Browse
Submit Data
Databases
API
Help

Dataset Information

16 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Low-power-consumption CMOS inverter array based on CVD-grown p-MoTe2 and n-MoS2.

ABSTRACT: Two-dimensional (2D) semi-conductive transition metal dichalcogenides (TMDCs) have shown advantages for logic application. Complementary metal-oxide-semiconductor (CMOS) inverter is an important component in integrated circuits in view of low power consumption. So far, the performance of the reported TMDCs-based CMOS inverters is not satisfactory. Besides, most of the inverters were made of mechanically exfoliated materials, which hinders their reproducible production and large-scale integration in practical application. In this study, we demonstrate a practical approach to fabricate CMOS inverter arrays using large-area p-MoTe2 and n-MoS2, which are grown via chemical vapor deposition method. The current characteristics of the channel materials are balanced by atomic layer depositing Al2O3. Complete logic swing and clear dynamic switching behavior are observed in the inverters. Especially, ultra-low power consumption of ∼0.37 nW is achieved. Our work paves the way for the application of 2D TMDCs materials in large-scale low-power-consumption logic circuits.

SUBMITTER: Du W

PROVIDER: S-EPMC8668989 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

CVD-grown monolayer MoS2 in bioabsorbable electronics and biosensors.

Project description:Transient electronics represents an emerging technology whose defining feature is an ability to dissolve, disintegrate or otherwise physically disappear in a controlled manner. Envisioned applications include resorbable/degradable biomedical implants, hardware-secure memory devices, and zero-impact environmental sensors. 2D materials may have essential roles in these systems due to their unique mechanical, thermal, electrical, and optical properties. Here, we study the bioabsorption of CVD-grown monolayer MoS2, including long-term cytotoxicity and immunological biocompatibility evaluations in biofluids and tissues of live animal models. The results show that MoS2 undergoes hydrolysis slowly in aqueous solutions without adverse biological effects. We also present a class of MoS2-based bioabsorbable and multi-functional sensor for intracranial monitoring of pressure, temperature, strain, and motion in animal models. Such technology offers specific, clinically relevant roles in diagnostic/therapeutic functions during recovery from traumatic brain injury. Our findings support the broader use of 2D materials in transient electronics and qualitatively expand the design options in other areas.

| S-EPMC5924366 | biostudies-literature

Engineering surface state density of monolayer CVD grown 2D MoS2 for enhanced photodetector performance.

Project description:This study demonstrates the effect of nitrogen doping on the surface state densities (Nss) of monolayer MoS2 and its effect on the responsivity and the response time of the photodetector. Our experimental results shows that by doping monolayer MoS2 by nitrogen, the surface state (Nss) increases thereby increasing responsivity. The mathematical model included in the paper supports the relation of photocurrent gain and its dependency on trap level which states that the increasing the trap density increases the photocurrent gain and the same is observed experimentally. The experimental results at room temperature revealed that nitrogen doped MoS2 have a high NSS of 1.63 X 1013 states/m2/eV compared to undoped MoS2 of 4.2 x 1012 states/m2/eV. The increase in Nss in turn is the cause for rise in trap states which eventually increases the value of photo responsivity from 65.12 A/W (undoped MoS2) to 606.3 A/W (nitrogen doped MoS2). The response time calculated for undoped MoS2 was 0.85 sec and for doped MoS2 was 0.35 sec. Finally, to verify the dependence of surface states on the responsivity, the surface states were varied by varying temperature and it was observed that upon increment in temperature, the surface states decreases which causes the responsivity values also to decrease.

| S-EPMC11006120 | biostudies-literature

A Low-Power CMOS Microfluidic Pump Based on Travelling-Wave Electroosmosis for Diluted Serum Pumping.

Project description:Microfluidic pump is an essential component in lab-on-chip applications. It is of importance to develop an active microfluidic pump with low-power and low-cost characteristics for portable and miniaturized diagnostic systems. Taking advantages of CMOS technologies, in this work, we report a low-power microfluidic pump based on travelling-wave electroosmosis (TWEO). Utilizing an integrated driving circuit, this monolithic CMOS microfluidic pump can be operated at 1.5 V driving voltage with a power consumption of 1.74 mW. The integrated driving circuit consist of a resistor-capacitor (RC) oscillator, a 90-degrees phase-shift square wave generator, and buffer amplifiers. Moreover, capabilities of the developed CMOS TWEO pump to drive diluted human serum are characterized. The flow rate of diluted human serum with dilution ratio of 1:1000 can achieve 51 μm/s. This is the first time demonstrating an in-situ CMOS-based microfluidic pump to drive the clinical diluted serum sample. As a consequence, this work demonstrates an essential component of CMOS biotechnologies for potential applications of portable in vitro diagnosis (IVD) systems.

| S-EPMC6794323 | biostudies-literature

Low Power, CMOS-MoS<sub>2</sub> Memtransistor based Neuromorphic Hybrid Architecture for Wake-Up Systems.

Project description:Neuromorphic architectures have become essential building blocks for next-generation computational systems, where intelligence is embedded directly onto low power, small area, and computationally efficient hardware devices. In such devices, realization of neural algorithms requires storage of weights in digital memories, which is a bottleneck in terms of power and area. We hereby propose a biologically inspired low power, hybrid architectural framework for wake-up systems. This architecture utilizes our novel high-performance, ultra-low power molybdenum disulphide (MoS2) based two-dimensional synaptic memtransistor as an analogue memory. Furthermore, it exploits random device mismatches to implement the population coding scheme. Power consumption per CMOS neuron block was found to be 3 nw in the 65?nm process technology, while the energy consumption per cycle was 0.3 pJ for potentiation and 20 pJ for depression cycles of the synaptic device. The proposed framework was demonstrated for classification and regression tasks, using both off-chip and simplified on-chip sign-based learning techniques.

| S-EPMC6821695 | biostudies-literature

Heterojunction hybrid devices from vapor phase grown MoS2.

Project description:We investigate a vertically-stacked hybrid photodiode consisting of a thin n-type molybdenum disulfide (MoS2) layer transferred onto p-type silicon. The fabrication is scalable as the MoS2 is grown by a controlled and tunable vapor phase sulfurization process. The obtained large-scale p-n heterojunction diodes exhibit notable photoconductivity which can be tuned by modifying the thickness of the MoS2 layer. The diodes have a broad spectral response due to direct and indirect band transitions of the nanoscale MoS2. Further, we observe a blue-shift of the spectral response into the visible range. The results are a significant step towards scalable fabrication of vertical devices from two-dimensional materials and constitute a new paradigm for materials engineering.

| S-EPMC4074969 | biostudies-literature

Prediction of entropy stabilized incommensurate phases in the system MoS2 -MoTe2.

Project description:A first principles phase diagram calculation, that included van der Waals interactions, was performed for the 3D bulk system (1 - X) · MoS2 - (X) · MoTe2. Surprisingly, the predicted phase diagram has at least two ordered phases, at X ? 0:46, even though all calculated formation energies are positive; in a ground-state analysis that examined all configurations with 16 or fewer anion sites. The lower-temperature I-phase is predicted to transform to a higher-temperature I'-phase at T ? 500 K, and I' disorders at T ? 730 K. Both these transitions are predicted to be first-order, and there are broad two-phase fields on both sides of the ordered regions. Both the I- and I'-phases are predicted to be incommensurate, i.e., aperiodic: I-phase in three dimensions; and I'-phase in two dimensions.

| S-EPMC5531295 | biostudies-other

Monolayer Single-Crystal 1T'-MoTe2 Grown by Chemical Vapor Deposition Exhibits Weak Antilocalization Effect.

Project description:Growth of transition metal dichalcogenide (TMD) monolayers is of interest due to their unique electrical and optical properties. Films in the 2H and 1T phases have been widely studied but monolayers of some 1T'-TMDs are predicted to be large-gap quantum spin Hall insulators, suitable for innovative transistor structures that can be switched via a topological phase transition rather than conventional carrier depletion [ Qian et al. Science 2014 , 346 , 1344 - 1347 ]. Here we detail a reproducible method for chemical vapor deposition of monolayer, single-crystal flakes of 1T'-MoTe2. Atomic force microscopy, Raman spectroscopy, X-ray photoelectron spectroscopy, and transmission electron microscopy confirm the composition and structure of MoTe2 flakes. Variable temperature magnetotransport shows weak antilocalization at low temperatures, an effect seen in topological insulators and evidence of strong spin-orbit coupling. Our approach provides a pathway to systematic investigation of monolayer, single-crystal 1T'-MoTe2 and implementation in next-generation nanoelectronic devices.

| S-EPMC5893939 | biostudies-literature

CMOS-compatible ferroelectric NAND flash memory for high-density, low-power, and high-speed three-dimensional memory.

Project description:Ferroelectric memory has been substantially researched for several decades as its potential to obtain higher speed, lower power consumption, and longer endurance compared to conventional flash memory. Despite great deal of effort to develop ferroelectric memory based on perovskite oxides on Si, formation of unwanted interfacial layer substantially compromises the performance of the ferroelectric memory. Furthermore, three-dimensional (3D) integration has been unimaginable because of high processing temperature, non-CMOS compatibility, difficulty in scaling, and complex compositions of perovskite oxides. Here, we demonstrate a unique strategy to tackle critical issues by applying hafnia-based ferroelectrics and oxide semiconductors. Thus, it is possible to avoid the formation of interfacial layer that finally allows unprecedented Si-free 3D integration of ferroelectric memory. This strategy yields memory performance that could be achieved neither by the conventional flash memory nor by the previous perovskite ferroelectric memories. Device simulation confirms that this strategy can realize ultrahigh-density 3D memory integration.

| S-EPMC7806215 | biostudies-literature

Broadband photodetection using one-step CVD-fabricated MoS2/MoO2 microflower/microfiber heterostructures.

Project description:Molybdenum disulfide (MoS2) has been combined so far with other photodetecting semiconductors as an enhancing agent owing to its optical and electronic properties. Existing approaches demonstrated MoS2-incorporated photodetector devices using complex and costly fabrication processes. Here, we report on simplified one-step on the chemical vapor deposition (CVD) based synthesis of a unique microfiber/microflower MoS2-based heterostructure formed by capturing MoO2 intermediate material during the CVD process. This particular morphology engenders a material chemical and electronic interplay exalting the heterostructure absorption up to ~ 98% over a large spectral range between 200 and 1500 nm. An arsenal of characterization methods were used to elucidate the properties of these novel heterostructures including Raman spectroscopy, X-ray diffraction, X-ray photoelectron spectrometry, high-resolution transmission and scanning electron microscopies, and Kelvin probe force microscopy. Our findings revealed that the MoS2 and the MoO2 crystallize in the hexagonal and monoclinic lattices, respectively. The integration of the MoS2/MoO2 heterostructures into functional photodetectors revealed a strong photoresponse under both standard sun illumination AM1.5G and blue light excitation at 450 nm. Responsivity and detectivity values as high as 0.75 mA W-1 and 1.45 × 107 Jones, respectively, were obtained with the lowest light intensity of 20 mW cm-2 at only 1 V bias. These results demonstrate the high performances achieved by the unique MoS2/MoO2 heterostructure for broadband light harvesting and pave the way for their adoption in photodetection applications.

| S-EPMC9772214 | biostudies-literature

Large-Scale MoS2 Pixel Array for Imaging Sensor.

Project description:Two-dimensional molybdenum disulfide (MoS2) has been extensively investigated in the field of optoelectronic devices. However, most reported MoS2 phototransistors are fabricated using the mechanical exfoliation method to obtain micro-scale MoS2 flakes, which is laboratory- feasible but not practical for the future industrial fabrication of large-scale pixel arrays. Recently, wafer-scale MoS2 growth has been rapidly developed, but few results of uniform large-scale photoelectric devices were reported. Here, we designed a 12 × 12 pixels pixel array image sensor fabricated on a 2 cm × 2 cm monolayer MoS2 film grown by chemical vapor deposition (CVD). The photogating effect induced by the formation of trap states ensures a high photoresponsivity of 364 AW-1, which is considerably superior to traditional CMOS sensors (≈0.1 AW-1). Experimental results also show highly uniform photoelectric properties in this array. Finally, the concatenated image obtained by laser lighting stencil and photolithography mask demonstrates the promising potential of 2D MoS2 for future optoelectrical applications.

| S-EPMC9739261 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data