identification of Hungarian Honey Using Melissopalynology, Physicochemical Analysis, and Near Infrared Spectroscopy.
Ontology highlight
ABSTRACT:
SUBMITTER: Bodor Z
PROVIDER: S-EPMC8658813 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Honey is a natural product that is considered globally one of the most widely important foods. Various studies on authenticity detection of honey have been fulfilled using visible and near-infrared (Vis-NIR) spectroscopy techniques. However, there are limited studies on stingless bee honey (SBH) despite the increase of market demand for this food product. The objective of this work was to present the potential of Vis-NIR absorbance spectroscopy for profiling, classifying, and quantifying the adulterated SBH. The SBH sample was mixed with various percentages (10-90%) of adulterants, including distilled water, apple cider vinegar, and high fructose syrup. The results showed that the region at 400-1100 nm that is related to the color and water properties of the samples was effective to discriminate and quantify the adulterated SBH. By applying the principal component analysis (PCA) on adulterants and honey samples, the PCA score plot revealed the classification of the adulterants and adulterated SBHs. A partial least squares regression (PLSR) model was developed to quantify the contamination level in the SBH samples. The general PLSR model with the highest coefficient of determination and lowest root means square error of cross-validation (RCV2=0.96 and RMSECV=5.88 %) was acquired. The aquaphotomics analysis of adulteration in SBH with the three adulterants utilizing the short-wavelength NIR region (800-1100 nm) was presented. The structural changes of SBH due to adulteration were described in terms of the changes in the water molecular matrix, and the aquagrams were used to visualize the results. It was revealed that the integration of NIR spectroscopy with aquaphotomics could be used to detect the water molecular structures in the adulterated SBH.
| S-EPMC9000493 | biostudies-literature
Project description:Jet fuel is the primary fuel used in the aviation industry, and its quality has a direct impact on the safety and operational efficiency of aircraft. The accurate quantitative detection and analysis of various physicochemical property indicators are important for improving and ensuring the quality of jet fuel in the domestic market. This study used near-infrared (NIR) spectroscopy to establish a suitable model for the simultaneous and rapid detection of multiple physicochemical properties in jet fuel. Using more than 40 different sources of jet fuel, a rapid detection model was established by optimizing the spectral processing methods. The measurement models were separately built using the partial least-squares (PLS) and orthogonal PLS algorithms, and the model parameters were optimized. The results show that after the Savitzky-Golay second derivative preprocessing, the PLS model built using the feature spectra selected by the uninformative variable elimination wavelength algorithm achieved the best measurement performance. Compared with the PLS model without preprocessing, the range of the resulting accuracy improvement was at least 15.01%. Under the optimal model parameters, the calibration set regression coefficient (Rc2) of the 11 jet fuel property index models ranged from 0.9102 to 0.9763, with the root-mean-square error of calibration values up to 0.8468 °C (for flash points). The regression coefficient (Rp2) of the validation set ranged from 0.8239 to 0.9557, with the root-mean-square error of prediction values up to 1.1354 °C (for flash points). The ratios of prediction to deviation (RPD) values were all in the range of 1.9-3.0, indicating high accuracy and reliability of the model. The rapid NIR analysis method established in this study enables the simultaneous and rapid detection of multiple physicochemical properties of jet fuel, thereby providing effective technical support for ensuring the quality of jet fuel in the market.
| S-EPMC11007685 | biostudies-literature
Project description:Most drugs are no longer produced in their own countries by the pharmaceutical companies, but by contract manufacturers or at manufacturing sites in countries that can produce more cheaply. This not only makes it difficult to trace them back but also leaves room for criminal organizations to fake them unnoticed. For these reasons, it is becoming increasingly difficult to determine the exact origin of drugs. The goal of this work was to investigate how exactly this is possible by using different spectroscopic methods like nuclear magnetic resonance and near- and mid-infrared spectroscopy in combination with multivariate data analysis. As an example, 56 out of 64 different paracetamol preparations, collected from 19 countries around the world, were chosen to investigate whether it is possible to determine the pharmaceutical company, manufacturing site, or country of origin. By means of suitable pre-processing of the spectra and the different information contained in each method, principal component analysis was able to evaluate manufacturing relationships between individual companies and to differentiate between production sites or formulations. Linear discriminant analysis showed different results depending on the spectral method and purpose. For all spectroscopic methods, it was found that the classification of the preparations to their manufacturer achieves better results than the classification to their pharmaceutical company. The best results were obtained with nuclear magnetic resonance and near-infrared data, with 94.6%/99.6% and 98.7/100% of the spectra of the preparations correctly assigned to their pharmaceutical company or manufacturer.
| S-EPMC8043955 | biostudies-literature
Project description:Near-infrared spectroscopy (NiRS) is a relatively new technology of brain imaging with its potential in the assessment of cerebrovascular health only recently discovered. Encouraging early results suggest that NiRS can be used as an inexpensive and portable cerebrovascular health tracking device using a recently proposed pulse relaxation function (PReFx). In this paper, we propose a new NiRS timing index, [Formula: see text], of cerebrovascular health. [Formula: see text] is a novel use of the NiRS technology. [Formula: see text] is motivated by the previously proved relationship of the timing of the reflected wave with vascular resistance and compliance in the context of pressure waveforms. We correlated both [Formula: see text] and PReFx against age, a non-exercise cardiorespiratory fitness (CRF) index, and two existing indices of cerebrovascular health, namely transcranial Doppler (TCD) augmentation index, [Formula: see text], and magnetic resonance imaging (MRI) blood flow pulsatility index, [Formula: see text]. The [Formula: see text] correlations with Age, CRF, [Formula: see text] and [Formula: see text] all are significant, i.e., [Formula: see text] ([Formula: see text]), [Formula: see text] ([Formula: see text]), [Formula: see text] ([Formula: see text]) and [Formula: see text] ([Formula: see text]), respectively. PReFx, however, did not have significant correlations with any of the vascular health factors. The proposed timing index is a reliable indicator of cerebrovascular aging factors in the NiRS waveform.
| S-EPMC8292377 | biostudies-literature
Project description:Honey from different botanical sources presents a great variability in chemical composition, physical properties, and sensorial attributes. The association between honey qualities and its geographical origin allows the recognition of honey, and beekeepers are economically benefited. The objective of this study was to evaluate the physicochemical characteristics of honey produced in Ortigueira, Brazil and to compare it with the honey produced in the neighboring localities for the request of geographical indication certification. In the 112 honey samples collected between 2010 and 2013 from Ortigueira and the neighboring localities, moisture acidity, pH, hydroxymethyl furfural (HMF), diastase activity (DA), sugars, proline (Pro), electrical conductivity (EC), color absorbance at 635 nm (C635), and Cielab color parameters were evaluated. HMF, reducing sugars (RS), total sugars (TS), proline, and color parameters (L*, a* and b*) were significantly different in Ortigueira 2010 honey seasons. Principal component analysis separated assapeixe (Vernonia sp) and capixingui (Croton floribundus) honeys from wild honeys (polyfloral). In addition, HMF, RS, L*, and lactonic acidity values promoted the separation between assapeixe and capixingui honeys. Ortigueira honey differs significantly from honeys from neighboring locality in pH, proline, HMF, DA, EC, RS, sucrose, TS, free and total acidity, and color parameters (C635, L*, a*, b*). The multivariate analysis applied to variables was efficient to discriminate honeys from different botanical sources and different locals, and is recommended for studies on the geographical indication of honey.
| S-EPMC7171034 | biostudies-literature
Project description:The prices of walnuts vary according to their geographical origin and, therefore, offer a financial incentive for adulteration. A reliable analysis method is required to quickly detect possible misdeclarations and thus prevent food fraud. In this study, a method to distinguish between seven geographical origins of walnuts using Fourier transform near-infrared (FT-NIR) spectroscopy combined with chemometrics as a fast, versatile, and easy to handle analytical tool was developed. NIR spectra of 212 ground and afterwards freeze-dried walnut samples, harvested in three consecutive years (2017-2019), were collected. We optimized the data pre-processing by applying and evaluating 50,545 different pre-processing combinations, followed by linear discriminant analysis (LDA) which was confirmed by nested cross-validation. The results show that in the scope of our research minimal pre-processing led to the best results: By applying just multiplicative scatter correction (MSC) and median centering, a classification accuracy of 77.00% ± 1.60% was achieved. Consequently, this complex model can be used to answer economically relevant questions e.g., to distinguish between European and Chinese walnuts. Furthermore, the great influence of the applied pre-processing methods, e.g., the selected wavenumber range, on the achieved classification accuracy is shown which underlines the importance of optimization of the pre-processing strategy.
| S-EPMC7764259 | biostudies-literature
Project description: Not available
| S-EPMC10790886 | biostudies-literature
Project description:Near-infrared (NIR) spectroscopy is a high-throughput method to analyze the near-infrared region of the electromagnetic spectrum. It detects the absorption of light by molecular bonds and can be used with live insects. In this study, we investigate the accuracy of NIR spectroscopy in determining triglyceride level and species of wild-caught Drosophila. We employ the chemometric approach to produce a multivariate calibration model. The multivariate calibration model is the mathematical relationship between the changes in NIR spectra and the property of interest as determined by the reference analytical method. Once the calibration model was developed, we used an independent set to validate the accuracy of the calibration model. The optimized calibration model for triglyceride quantification yielded coefficients of determination of 0.73 for the calibration test set and 0.70 for the independent test set. Simultaneously, we used NIR spectroscopy to discriminate two species of Drosophila. Flies from independent sets were correctly classified into Drosophila melanogaster and Drosophila simulans with accuracy higher than 80%. These results suggest that NIRS has the potential to be used as a high-throughput screening method to assess a live individual insect's triglyceride level and taxonomic status.
| S-EPMC6374719 | biostudies-literature
Project description:The activities of enzymes are the basis of evaluating the quality of honey. Beekeepers usually use concentrators to process natural honey into concentrated honey by concentrating it under high temperatures. Active enzymes are very sensitive to high temperatures and will lose their activity when they exceed a certain temperature. The objective of this work is to study the kinetic mechanism of the temperature effect on diastase activity and to develop a nondestructive approach for quick determination of the diastase activity of honey through a heating process based on visible and near-infrared (Vis/NIR) spectroscopy. A total of 110 samples, including three species of botanical origin, were used for this study. To explore the kinetic mechanism of diastase activity under high temperatures, the honey of three kinds of botanical origins were processed with thermal treatment to obtain a variety of diastase activity. Diastase activity represented with diastase number (DN) was measured according to the national standard method. The results showed that the diastase activity decreased with the increase of temperature and heating time, and the sensitivity of acacia and longan to temperature was higher than linen. The optimum temperature for production and processing is 60 °C. Unsupervised clustering analysis was adopted to detect spectral characteristics of these honeys, indicating that different botanical origins of honeys can be distinguished in principal component spaces. Partial least squares (PLS) and least squares-support vector machine (LS-SVM) algorithms were applied to develop quantitative relationships between Vis/NIR spectroscopy and diastase activity. The best result was obtained through Gaussian filter smoothing-standard normal variate (GF-SNV) pretreatment and the LS-SVM model, known as GF-SNV-LS-SVM, with a determination coefficient (R²) of prediction of 0.8872, and root mean square error (RMSE) of prediction of 0.2129. The overall results of this paper showed that the diastase activity of honey can be determined quickly and non-destructively with Vis/NIR spectral methods, which can be used to detect DN in the process of honey production and processing, and to maximize the nutrient content of honey.
| S-EPMC6480106 | biostudies-literature
Project description:Counterfeit medicines represent a global public health threat warranting the development of accurate, rapid, and nondestructive methods for their identification. Portable near-infrared (NIR) spectroscopy offers this advantage. This work sheds light on the potential of combining NIR spectroscopy with principal component analysis (PCA) and soft independent modelling of class analogy (SIMCA) for authenticating branded and generic antibiotics. A total of 23 antibiotics were measured "nondestructively" using a portable NIR spectrometer. The antibiotics corresponded to six different active pharmaceutical ingredients being: amoxicillin trihydrate and clavulanic acid, azithromycin dihydrate, ciprofloxacin hydrochloride, doxycycline hydrochloride, and ofloxacin. NIR spectra were exported into Matlab R2018b where data analysis was applied. The results showed that the NIR spectra of the medicines showed characteristic features that corresponded to the main excipient(s). When combined with PCA, NIR spectroscopy could distinguish between branded and generic medicines and could classify medicines according to their manufacturing sources. The PCA scores showed the distinct clusters corresponding to each group of antibiotics, whereas the loadings indicated which spectral features were significant. SIMCA provided more accurate classification over PCA for all antibiotics except ciprofloxacin which products shared many overlapping excipients. In summary, the findings of the study demonstrated the feasibility of portable NIR as an initial method for screening antibiotics.
| S-EPMC8645310 | biostudies-literature