Dataset Information

Impact of COVID19 restrictions on organic micropollutants in wastewater treatment plants and human consumption rates.

ABSTRACT: COVID19 pandemic and the consequent restrictions to constrain SARS-CoV-2 spreading produced several impacts on the worldwide population. The present study focused on 10 Organic Micropollutants (illicit drugs, pharmaceuticals including some antibiotics and caffeine) and aimed to assess: (1) if COVID19 pandemic restrictions affected the load of those contaminants released into the sewage network and consequently the removal achieved by the Wastewater Treatment Plants; (2) if pursuant to the COVID19 pandemic, there was a change in population consumption rates of the same compounds through the wastewater-based epidemiology (WBE) approach. Two full-scale wastewater treatment plants (WWTPs) located in Central Italy were chosen as case studies, which are distinguished by different characteristics of the catchment area and water treatment layouts. The study was based on a 2-years monitoring activity of the concentration of the above organic micropollutants, traditional water quality parameters (COD, TSS, nitrogen compounds, total phosphorous) and flow rate in the influent and effluent. The statistical analysis of the monitoring data showed an increase of the influent load of most of the organic micropollutants. A decrease from 22% to -18% of the median removal efficiency was observed for carbamazepine in the WWTP with the lower treatment capacity only. The other compounds were removed roughly at the same rate. The application of the WBE approach demonstrated an increase in the consumption rate of cocaine, trimethoprim, sulfamethoxazole, sulfadiazine, carbamazepine and above all caffeine during the COVID19 restrictions period. These results highlight that COVID19 pandemic affected people's lifestyle and habits also as far as drugs consumption is concerned, which in turn might have an impact on the treatment efficacy of plants and finally on the receiving water body quality. Therefore, it is mandatory to keep monitoring to improve knowledge and eventually to implement the required measures to address this new problem.

SUBMITTER: Di Marcantonio C

PROVIDER: S-EPMC8668233 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Similar Datasets

Project description:Biochar adsorbent can be produced in low-resource settings using local materials and simple pyrolysis technology, and it has shown promise for uptake of micropollutants (MPs) such as pesticides, pharmaceuticals, industrial compounds, and chemicals released from consumer goods present in water at ng/L to μg/L levels. Accordingly, the use of biochar in water treatment applications where granular activated carbon (GAC) is economically or logistically infeasible is gaining interest. Monitoring treatment systems for individual MPs require laboratory analytical techniques that are typically cost-prohibitive and impractical for low-resource settings. Therefore, identification of surrogate parameters(s) for adsorbent bed life that can be measured inexpensively and in the field is a high priority. Background dissolved organic matter (DOM) is ubiquitous in natural and anthropogenic waters at concentrations typically 1,000 to 100,000 that of MPs. Some constituents of DOM foul the adsorbent and reduce bed life for removal of target contaminants. Aromatic DOM foulants absorb ultraviolet light at a wavelength of 254 nm (UVA254). Because DOM fouling directly affects MP adsorption capacity and DOM is a bulk water parameter that can be quantified using relatively inexpensive and portable instruments, it could be exploited as a surrogate for monitoring biochar adsorber bed life under field conditions. The objective of this study was to quantify removal of MPs from waters containing different types and concentrations of background DOM (surface water, wastewater, dump leachate) and thus exhibiting different UVA254 breakthrough profiles in bench-scale column experiments. Breakthrough profiles of weakly to moderately adsorbing MPs, including herbicides, pharmaceuticals and personal care products, and perfluoroalkyl acids, were collected using biochars generated under different pyrolysis conditions and a commercial GAC as a performance benchmark. Optimal conditions for biochar water treatment include using biochar produced from wood at ≥850°C under slightly aerobic conditions, empty bed contact times of ≥30 min, and upstream treatment processes to reduce DOM. Relative UVA254 breakthrough (C/C 0) up to 0.6-0.9 corresponded to ≥90% MP removal for most MP-water combinations studied.

Project description:It is assumed that microbial communities involved in the biological treatment of different wastewaters having a different chemical composition harbor different microbial populations which are specifically adapted to the environmental stresses encountered in these systems. Yet, little is known about the composition of these microbial communities. Therefore, the aim of this study was to assess the microbial community composition over two seasons (winter and summer) in activated sludge from well-operating textile wastewater treatment plants (WWTPs) in comparison with municipal WWTPs, and to explain observed differences by environmental variables. 454-pyrosequencing generated 160 archaeal and 1645 bacterial species-level Operational Taxonomic Units (OTUs), with lower observed richness in activated sludge from textile WWTPs compared to municipal WWTPs. The bacterial phyla Planctomycetes, Chloroflexi, Chlorobi, and Acidobacteria were more abundant in activated sludge samples from textile WWTPs, together with archaeal members of Thaumarchaeota. Nonmetric multidimensional scaling analysis of the microbial communities showed that microbial communities from textile and municipal WWTPs were significantly different, with a seasonal effect on archaea. Nitrifying and denitrifying bacteria as well as phosphate-accumulation bacteria were more abundant in municipal WWTPs, while sulfate-reducing bacteria were almost only detected in textile WWTPs. Additionally, microbial communities from textile WWTPs were more dissimilar than those of municipal WWTPs, possibly due to a wider diversity in environmental stresses to which microbial communities in textile WWTPs are subjected to. High salinity, high organic loads, and a higher water temperature were important potential variables driving the microbial community composition in textile WWTPs. This study provides a general view on the composition of microbial communities in activated sludge of textile WWTPs, and may provide novel insights for identifying key players performing important functions in the purification of textile wastewaters.

Dataset Information

Impact of COVID19 restrictions on organic micropollutants in wastewater treatment plants and human consumption rates.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets