Browse
Submit Data
Databases
API
Help

Dataset Information

27 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Hall effect in gated single-wall carbon nanotube films.

ABSTRACT: The presence of hopping carriers and grain boundaries can sometimes lead to anomalous carrier types and density overestimation in Hall-effect measurements. Previous Hall-effect studies on carbon nanotube films reported unreasonably large carrier densities without independent assessments of the carrier types and densities. Here, we have systematically investigated the validity of Hall-effect results for a series of metallic, semiconducting, and metal-semiconductor-mixed single-wall carbon nanotube films. With carrier densities controlled through applied gate voltages, we were able to observe the Hall effect both in the n- and p-type regions, detecting opposite signs in the Hall coefficient. By comparing the obtained carrier types and densities against values derived from simultaneous field-effect-transistor measurements, we found that, while the Hall carrier types were always correct, the Hall carrier densities were overestimated by up to four orders of magnitude. This significant overestimation indicates that thin films of one-dimensional SWCNTs are quite different from conventional hopping transport systems.

SUBMITTER: Yomogida Y

PROVIDER: S-EPMC8741975 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Facile preparation of air-stable n-type thermoelectric single-wall carbon nanotube films with anionic surfactants.

Project description:Thermoelectric generators based on single-wall carbon nanotubes (SWCNTs) have great potential for use in wearable and skin electronics because of their lightweight and mechanically soft structure. However, the fabrication of air-stable n-type thermoelectric SWCNTs using conventional processes is challenging. Herein, we propose a facile process for fabricating air-stable n-type SWCNT films with anionic surfactants via drop casting followed by heat treatment. We examined different surfactants (Sodium Dodecyl Sulfate, Sodium Dodecylbenzene Sulfonate, and Sodium Cholate) and heat-treatment temperatures. The optimal SWCNT film maintained the n-type Seebeck coefficient for 35 days. Moreover, to further extend the n-type Seebeck coefficient maintenance, we periodically reheated the SWCNT film with a surfactant that had returned to the p-type Seebeck coefficient. The reheated film recovered the n-type Seebeck coefficient, and the effect of the reheating treatment lasted for several reheating cycles. Finally, we elucidated a simple mechanism for realizing an air-stable n-type Seebeck coefficient based on spectroscopic analyses of the SWCNT films.

| S-EPMC7228955 | biostudies-literature

Influence of Single-Wall Carbon Nanotube Suspension on the Mechanical Properties of Polymeric Films and Electrospun Scaffolds.

Project description:Carbon nanotubes (CNTs) are used in applications ranging from electrical engineering to medical device manufacturing. It is well known that the addition of nanotubes can influence the mechanical properties of various industrial materials, including plastics. Electrospinning is a popular method for fabricating nanomaterials, widely suggested for polymer scaffold manufacturing. In this study, we aimed to describe the influence of single-walled carbon nanotube (SWCNT) suspensions on polymeric poured films and electrospun scaffolds and to investigate their structural and mechanical properties obtained from various compositions. To obtain films and electrospun scaffolds of 8 mm diameter, we used poly-ε-caprolactone (PCL) and poly(cyclohexene carbonate) (PCHC) solutions containing several mass fractions of SWCNT. The samples were characterized using tensile tests, atomic force and scanning electronic microscopy (AFM and SEM). All the studied SWCNT concentrations were shown to decrease the extensibility and strength of electrospun scaffolds, so SWCNT use was considered unsuitable for this technique. The 0.01% mass fraction of SWCNT in PCL films increased the polymer strength, while fractions of 0.03% and more significantly decreased the polymer strength and extensibility compared to the undoped polymer. The PHCH polymeric films showed a similar behavior with an extremum at 0.02% concentration for strength at break.

| S-EPMC10342290 | biostudies-literature

Direct Synthesis of Colorful Single-Walled Carbon Nanotube Thin Films.

Project description:In floating catalyst chemical vapor deposition (FC-CVD), tuning chirality distribution and obtaining narrow chirality distribution of single-walled carbon nanotubes (SWCNTs) is challenging. Herein, by introducing various amount of CO2 in FC-CVD using CO as a carbon source, we have succeeded in directly synthesizing SWCNT films with tunable chirality distribution as well as tunable colors. In particular, with 0.25 and 0.37 volume percent of CO2, the SWCNT films display green and brown colors, respectively. We ascribed various colors to suitable diameter and narrow chirality distribution of SWCNTs. Additionally, by optimizing reactor temperature, we achieved much narrower ( n, m) distribution clustered around (11,9) with extremely narrow diameter range (>98% between 1.2 and 1.5 nm). We propose that CO2 may affect CO disproportionation and nucleation modes of SWCNTs, resulting in SWCNTs' various diameter ranges. Our work could provide a new route for high-yield and direct synthesis of SWCNTs with narrow chirality distribution and offer potential applications in electronics, such as touch sensors or transistors.

| S-EPMC6150687 | biostudies-literature

Investigating the Effect of Carbon Nanotube Diameter and Wall Number in Carbon Nanotube/Silicon Heterojunction Solar Cells.

Project description:Suspensions of single-walled, double-walled and multi-walled carbon nanotubes (CNTs) were generated in the same solvent at similar concentrations. Films were fabricated from these suspensions and used in carbon nanotube/silicon heterojunction solar cells and their properties were compared with reference to the number of walls in the nanotube samples. It was found that single-walled nanotubes generally produced more favorable results; however, the double and multi-walled nanotube films used in this study yielded cells with higher open circuit voltages. It was also determined that post fabrication treatments applied to the nanotube films have a lesser effect on multi-walled nanotubes than on the other two types.

| S-EPMC5302527 | biostudies-literature

Ultra-pure single wall carbon nanotube fibres continuously spun without promoter.

Project description:We report a new strategy towards the control of carbon nanotube (CNT) structure and continuous fibre formation using a floating catalyst direct spinning CVD process. In the procedures used to date, a sulphur promoter precursor is added to significantly enhance the rate of CNT formation in the floating catalyst synthesis. Within the reaction zone, the rapidly grown nanotubes self-assemble into bundles, followed by their continuous spinning into fibres, yarns, films or tapes. In this paper we demonstrate a catalyst control strategy in the floating catalyst system, where the CNT formation process is independent of the presence of a promoter but leads to successful spinning of the macroscopic carbon nanotube assemblies with specific morphology, high purity (Raman D/G 0.03) and very narrow diameter range (0.8-2.5 nm). This can be achieved by the control of catalyst precursor decomposition and subsequent formation of homogeneous nano-sized catalyst particles.

| S-EPMC3912484 | biostudies-literature

Wafer-Scale Thermophoretic Dry Deposition of Single-Walled Carbon Nanotube Thin Films.

Project description:We report the direct and dry deposition of transparent conducting films (TCFs) of aerosol-synthesized single-walled carbon nanotubes (SWNTs) using a thermophoretic precipitator (TP) designed for the uniform and efficient deposition of aerosol-synthesized nanomaterials on 50 mm wafers or similarly sized polymer substrates. The optical and electrical performance of the fabricated TCFs match or surpass the published results achieved using a filter-based collection of aerosol-synthesized SWNTs, and TCFs with sheet resistances of 60 Ω/sq. at 87.8% transmittance and 199 Ω/sq. at 96% transmittance on flexible polymer substrates are demonstrated. The precipitator design is immediately applicable in roll-to-roll fabrication of SWNT TCFs or other functional coatings of aerosol-synthesized nanomaterials.

| S-EPMC6641514 | biostudies-literature

Ultrahigh-performance transparent conductive films of carbon-welded isolated single-wall carbon nanotubes.

Project description:Single-wall carbon nanotubes (SWCNTs) are ideal for fabricating transparent conductive films because of their small diameter, good optical and electrical properties, and excellent flexibility. However, a high intertube Schottky junction resistance, together with the existence of aggregated bundles of SWCNTs, leads to a degraded optoelectronic performance of the films. We report a network of isolated SWCNTs prepared by an injection floating catalyst chemical vapor deposition method, in which crossed SWCNTs are welded together by graphitic carbon. Pristine SWCNT films show a record low sheet resistance of 41 ohm ?-1 at 90% transmittance for 550-nm light. After HNO3 treatment, the sheet resistance further decreases to 25 ohm ?-1. Organic light-emitting diodes using this SWCNT film as anodes demonstrate a low turn-on voltage of 2.5 V, a high current efficiency of 75 cd A-1, and excellent flexibility. Investigation of isolated SWCNT-based field-effect transistors shows that the carbon-welded joints convert the Schottky contacts between metallic and semiconducting SWCNTs into near-ohmic ones, which significantly improves the conductivity of the transparent SWCNT network. Our work provides a new avenue of assembling individual SWCNTs into macroscopic thin films, which demonstrate great potential for use as transparent electrodes in various flexible electronics.

| S-EPMC5935479 | biostudies-literature

Conformally Gated Surface Conducting Behaviors of Single-Walled Carbon Nanotube Thin-Film-Transistors.

Project description:Semiconducting single-walled carbon nanotubes (s-SWCNTs) have gathered significant interest in various emerging electronics due to their outstanding electrical and mechanical properties. Although large-area and low-cost fabrication of s-SWCNT field effect transistors (FETs) can be easily achieved via solution processing, the electrical performance of the solution-based s-SWCNT FETs is often limited by the charge transport in the s-SWCNT networks and interface between the s-SWCNT and the dielectrics depending on both s-SWCNT solution synthesis and device architecture. Here, we investigate the surface and interfacial electro-chemical behaviors of s-SWCNTs. In addition, we propose a cost-effective and straightforward process capable of minimizing polymers bound to s-SWCNT surfaces acting as an interfering element for the charge carrier transport via a heat-assisted purification (HAP). With the HAP treated s-SWCNTs, we introduced conformal dielectric configuration for s-SWCNT FETs, which are explored by a carefully designed wide array of electrical and chemical characterizations with finite-element analysis (FEA) computer simulation. For more favorable gate-field-induced surface and interfacial behaviors of s-SWCNT, we implemented conformally gated highly capacitive s-SWCNT FETs with ion-gel dielectrics, demonstrating field-effect mobility of ~8.19 cm2/V⋅s and on/off current ratio of ~105 along with negligible hysteresis.

| S-EPMC8234559 | biostudies-literature

A Flexible NO<sub>2</sub> Gas Sensor Based on Single-Wall Carbon Nanotube Films Doped with a High Level of Nitrogen.

Project description:Carbon nanotubes (CNTs) are considered a promising candidate for the detection of toxic gases because of their high specific surface area and excellent electrical and mechanical properties. However, the detecting performance of CNT-based detectors needs to be improved because covalently bonded CNTs are usually chemically inert. We prepared a nitrogen-doped single-wall CNT (SWCNT) film by means of gas-phase fluorination followed by thermal annealing in NH3. The doped nitrogen content could be changed in the range of 2.9-9.9 at%. The N-doped SWCNT films were directly used to construct flexible and transparent gas sensors, which can work at a low voltage of 0.01 V. It was found that their NO2 detection performance was closely related to their nitrogen content. With an optimum nitrogen content of 9.8 at%, a flexible sensor had a detection limit of 500 ppb at room temperature with good cycling ability and stability during bending.

| S-EPMC9573668 | biostudies-literature

Zipping, entanglement, and the elastic modulus of aligned single-walled carbon nanotube films.

Project description:Reliably routing heat to and from conversion materials is a daunting challenge for a variety of innovative energy technologies--from thermal solar to automotive waste heat recovery systems--whose efficiencies degrade due to massive thermomechanical stresses at interfaces. This problem may soon be addressed by adhesives based on vertically aligned carbon nanotubes, which promise the revolutionary combination of high through-plane thermal conductivity and vanishing in-plane mechanical stiffness. Here, we report the data for the in-plane modulus of aligned single-walled carbon nanotube films using a microfabricated resonator method. Molecular simulations and electron microscopy identify the nanoscale mechanisms responsible for this property. The zipping and unzipping of adjacent nanotubes and the degree of alignment and entanglement are shown to govern the spatially varying local modulus, thereby providing the route to engineered materials with outstanding combinations of mechanical and thermal properties.

| S-EPMC3870663 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data