Dataset Information

Phosphorus Concentration in Water Affects the Biofilm Community and the Produced Amount of Extracellular Polymeric Substances in Reverse Osmosis Membrane Systems.

ABSTRACT: Biofouling is a problem that hinders sustainable membrane-based desalination and the stratification of bacterial populations over the biofilm's height is suggested to compromise the efficiency of cleaning strategies. Some studies reported a base biofilm layer attached to the membrane that is harder to remove. Previous research suggested limiting the concentration of phosphorus in the feed water as a biofouling control strategy. However, the existence of bacterial communities growing under phosphorus-limiting conditions and communities remaining after cleaning is unknown. This study analyzes the bacterial communities developed in biofilms grown in membrane fouling simulators (MFSs) supplied with water with three dosed phosphorus conditions at a constant biodegradable carbon concentration. After biofilm development, biofilm was removed using forward flushing (an easy-to-implement and environmentally friendly method) by increasing the crossflow velocity for one hour. We demonstrate that small changes in phosphorus concentration in the feed water led to (i) different microbial compositions and (ii) different bacterial-cells-to-EPS ratios, while (iii) similar bacterial biofilm populations remained after forward flushing, suggesting a homogenous bacterial community composition along the biofilm height. This study represents an exciting advance towards greener desalination by applying non-expensive physical cleaning methods while manipulating feed water nutrient conditions to prolong membrane system performance and enhance membrane cleanability.

SUBMITTER: Javier L

PROVIDER: S-EPMC8707166 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Similar Datasets

Project description:This work describes the chemical composition of extracellular polymeric substances (EPS) produced by three bacteria (RO1, RO2, and RO3) isolated from a biofouled reverse osmosis (RO) membrane. We isolated pure cultures of three bacterial strains from a 7-year-old biofouled RO module that was used in a full-scale seawater treatment plant. All the bacterial strains showed similar growth rates, biofilm formation, and produced similar quantities of proteins and polysaccharides. The gel permeation chromatography showed that the EPS produced by all the strains has a high molecular weight; however, the EPS produced by strains RO1 and RO3 showed the highest molecular weight. Fourier Transform Infrared Spectroscopy (FTIR), Proton Nuclear Magnetic Resonance (1H NMR), and Carbon NMR (13C NMR) were used for a detailed characterization of the EPS. These physicochemical analyses allowed us to identify features of EPS that are important for biofilm formation. FTIR analysis indicated the presence of α-1,4 glycosidic linkages (920 cm-1) and amide II (1,550 cm-1) in the EPS, the presence of which has been correlated with the fouling potential of bacteria. The presence of α-glycoside linkages was further confirmed by 13C NMR analysis. The 13C NMR analysis also showed that the EPS produced by these bacteria is chemically similar to foulants obtained from biofouled RO membranes in previous studies. Therefore, our results support the hypothesis that the majority of substances that cause fouling on RO membranes originate from bacteria. Investigation using 1H NMR showed that the EPS contained a high abundance of hydrophobic compounds, and these compounds can lead to flux decline in the membrane processes. Genome sequencing of the isolates showed that they represent novel species of bacteria belonging to the genus Bacillus. Examination of genomes showed that these bacteria carry carbohydrates-active enzymes that play a role in the production of polysaccharides. Further genomic studies allowed us to identify proteins involved in the biosynthesis of EPS and flagella involved in biofilm formation. These analyses provide a glimpse into the physicochemical properties of EPS found on the RO membrane. This knowledge can be useful in the rational design of biofilm control treatments for the RO membrane.

Project description:A critical problem in seawater reverse osmosis (RO) filtration processes is biofilm accumulation, which reduces system performance and increases energy requirements. As a result, membrane systems need to be periodically cleaned by combining chemical and physical protocols. Nutrient limitation in the feed water is a strategy to control biofilm formation, lengthening stable membrane system performance. However, the cleanability of biofilms developed under various feed water nutrient conditions is not well understood. This study analyzes the removal efficiency of biofilms grown in membrane fouling simulators (MFSs) supplied with water varying in phosphorus concentrations (3 and 6 μg P·L-1 and with constant biodegradable carbon concentration) by applying hydraulic cleaning after a defined 140% increase in the feed channel pressure drop, through increasing the cross-flow velocity from 0.18 m s-1 to 0.35 m s-1 for 1 h. The two phosphorus concentrations (3 and 6 μg P·L-1) simulate the RO feed water without and with the addition of a phosphorus-based antiscalant, respectively, and were chosen based on measurements at a full-scale seawater RO desalination plant. Biomass quantification parameters performed after membrane autopsies such as total cell count, adenosine triphosphate, total organic carbon, and extracellular polymeric substances were used along with feed channel pressure drop measurements to evaluate biofilm removal efficiency. The outlet water during hydraulic cleaning (1 h) was collected and characterized as well. Optical coherence tomography images were taken before and after hydraulic cleaning for visualization of biofilm morphology. Biofilms grown at 3 μg P·L-1 had an enhanced hydraulic cleanability compared to biofilms grown at 6 μg P·L-1. The higher detachment for biofilms grown at a lower phosphorus concentration was explained by more soluble polymers in the EPS, resulting in a lower biofilm cohesive and adhesive strength. This study confirms that manipulating the feed water nutrient composition can engineer a biofilm that is easier to remove, shifting research focus towards biofilm engineering and more sustainable cleaning strategies.

Project description:Microbial community may respond to different adverse conditions and result in the variation of extracellular polymeric substances (EPS) in denitrification biofilm; this study discovered the role of EPS in accordance with the analysis of cyclic diguanylate (c-di-GMP) and electron equilibrium (EE) under low organic loading rate, shock organic loading rate and low temperature conditions. Good nitrate removal performance could be achieved under shock organic loading rate and low temperature conditions; however, owing to the low organic loading rate, the carbon source was preferentially utilized for biomass growth. Tightly bound EPS (TB-EPS) contents progressively increased and facilitated cell adhesion and biofilm formation. The stable TB protein (TB-PN) content in TB-EPS built a cross-linked network to maintain internal biofilm structure and led to the rapid biosynthesis of polysaccharides, which could further enhance microbial adhesion and improve nitrate removal. C-di-GMP played an important role in biomass retention and biofilm formation, based on the correlation analysis of c-di-GMP and EPS. TB polysaccharide (TB-PS) contents presented a significant positive correlation with c-di-GMP content, microbial adhesion and biofilm stabilization was further enhanced through c-di-GMP regulation. In addition, a remarkable negative correlation between electron deletion rate (EDR) and TB-PN and TB-PS was discovered, and TB-PS was required to serve as energy source to enhance denitrification according to EE analysis. Surprisingly, dynamic microbial community was observed due to the drastic community succession under low temperature conditions, and the discrepancy between the dominant species for denitrification was found under shock organic loading rate and low temperature conditions. The notable increase in bacterial strains Simlicispira, Pseudomonas and Chryseobacterium was conducive to biofilm formation and denitrification under shock organic loading rate, while Dechloromonas and Zoogloea dramatically enriched for nitrate removal under low temperature conditions. The high abundance of Dechloromonas improved the secretion of EPS through the downstream signal transduction, and the c-di-GMP conserved in Pseudomonas concurrently facilitated to enhance exopolysaccharide production to shock organic loading rate and low temperature conditions.

Dataset Information

Phosphorus Concentration in Water Affects the Biofilm Community and the Produced Amount of Extracellular Polymeric Substances in Reverse Osmosis Membrane Systems.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets