Dataset Information

Automated 3D Sampling and Imaging of Uneven Sample Surfaces with LA-REIMS.

ABSTRACT: The analysis of samples with large height variations remains a challenge for mass spectrometry imaging (MSI), despite many technological advantages. Ambient sampling and ionization MS techniques allow for the molecular analysis of sample surfaces with height variations, but most techniques lack MSI capabilities. We developed a 3D MS scanner for the automated sampling and imaging of a 3D surface with laser-assisted rapid evaporative ionization mass spectrometry (LA-REIMS). The sample is moved automatically with a constant distance between the laser probe and sample surface in the 3D MS Scanner. The topography of the surface was scanned with a laser point distance sensor to define the MS measurement points. MS acquisition was performed with LA-REIMS using a surgical CO₂ laser coupled to a qTOF instrument. The topographical scan and MS acquisition can be completed within 1 h using the 3D MS scanner for 300 measurement points on uneven samples with a spatial resolution of 2 mm in the top view, corresponding to 22.04 cm². Comparison between the automated acquisition with the 3D MS scanner and manual acquisition by hand showed that the automation resulted in increased reproducibility between the measurement points. 3D visualizations of molecular distributions related to structural differences were shown for an apple, a marrowbone, and a human femoral head to demonstrate the imaging feasibility of the system. The developed 3D MS scanner allows for the automated sampling of surfaces with uneven topographies with LA-REIMS, which can be used for the 3D visualization of molecular distributions of these surfaces.

SUBMITTER: Nauta SP

PROVIDER: S-EPMC8739836 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Similar Datasets

Project description:BackgroundEndobronchial ultrasound-guided transbronchial fine needle aspiration (EBUS-FNA) has revolutionized the diagnostic and staging approach to non-small cell carcinoma and thoracic lymphadenopathy. However, obstacles to efficacy of rapid on-site evaluation (ROSE) of the samples include variability in sample quality and slow and cumbersome process in the procedure room leading to extended procedure time. The purpose of this pilot study was to evaluate the feasibility and specimen quality of lymph node biopsies prepared through a novel automated system for automated fixation, drying and staining compared to standard slide preparation method.MethodsWe performed a prospective, single-center pilot feasibility study of patients undergoing EBUS. Samples were split into conventional standard of care (SOC) slide preparation and preparation using the device ("instrument"). Pathologists compared the SOC slides to the slides prepared by the automated system and assessed the following metrics: nuclear and cytoplasmic quality, presence of debris/artifact, staining quality, creation of a monolayer, and ease of adequacy/diagnosis assessment. A score between 1 (lowest quality) and 3 (highest quality) was assigned to the above metrics.ResultsSixty patients were recruited. One to three lymph nodes were sampled for each patient for a total of 72 samples collected. The mean scores of each assessment category showed no statistical difference between the two preparation techniques except for improved monolayer creation in the instrument samples. Thirty of thirty-one (96.8%) paired samples in the final analysis showed diagnostic equivalency between the automated slides and conventional slides; the discordant pairing was reported to be suspicious on the instrument sample and atypical on the SOC.ConclusionsStudy results suggest that slides prepared by the automated system are of adequate quality for adequacy assessment with diagnostic concordance when compared to SOC slides.

Project description:IntroductionAs the life expectancy of children with congenital heart disease (CHD) is rapidly increasing and the adult population with CHD is growing, there is an unmet need to improve clinical workflow and efficiency of analysis. Cardiovascular magnetic resonance (CMR) is a noninvasive imaging modality for monitoring patients with CHD. CMR exam is based on multiple breath-hold 2-dimensional (2D) cine acquisitions that should be precisely prescribed and is expert and institution dependent. Moreover, 2D cine images have relatively thick slices, which does not allow for isotropic delineation of ventricular structures. Thus, development of an isotropic 3D cine acquisition and automatic segmentation method is worthwhile to make CMR workflow straightforward and efficient, as the present work aims to establish.MethodsNinety-nine patients with many types of CHD were imaged using a non-angulated 3D cine CMR sequence covering the whole-heart and great vessels. Automatic supervised and semi-supervised deep-learning-based methods were developed for whole-heart segmentation of 3D cine images to separately delineate the cardiac structures, including both atria, both ventricles, aorta, pulmonary arteries, and superior and inferior vena cavae. The segmentation results derived from the two methods were compared with the manual segmentation in terms of Dice score, a degree of overlap agreement, and atrial and ventricular volume measurements.ResultsThe semi-supervised method resulted in a better overlap agreement with the manual segmentation than the supervised method for all 8 structures (Dice score 83.23 ± 16.76% vs. 77.98 ± 19.64%; P-value ≤0.001). The mean difference error in atrial and ventricular volumetric measurements between manual segmentation and semi-supervised method was lower (bias ≤ 5.2 ml) than the supervised method (bias ≤ 10.1 ml).DiscussionThe proposed semi-supervised method is capable of cardiac segmentation and chamber volume quantification in a CHD population with wide anatomical variability. It accurately delineates the heart chambers and great vessels and can be used to accurately calculate ventricular and atrial volumes throughout the cardiac cycle. Such a segmentation method can reduce inter- and intra- observer variability and make CMR exams more standardized and efficient.

Dataset Information

Automated 3D Sampling and Imaging of Uneven Sample Surfaces with LA-REIMS.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets