Biomass-Derived Porous Carbon from Agar as an Anode Material for Lithium-Ion Batteries.
Ontology highlight
ABSTRACT:
SUBMITTER: Issatayev N
PROVIDER: S-EPMC8746817 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Nowadays, designing heteroatom-doped porous carbons from inexpensive biomass raw materials is a very attractive topic. Herein, we propose a simple approach to prepare heteroatom-doped porous carbons by using nettle leaves as the precursor and KOH as the activating agent. The nettle leaf derived porous carbons possess high specific surface area (up to 1951 m2 g-1), large total pore volume (up to 1.374 cm3 g-1), and high content of nitrogen and oxygen heteroatom doping (up to 17.85 at% combined). The obtained carbon as an electrode for symmetric supercapacitors with an ionic liquid electrolyte can offer a superior specific capacitance of 163 F g-1 at 0.5 A g-1 with a capacitance retention ratio as high as 67.5% at 100 A g-1, and a low capacitance loss of 8% after 10 000 cycles. Besides, the as-built supercapacitor demonstrates a high specific energy of 50 W h kg-1 at a specific power of 372 W kg-1, and maintains 21 W h kg-1 at the high power of 40 kW kg-1. Moreover, the resultant carbon as a Li-ion battery anode delivers a high reversible capacity of 1262 mA h g-1 at 0.1 A g-1 and 730 mA h g-1 at 0.5 A g-1, and maintains a high capacity of 439 mA h g-1 after 500 cycles at 1 A g-1. These results demonstrate that the nettle leaf derived porous carbons offer great potential as electrodes for advanced supercapacitors and lithium ion batteries.
| S-EPMC9072952 | biostudies-literature
Project description:Carbon-SnO x composites are obtained by impregnating acetylacetone-treated, delignified wood fibers with tin precursor and successively carbonizing at 1000 °C in 95% argon and 5% oxygen. Scanning electron microscopy and nitrogen sorption studies (Brunauer-Emmett-Teller) show that acetylacetone treatment stabilizes the wood fiber structure during carbonization at 1000 °C and preserves the porous structural features. X-ray diffraction, transmission electron microscopy, and X-ray photoelectron spectroscopy studies show that the small amount of oxygen introduced in inert atmosphere passivates the surface of tin nanoparticles. The passivation process yields thermally and electrochemically stable SnO x particles embedded in carbon matrix. The resultant carbon-SnO x material with 16 wt% SnO x shows excellent electrochemical performance of rate capability from 0.1 to 10 A g-1 and cycling stability for 1000 cycles with Li-ion storage capacity of 280 mAh g-1 at a current density of 10 A g-1. The remarkable electrochemical performance of wood-derived carbon-SnO x composite is attributed to the reproduction of structural featured wood fibers to nanoscale in carbon-SnO x composite and controlled passivation of tin nanoparticles to yield SnO x nanoparticles.
| S-EPMC6957017 | biostudies-literature
Project description:Sodium-ion batteries (SIBs) are in the spotlight because of their potential use in large-scale energy storage devices due to the abundance and low cost of sodium-based materials. There are many SIB cathode materials under investigation but only a few candidate materials such as carbon, oxides and alloys were proposed as anodes. Among these anode materials, hard carbon shows promising performances with low operating potential and relatively high specific capacity. Unfortunately, its low initial coulombic efficiency and high cost limit its commercial applications. In this study, low-cost maple tree-biomass-derived hard carbon is tested as the anode for sodium-ion batteries. The capacity of hard carbon prepared at 1400 °C (HC-1400) reaches 337 mAh/g at 0.1 C. The initial coulombic efficiency is up to 88.03% in Sodium trifluoromethanesulfonimide (NaTFSI)/Ethylene carbonate (EC): Diethyl carbonate (DEC) electrolyte. The capacity was maintained at 92.3% after 100 cycles at 0.5 C rates. The in situ X-ray diffraction (XRD) analysis showed that no peak shift occurred during charge/discharge, supporting a finding of no sodium ion intercalates in the nano-graphite layer. Its low cost, high capacity and high coulombic efficiency indicate that hard carbon is a promising anode material for sodium-ion batteries.
| S-EPMC6117673 | biostudies-literature
Project description:To explore anode materials with large capacities and high rate performances for the lithium-ion batteries of electric vehicles, defective Ti2Nb10O27.1 has been prepared through a facile solid-state reaction in argon. X-ray diffractions combined with Rietveld refinements indicate that Ti2Nb10O27.1 has the same crystal structure with stoichiometric Ti2Nb10O29 (Wadsley-Roth shear structure with A2/m space group) but larger lattice parameters and 6.6% O(2-) vacancies (vs. all O(2-) ions). The electronic conductivity and Li(+)ion diffusion coefficient of Ti2Nb10O27.1 are at least six orders of magnitude and ~2.5 times larger than those of Ti2Nb10O29, respectively. First-principles calculations reveal that the significantly enhanced electronic conductivity is attributed to the formation of impurity bands in Ti2Nb10O29-x and its conductor characteristic. As a result of the improvements in the electronic and ionic conductivities, Ti2Nb10O27.1 exhibits not only a large initial discharge capacity of 329 mAh g(-1) and charge capacity of 286 mAh g(-1) at 0.1 C but also an outstanding rate performance and cyclability. At 5 C, its charge capacity remains 180 mAh g(-1) with large capacity retention of 91.0% after 100 cycles, whereas those of Ti2Nb10O29 are only 90 mAh g(-1) and 74.7%.
| S-EPMC4668578 | biostudies-literature
Project description:Owing to their structural diversity and mesoporous construction, metal-organic frameworks (MOFs) have been used as templates to prepare mesoporous metal oxides, which show excellent performance as anode materials for lithium-ion batteries (LIBs). Co-ZnO/C and Co-Co3O4/C nanohybrids were successfully synthesized based on a precursor of Co-doped MOF-5 by accurately controlling the annealing temperature and atmosphere. Experimental data proved that their electrochemical performance was closely associated with the material phase, especially for Co-ZnO/C, indicating that carbon skeleton materials can maintain a good restoration rate of over 99% after undergoing high-current density cycling. Meanwhile, Co-Co3O4/C nanohybrids showed an exceedingly high reversible capacity of 898 mAh∙g-1 at a current density of 0.1 C after 100 cycles. Their improved coulombic efficiency and superior rate capability contribute to a mesoporous structure, which provides pathways allowing for rapid Li+ diffusion and regulates volume change during charge and discharge processes.
| S-EPMC11314184 | biostudies-literature
Project description:Bagasse-derived carbon electrodes were developed by doping with nitrogen functional groups and compositing with high-capacity MnO2 nanoparticles (MnO2/NBGC). The bagasse-derived biochar was N-doped by refluxing in urea, followed by the deposition of MnO2 nanoparticles onto its porous surface via the hydrothermal reduction of KMnO4. Different initial KMnO4 loading concentrations (i.e. 5, 10, 40, and 100 mM) were applied to optimize the composite morphology and the corresponding electrochemical performance. Material characterization confirmed that the carbon composite has a mesoporous structure along with the dispersion of MnO2 nano-particles on the N-containing carbon surface. It was found that the 5-MnO2/NBGC sample exhibited the highest electrochemical performance with a reversible capacity of 760 mA h g-1 at a current density of 186 mA g-1. It delivered reversible capacities of 488 and 390 mA h g-1 in cycle tests at 372 and 744 mA g-1, respectively, for 150 cycles and presented good reversibility with nearly 100% coulombic efficiency. In addition, it could exert high capacities up to 388 and 301 mA h g-1 even under high current densities of 1860 and 3720 mA g-1, respectively. Moreover, most of the prepared composite products showed high rate capability with great reversibility up to more than 90% after testing at a high current density of 3720 mA g-1. The great electrochemical performance of the MnO2/NBGC nanocomposite electrode can be attributed to the synergistic impact of the hierarchical architecture of the MnO2 nanocrystals deposited on porous carbon and the capacitive effect of the N-containing defects within the carbon material. The nanostructure of the MnO2 particles deposited on porous carbon limits its large volume change during cycling and promotes good adhesion of MnO2 nanoparticles with the substrate. Meanwhile, the capacitive effect of the exposed N-functional groups enables fast ionic conduction and reduces interfacial resistance at the electrode interface.
| S-EPMC10782432 | biostudies-literature
Project description:Highly monodisperse porous silicon nanospheres (MPSSs) are synthesized via a simple and scalable hydrolysis process with subsequent surface-protected magnesiothermic reduction. The spherical nature of the MPSSs allows for a homogenous stress-strain distribution within the structure during lithiation and delithiation, which dramatically improves the electrochemical stability. To fully extract the real performance of the MPSSs, carbon nanotubes (CNTs) were added to enhance the electronic conductivity within the composite electrode structure, which has been verified to be an effective way to improve the rate and cycling performance of anodes based on nano-Si. The Li-ion battery (LIB) anodes based on MPSSs demonstrate a high reversible capacity of 3105 mAh g(-1). In particular, reversible Li storage capacities above 1500 mAh g(-1) were maintained after 500 cycles at a high rate of C/2. We believe this innovative approach for synthesizing porous Si-based LIB anode materials by using surface-protected magnesiothermic reduction can be readily applied to other types of SiOx nano/microstructures.
| S-EPMC4350083 | biostudies-literature
Project description:During the past decade, tremendous attention has been given to the development of new electrode materials with high capacity to meet the requirements of electrode materials with high energy density in lithium ion batteries. Very recently, cobalt silicate has been proposed as a new type of high capacity anode material for lithium ion batteries. However, the bulky cobalt silicate demonstrates limited electrochemical performance. Nanostructure engineering and carbon coating represent two promising strategies to improve the electrochemical performance of electrode materials. Herein, we developed a template method for the synthesis of amorphous cobalt silicate nanobelts which can be coated with carbon through the deposition and thermal decomposition of phenol formaldehyde resin. Tested as an anode material, the amorphous cobalt silicate nanobelts@carbon composites exhibit a reversible high capacity of 745 mA h g-1 at a current density of 100 mA g-1, and a long life span of up to 1000 cycles with a stable capacity retention of 480 mA h g-1 at a current density of 500 mA g-1. The outstanding electrochemical performance of the composites indicates their high potential as an anode material for lithium ion batteries. The results here are expected to stimulate further research into transition metal silicate nanostructures for lithium ion battery applications.
| S-EPMC5510008 | biostudies-other
Project description:Carbon-coated Li4Ti5O12 (LTO) has been prepared using polyimide (PI) as a carbon source via the thermal imidization of polyamic acid (PAA) followed by a carbonization process. In this study, the PI with different structures based on pyromellitic dianhydride (PMDA), 4,4'-oxydianiline (ODA), and p-phenylenediamine (p-PDA) moieties have been synthesized. The effect of the PI structure on the electrochemical performance of the carbon-coated LTO has been investigated. The results indicate that the molecular arrangement of PI can be improved when the rigid p-PDA units are introduced into the PI backbone. The carbons derived from the p-PDA-based PI show a more regular graphite structure with fewer defects and higher conductivity. As a result, the carbon-coated LTO exhibits a better rate performance with a discharge capacity of 137.5 mAh/g at 20 C, which is almost 1.5 times larger than that of bare LTO (94.4 mAh/g).
| S-EPMC8196661 | biostudies-literature
Project description:Porous hydrogen substituted graphyne (HsGY) has been considered as a promising candidate for anode material due to its excellent electrochemical properties. In this work, we found that monolayer and bilayer HsGY are good electrodes for high charge capacity lithium-ion batteries based on density functional theory calculations. Mechanical tests reveal that monolayer and bilayer HsGY exhibit excellent mechanical properties, including large critical strains (>25%) and high in-plane stiffness (>200 N m-1). The bilayer HsGY displays ultrahigh stiffness (400.27 N m-1). Li adsorption on bilayer HsGY is stronger than that on the monolayer HsGY. Moreover, Li diffusion on the surfaces of monolayer and bilayer HsGY has low energy barriers (<0.5 eV). Our calculation results suggest that HsGY may contain the highest theoretical charge capacity among two-dimensional (2D) materials studied so far, with ultrahigh Li capacities of 3378 and 2895 mA h g-1 for monolayer and bilayer HsGY, respectively. Given these advantages, including large critical strain, high mechanical stiffness, strong adsorption, low diffusive energy barrier, and high charge capacity, we conclude that both monolayer and bilayer HsGY could be promising anode materials for lithium-ion batteries.
| S-EPMC9034235 | biostudies-literature