Browse
Submit Data
Databases
API
Help

Dataset Information

30 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Wafer-Scale Synthesis of WS₂ Films with In Situ Controllable p-Type Doping by Atomic Layer Deposition.

ABSTRACT: Wafer-scale synthesis of p-type TMD films is critical for its commercialization in next-generation electro/optoelectronics. In this work, wafer-scale intrinsic n-type WS₂ films and in situ Nb-doped p-type WS₂ films were synthesized through atomic layer deposition (ALD) on 8-inch α-Al₂O₃/Si wafers, 2-inch sapphire, and 1 cm² GaN substrate pieces. The Nb doping concentration was precisely controlled by altering cycle number of Nb precursor and activated by postannealing. WS₂ n-FETs and Nb-doped p-FETs with different Nb concentrations have been fabricated using CMOS-compatible processes. X-ray photoelectron spectroscopy, Raman spectroscopy, and Hall measurements confirmed the effective substitutional doping with Nb. The on/off ratio and electron mobility of WS₂ n-FET are as high as 10⁵ and 6.85 cm² V^-1 s^-1, respectively. In WS₂ p-FET with 15-cycle Nb doping, the on/off ratio and hole mobility are 10 and 0.016 cm² V^-1 s^-1, respectively. The p-n structure based on n- and p- type WS₂ films was proved with a 10⁴ rectifying ratio. The realization of controllable in situ Nb-doped WS₂ films paved a way for fabricating wafer-scale complementary WS₂ FETs.

SUBMITTER: Yang H

PROVIDER: S-EPMC8672204 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Atomic Layer Deposition of Photoconductive Cu2O Thin Films.

Project description:Herein, we report an atomic layer deposition (ALD) process for Cu2O thin films using copper(II) acetate [Cu(OAc)2] and water vapor as precursors. This precursor combination enables the deposition of phase-pure, polycrystalline, and impurity-free Cu2O thin films at temperatures of 180-220 °C. The deposition of Cu(I) oxide films from a Cu(II) precursor without the use of a reducing agent is explained by the thermally induced reduction of Cu(OAc)2 to the volatile copper(I) acetate, CuOAc. In addition to the optimization of ALD process parameters and characterization of film properties, we studied the Cu2O films in the fabrication of photoconductor devices. Our proof-of-concept devices show that approximately 20 nm thick Cu2O films can be used for photodetection in the visible wavelength range and that the thin film photoconductors exhibit improved device characteristics in comparison to bulk Cu2O crystals.

| S-EPMC6648912 | biostudies-literature

CO2-based atomic/molecular layer deposition of lithium ethylene carbonate thin films.

Project description:When a conventional lithium-ion battery (LIB) is cycled, a solid electrolyte interphase (SEI) forms on the surface of a negative electrode, passivating it but also depleting the capacity of the battery. Most commercial LIBs utilize a carbonate-based electrolyte, which at least temporarily leads to the formation of lithium alkyl carbonates (ROCO2Li) as the main organic SEI component. Here, we pioneer the use of atomic/molecular layer deposition (ALD/MLD) for the fabrication of lithium ethyl glycoxide (LiEG) and lithium ethylene carbonate (LiEGCO) thin films, to mimic the lithium alkyl carbonate component of the SEI. For the in situ growth of LiEGCO, we employ for the first time CO2 as an ALD/MLD precursor. The films are characterized using XRR, GIXRD, FTIR, AFM and SEM.

| S-EPMC9417553 | biostudies-literature

Yttrium Doping Effects on Ferroelectricity and Electric Properties of As-Deposited Hf1-xZrxO2 Thin Films via Atomic Layer Deposition.

Project description:Hf1-xZrxO2 (HZO) thin films are versatile materials suitable for advanced ferroelectric semiconductor devices. Previous studies have shown that the ferroelectricity of HZO thin films can be stabilized by doping them with group III elements at low concentrations. While doping with Y improves the ferroelectric properties, there has been limited research on Y-HZO thin films fabricated using atomic layer deposition (ALD). In this study, we investigated the effects of Y-doping cycles on the ferroelectric and electrical properties of as-deposited Y-HZO thin films with varying compositions fabricated through ALD. The Y-HZO thin films were stably crystallized without the need for post-thermal treatment and exhibited transition behavior depending on the Y-doping cycle and initial composition ratio of the HZO thin films. These Y-HZO thin films offer several advantages, including enhanced dielectric constant, leakage current density, and improved endurance. Moreover, the optimized Y-doping cycle induced a phase transformation that resulted in Y-HZO thin films with improved ferroelectric properties, exhibiting stable behavior without fatigue for up to 1010 cycles. These as-deposited Y-HZO thin films show promise for applications in semiconductor devices that require high ferroelectric properties, excellent electrical properties, and reliable performance with a low thermal budget.

| S-EPMC10421259 | biostudies-literature

Edge-Site Nanoengineering of WS2 by Low-Temperature Plasma-Enhanced Atomic Layer Deposition for Electrocatalytic Hydrogen Evolution.

Project description:Edge-enriched transition metal dichalcogenides, such as WS2, are promising electrocatalysts for sustainable production of H2 through the electrochemical hydrogen evolution reaction (HER). The reliable and controlled growth of such edge-enriched electrocatalysts at low temperatures has, however, remained elusive. In this work, we demonstrate how plasma-enhanced atomic layer deposition (PEALD) can be used as a new approach to nanoengineer and enhance the HER performance of WS2 by maximizing the density of reactive edge sites at a low temperature of 300 °C. By altering the plasma gas composition from H2S to H2 + H2S during PEALD, we could precisely control the morphology and composition and, consequently, the edge-site density as well as chemistry in our WS2 films. The precise control over edge-site density was verified by evaluating the number of exposed edge sites using electrochemical copper underpotential depositions. Subsequently, we demonstrate the HER performance of the edge-enriched WS2 electrocatalyst, and a clear correlation among plasma conditions, edge-site density, and the HER performance is obtained. Additionally, using density functional theory calculations we provide insights and explain how the addition of H2 to the H2S plasma impacts the PEALD growth behavior and, consequently, the material properties, when compared to only H2S plasma.

| S-EPMC6662884 | biostudies-literature

Redox Properties of TiO2 Thin Films Grown on Mesoporous Silica by Atomic Layer Deposition.

Project description:The redox properties of titania films grown by ALD on SBA-15, a silica-based mesoporous material, were characterized as a function of thickness (that is, the number of ALD cycles used). 29Si CP/MAS NMR helped to identify the nature of the surface species that form in the initial stages of deposition, and infrared absorption spectroscopy was used to follow the transition from silica to titania surfaces. The reducibility of the titania sites by CO and H2 was studied ex situ using EPR and in situ with ambient-pressure XPS. It was determined that the titania ALD films are amorphous and easier to reduce than crystalline titania and that the reduction is reversible. A transition in the nature of the surface was also observed, with unique mixed Si-O-Ti sites forming during the first few ALD cycles and a more typical titania surface progressively developing as the film grows in thickness.

| S-EPMC10226118 | biostudies-literature

Low-temperature atomic layer epitaxy of AlN ultrathin films by layer-by-layer, in-situ atomic layer annealing.

Project description:Low-temperature epitaxial growth of AlN ultrathin films was realized by atomic layer deposition (ALD) together with the layer-by-layer, in-situ atomic layer annealing (ALA), instead of a high growth temperature which is needed in conventional epitaxial growth techniques. By applying the ALA with the Ar plasma treatment in each ALD cycle, the AlN thin film was converted dramatically from the amorphous phase to a single-crystalline epitaxial layer, at a low deposition temperature of 300 °C. The energy transferred from plasma not only provides the crystallization energy but also enhances the migration of adatoms and the removal of ligands, which significantly improve the crystallinity of the epitaxial layer. The X-ray diffraction reveals that the full width at half-maximum of the AlN (0002) rocking curve is only 144 arcsec in the AlN ultrathin epilayer with a thickness of only a few tens of nm. The high-resolution transmission electron microscopy also indicates the high-quality single-crystal hexagonal phase of the AlN epitaxial layer on the sapphire substrate. The result opens a window for further extension of the ALD applications from amorphous thin films to the high-quality low-temperature atomic layer epitaxy, which can be exploited in a variety of fields and applications in the near future.

| S-EPMC5206640 | biostudies-literature

HfS2 thin films deposited at room temperature by an emerging technique, solution atomic layer deposition.

Project description:As a member of the two-dimensional metal dichalcogenide family, HfS2 has emerged as a promising material for various optoelectronic applications. Atomic layer deposition is widely used in microelectronics manufacturing with unique properties in terms of accurate thickness control and high conformality. In this work, a simple and versatile method based on the atomic layer deposition principles is presented to generate hafnium disulfide from the solution phase ('solution ALD' or sALD). For ease of comparison with the traditional gaseous atomic layer deposition (gALD) method, the same precursors are used, namely tetrakis-(dimethylamido) hafnium(IV) and H2S. The deposit is characterized on several different oxide substrates by spectroscopic ellipsometry, scanning electron microscopy, and X-ray photoelectron spectroscopy. In the saturated regime, the growth rate depends on the substrate nature and is between 0.4 and 0.6 Å per sALD cycle. This growth rate determined at room temperature is lower than with the gALD process reported at 100 °C recently. At those low deposition temperatures, the films remain in an amorphous state. This success in sALD expands the range of material classes available by the new method, adding transition metal dichalcogenides to the list containing oxides, cubic sulfides, hydrides, and organics so far. It promises to overcome the precursor constraints associated with the traditional gALD method, in particular the volatility requirement.

| S-EPMC8477444 | biostudies-literature

Nanocavity-Mediated Purcell Enhancement of Er in TiO2 Thin Films Grown via Atomic Layer Deposition.

Project description:The use of trivalent erbium (Er3+), typically embedded as an atomic defect in the solid-state, has widespread adoption as a dopant in telecommunication devices and shows promise as a spin-based quantum memory for quantum communication. In particular, its natural telecom C-band optical transition and spin-photon interface make it an ideal candidate for integration into existing optical fiber networks without the need for quantum frequency conversion. However, successful scaling requires a host material with few intrinsic nuclear spins, compatibility with semiconductor foundry processes, and straightforward integration with silicon photonics. Here, we present Er-doped titanium dioxide (TiO2) thin film growth on silicon substrates using a foundry-scalable atomic layer deposition process with a wide range of doping controls over the Er concentration. Even though the as-grown films are amorphous after oxygen annealing, they exhibit relatively large crystalline grains, and the embedded Er ions exhibit the characteristic optical emission spectrum from anatase TiO2. Critically, this growth and annealing process maintains the low surface roughness required for nanophotonic integration. Finally, we interface Er ensembles with high quality factor Si nanophotonic cavities via evanescent coupling and demonstrate a large Purcell enhancement (≈300) of their optical lifetime. Our findings demonstrate a low-temperature, nondestructive, and substrate-independent process for integrating Er-doped materials with silicon photonics. At high doping densities this platform can enable integrated photonic components such as on-chip amplifiers and lasers, while dilute concentrations can realize single ion quantum memories.

| S-EPMC11008365 | biostudies-literature

Uniformity of HfO2 Thin Films Prepared on Trench Structures via Plasma-Enhanced Atomic Layer Deposition.

Project description:In this study, we assessed the physical and chemical properties of HfO2 thin films deposited by plasma-enhanced atomic layer deposition (PEALD). We confirmed the self-limiting nature of the surface reactions involved in the HfO2 thin film's growth by tracing the changes in the growth rate and refractive index with respect to the different dose times of the Hf precursor and O2 plasma. The PEALD conditions were optimized with consideration of the lowest surface roughness of the films, which was measured by atomic force microscopy (AFM). High-resolution X-ray photoelectron spectroscopy (XPS) was utilized to characterize the chemical compositions, and the local chemical environments of the HfO2 thin films were characterized based on their surface roughness and chemical compositions. The surface roughness and chemical bonding states were significantly influenced by the flow rate and plasma power of the O2 plasma. We also examined the uniformity of the films on an 8″ Si wafer and analyzed the step coverage on a trench structure of 1:13 aspect ratio. In addition, the crystallinity and crystalline phases of the thin films prepared under different annealing conditions and underlying layers were analyzed.

| S-EPMC9823614 | biostudies-literature

Controllable Doping Characteristics for WSxSey Monolayers Based on the Tunable S/Se Ratio.

Project description:Transition metal dichalcogenides (TMDs) have attracted much attention because of their unique characteristics and potential applications in electronic devices. Recent reports have successfully demonstrated the growth of 2-dimensional MoSxSey, MoxWyS2, MoxWySe2, and WSxSey monolayers that exhibit tunable band gap energies. However, few works have examined the doping behavior of those 2D monolayers. This study synthesizes WSxSey monolayers using the CVD process, in which different heating temperatures are applied to sulfur powders to control the ratio of S to Se in WSxSey. Increasing the Se component in WSxSey monolayers produced an apparent electronic state transformation from p-type to n-type, recorded through energy band diagrams. Simultaneously, p-type characteristics gradually became clear as the S component was enhanced in WSxSey monolayers. In addition, Raman spectra showed a red shift of the WS2-related peaks, indicating n-doping behavior in the WSxSey monolayers. In contrast, with the increase of the sulfur component, the blue shift of the WSe2-related peaks in the Raman spectra involved the p-doping behavior of WSxSey monolayers. In addition, the optical band gap of the as-grown WSxSey monolayers from 1.97 eV to 1.61 eV is precisely tunable via the different chalcogenide heating temperatures. The results regarding the doping characteristics of WSxSey monolayers provide more options in electronic and optical design.

| S-EPMC10385163 | biostudies-literature