Hybrid RF-Si Xerogels: A Cost-Effective Proposal for Insulator Materials.
Ontology highlight
ABSTRACT:
SUBMITTER: Flores-Lopez SL
PROVIDER: S-EPMC8745971 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:This paper shows the first study of the synthesis of hybrid materials consisting of commercial Norit carbons and oligothiophenes. The study presents the influence of surface oxidation on dye deposition as well as changes of pore structure and surface chemistry. The hybrid materials were characterised using Raman spectroscopy, and scanning and transmission electron microscopy (SEM and HR-TEM, respectively). Confocal microscopy was employed to confirm the immobilization of oligomers on the surface of the carbons being investigated. Confocal microscopy measurements were additionally used to indicate whether dye molecules covered the entire surface of the selected commercial Norit samples. Specific surface area and pore structure parameters were determined by low-temperature nitrogen adsorption. Additionally, elemental content and surface chemistry were characterised by means of X-ray photoelectron spectroscopy (XPS) and combustion elemental analysis. Experimental results confirmed that oligothiophene dyes were adsorbed onto the internal part of the investigated pores of the carbon materials. The pores were assumed to have a slit-like shape, a set of 82 local adsorption isotherms was modelled for pores from 0.465 nm to 224 nm. Further, XPS data showed promising qualitative results regarding the surface characteristics and chemical composition of the hybrid materials obtained (sulphur content ranged from 1.40 to 1.45 at%). It was shown that the surface chemistry of activated carbon plays a key role in the dye deposition process. High surface heterogeneity after hydrothermal oxidation did not improve dye adsorption due to specific interactions between surface oxygen moieties and local electric charges in the oligothiophene molecules.
| S-EPMC6829365 | biostudies-literature
Project description:Hybrid silica xerogels combine the properties of organic and inorganic components in the same material, making them highly promising and versatile candidates for multiple applications. They can be tailored for specific purposes through chemical modifications, and the consequent changes in their structures warrant in-depth investigation. We describe the synthesis of three new series of organochlorinated xerogels prepared by co-condensation of tetraethyl orthosilicate (TEOS) and chloroalkyltriethoxysilane (ClRTEOS; R = methyl [M], ethyl [E], or propyl [P]) at different molar ratios. The influence of the precursors on the morphological and textural properties of the xerogels was studied using 29Si NMR (Nuclear Magnetic Resonance), FTIR (Fourier-Transform Infrared Spectroscopy), N2, and CO2 adsorption, XRD (X-ray Diffraction), and FE-SEM (Field-Emission Scanning Electron Microscopy). The structure and morphology of these materials are closely related to the nature and amount of the precursor, and their microporosity increases proportionally to the molar percentage of ClRTEOS. In addition, the influence of the chlorine atom was investigated through comparison with their non-chlorinated analogues (RTEOS, R = M, E, or P) prepared in previous studies. The results showed that a smaller amount of precursor was needed to detect ordered domains (ladders and T8 cages) in the local structure. The possibility of coupling self-organization with tailored porosity opens the way to novel applications for this type of organically modified silicates.
| S-EPMC8123792 | biostudies-literature
Project description:The PEDOT:PSS is often used as the window layer in the normal structured PEDOT:PSS/c-Si hybrid solar cell (HSC), leading to significantly reduced response, especially in red and near-infrared region. By depositing the PEDOT:PSS on the rear side of the c-Si wafer, we developed an inverted structured HSC with much higher solar cell response in the red and near-infrared spectrum. Passivating the other side with hydrogenated amorphous silicon (a-Si:H) before electrode deposition, the minority carrier lifetime has been significantly increased and the power conversion efficiency (PCE) of the inverted HSC is improved to as high as 16.1% with an open-circuit voltage (Voc) of 634?mV, fill factor (FF) of 70.5%, and short-circuit current density (Jsc) of 36.2?mA cm-2, an improvement of 33% over the control device. The improvements are ascribed to inverted configuration and a-Si:H passivation, which can increase photon carrier generation and reduce carrier recombination, respectively. Both of them will benefit the photovoltaic performance and should be considered as effective design strategies to improve the performance of organic/c-Si HSCs.
| S-EPMC5057131 | biostudies-literature
Project description:BackgroundEculizumab is a lifesaving yet expensive drug for atypical haemolytic uraemic syndrome (aHUS). Current guidelines advise a fixed-dosing schedule, which can be suboptimal and inflexible in the individual patient.MethodsWe evaluated the pharmacokinetics (PK) and pharmacodynamics (PD) [classical pathway (CP) activity levels] of eculizumab in 48 patients, consisting of 849 time-concentration data and 569 CP activity levels. PK-PD modelling was performed with non-linear mixed-effects modelling. The final model was used to develop improved dosing strategies.ResultsA PK model with parallel linear and non-linear elimination rates best described the data with the parameter estimates clearance 0.163 L/day, volume of distribution 6.42 L, maximal rate 29.6 mg/day and concentration for 50% of maximum rate 37.9 mg/L. The PK-PD relation between eculizumab concentration and CP activity was described using an inhibitory Emax model with the parameter estimates baseline 101%, maximal inhibitory effect 95.9%, concentration for 50% inhibition 22.0 mg/L and Hill coefficient 5.42. A weight-based loading dose, followed by PK-guided dosing was found to improve treatment. On day 7, we predict 99.95% of the patients to reach the efficacy target (CP activity <10%), compared with 94.75% with standard dosing. Comparable efficacy was predicted during the maintenance phase, while the dosing interval could be prolonged in ∼33% of the population by means of individualized dosing. With a fixed-dose 4-week dosing interval to allow for holidays, treatment costs will increase by 7.1% and we predict 91% of the patients will reach the efficacy target.ConclusionsA patient-friendly individualized dosing strategy of eculizumab has the potential to improve treatment response at reduced costs.
| S-EPMC9923710 | biostudies-literature
Project description:Advances in single-cell genomics enable commensurate improvements in methods for uncovering lineage relations among individual cells. Current sequencing based methods for cell lineage analysis depend on low resolution bulk analysis or rely on extensive single cell sequencing which is not scalable and could be biased by functional dependencies. Here we show an integrated biochemical-computational platform for generic single-cell lineage analysis that is retrospective, cost-effective and scalable. It consists of a biochemical-computational pipeline that inputs individual cells, produces targeted single-cell sequencing data and uses it to generate a lineage tree of the input cells. We validated the platform by applying it to cells sampled from an ex vivo grown tree and analyzed its feasibility landscape by computer simulations. We conclude that the platform may serve as a generic tool for lineage analysis and thus pave the way towards large-scale human cell lineage discovery.
2016-04-18 | E-MTAB-4553 | biostudies-arrayexpress
Project description:The combination of norbornenyl-tagged (Nb-tagged) silica particles and functionalized Nb-tagged monomers for the generation of hybrid Si-ROMP reagents and scavengers is reported. Specifically Si-ROMP-derived bis-acid chloride, dichlorotriazine, and triphenylphosphine scavenger/reagents have been grafted from the surface of silica particles utilizing surface-initiated, ring-opening metathesis polymerization (ROMP). These hybrid polymeric materials combine the physical properties of current immobilized silica reagents and represent a key advancement in load by merging the inherent tunable properties of the ROMP-derived oligomers with silica supports for application in a parallel synthesis.
| S-EPMC3271940 | biostudies-literature
Project description:This work presents a cost-effective approach for processing of renewable carbon-rich biomass using pyridinium-based Lewis acidic ionic liquids (LAILs). Rice husk as carbon-rich lignocellulosic waste was pretreated with a series of neutral and Lewis acidic ionic liquids to yield valuable intermediate platform monosaccharides. Novelty in the work lies in direct conversion of lignocellulosic carbohydrates into reducing sugars without their further conversion into 5-hydroxymethylfurfural or any other platform chemicals that are fermentation inhibitors for bioethanol production. The unconverted cellulose-rich material (CRM) is regenerated as a delignified material by the simultaneous addition of antisolvents. CRM and recovered lignin obtained after pretreatment were analyzed via scanning electron microscopy (SEM), thermogravimetric analysis (TGA), and Fourier transform infrared (FTIR) spectroscopy. The process was optimized with respect to a high yield of platform sugars and the quantity as well as quality of recovered CRM and lignin contents. Various reaction parameters involving the molecular structure of ionic liquids (ILs), Lewis acidic strength of ILs, biomass loading into IL, time, temperature, and biomass particle size were screened thoroughly. From all of the tested ILs, unsymmetrical 3-methylpyridinium IL having N-octyl substitution and chloroaluminate anion showed a greater conversion efficiency at 100 °C for 1.5 h. FTIR and SEM analyses of recovered CRM justify >90% lignin removal from rice husk. From all of the removed lignin, 60 wt % of original lignin content was recovered. The Lewis acidic system possessed recycling ability up to 3 times for subsequent treatment of rice husk without a significant loss of efficiency.
| S-EPMC8567403 | biostudies-literature
Project description:The challenge in solar energy today is not the cost of photovoltaic (PV) electricity generation, already competing with fossil fuel prices, but rather utility-scale energy storage and flexibility in supply. Low-cost thermal energy storage (TES) exists but relies on expensive heat engines. Here, we introduce the concept of luminescent solar power (LSP), where sunlight is absorbed in a photoluminescent (PL) absorber, followed by red-shifted PL emission matched to an adjacent PV cell's band edge. This way the PV cell operates nearly as efficiently as under direct illumination but with minimal excessive heat. The PL absorber temperature rises because of thermalization, allowing it to store the excessive heat, which can later be converted into electricity. Tailored luminescent materials that support an additional 1.5 kW h PV electricity for every 1 kW h of (virtual) heat engine electricity with a dynamic shift between the two sources are experimentally demonstrated. Such an ideal hybrid system may lead to a potential reduction in the cost of electricity for a base-load solution.
| S-EPMC7526987 | biostudies-literature
Project description:DNA microarrays are two-dimensional arrangements of specific probes deposited on a substrate that have been widely used in gene expression analysis by measuring mRNA accumulation. The use of this type of microarrays involves the synthesis of cDNA, which has to be double stranded (ds) if the microarray probes are of the positive strand. We have used a custom-synthesized non-commercial NimbleGen microarray from melon to evaluate an alternative method of ds cDNA synthesis, which differs substantially in its economical cost relative to a widely recommended method. The results suggested that both methods produce cDNA representative of the melon transcriptome to a similar extent, indicating that the alternative technique provides a cheaper method of ds cDNA synthesis for microarray gene expression assays. Recently, we have analyzed the transcriptome of melon in response to WMV infection. Cotyledons of two genotypes of melon were virus inoculated and transcriptomic responses to the infection were analyzed by comparing infected and mock inoculated samples at 1, 3, and 7 days post-inoculation (dpi). Three biological replicates were performed for each sample. Double stranded cDNA was obtained with the Double stranded cDNA synthesis kit (Invitrogen, Carlsbad, CA, USA), based on the nick translation approach (Mol. Cell. Biol (1982) 2:161-170; Gene (1983) 25:263-269). Raw and processed microarray data are freely available from GEO database under the accession number GSE30111. By using this set of microarray hybridizations as a reference, RNA corresponding to infected cotyledons replicate 3 at 1 dpi (A1) and replicate 1 at 3 dpi (A2) (GEO accession numbers GSM745566 and GSM745567) were used to perform cDNA synthesis by the alternative method (samples B1 and B2, respectively), based on the SMART approach (BioTechniques (2001) 30:892-897), and microarray data were compared.
2012-03-07 | E-GEOD-30693 | biostudies-arrayexpress
Project description:The properties of hybrid silica xerogels obtained by the sol-gel method are highly dependent on the precursor and the synthesis conditions. This study examines the influence of organic substituents of the precursor on the sol-gel process and determines the structure of the final materials in xerogels containing tetraethyl orthosilicate (TEOS) and alkyltriethoxysilane or chloroalkyltriethoxysilane at different molar percentages (RTEOS and ClRTEOS, R = methyl [M], ethyl [E], or propyl [P]). The intermolecular forces exerted by the organic moiety and the chlorine atom of the precursors were elucidated by comparing the sol-gel process between alkyl and chloroalkyl series. The microstructure of the resulting xerogels was explored in a structural theoretical study using Fourier transformed infrared spectroscopy and deconvolution methods, revealing the distribution of (SiO)4 and (SiO)6 rings in the silicon matrix of the hybrid xerogels. The results demonstrate that the alkyl chain and the chlorine atom of the precursor in these materials determines their inductive and steric effects on the sol-gel process and, therefore, their gelation times. Furthermore, the distribution of (SiO)4 and (SiO)6 rings was found to be consistent with the data from the X-ray diffraction spectra, which confirm that the local periodicity associated with four-fold rings increases with higher percentage of precursor. Both the sol-gel process and the ordered domains formed determine the final structure of these hybrid materials and, therefore, their properties and potential applications.
| S-EPMC8271438 | biostudies-literature