Browse
Submit Data
Databases
API
Help

Dataset Information

24 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Properties of Halide Perovskite Photodetectors with Little Rubidium Incorporation.

ABSTRACT: This study investigates the effects of Rb doping on the Rb-formamidinium-methylammonium-PbI₃ based perovskite photodetectors. Rb was incorporated in the perovskite films with different contents, and the corresponding photo-response properties were studied. Doping of few Rb (~2.5%) was found to greatly increase the grain size and the absorbance of the perovskite. However, when the Rb content was greater than 2.5%, clustering of the Rb-rich phases emerged, the band gap decreased, and additional absorption band edge was found. The excess Rb-rich phases were the main cause that degraded the performance of the photodetectors. By space charge limit current analyses, the Rb was found to passivate the defects in the perovskite, lowering the leakage current and reducing the trap densities of carriers. This fact was used to explain the increase in the detectivity. To clarify the effect of Rb, the photovoltaic properties were measured. Similarly, h perovskite with 2.5% Rb doping increased the short-circuit current, revealing the decline of the internal defects. The 2.5% Rb doped photodetector showed the best performance with responsivity of 0.28 AW^-1 and ~50% quantum efficiency. Detectivity as high as 4.6 × 10¹¹ Jones was obtained, owing to the improved crystallinity and reduced defects.

SUBMITTER: Hsiao YW

PROVIDER: S-EPMC8746863 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Broadband-tunable spectral response of perovskite-on-paper photodetectors using halide mixing.

Project description:Paper offers a low-cost and widely available substrate for electronics. It possesses alternative characteristics to silicon, as it shows low density and high flexibility, together with biodegradability. Solution processable materials, such as hybrid perovskites, also present light and flexible features, together with a huge tunability of the material composition with varying optical properties. In this study, we combine paper substrates with halide-mixed perovskites for the creation of low-cost and easy-to-prepare perovskite-on-paper photodetectors with a broadband-tunable spectral response. From the bandgap tunability of halide-mixed perovskites we create photodetectors with a cut-off spectral onset that ranges from the NIR to the green region, by increasing the bromide content on MAPb(I1-xBrx)3 perovskite alloys. The devices show a fast and efficient response. The best performances are observed for pure I and Br perovskite compositions, with a maximum responsivity of ∼400 mA W-1 on the MAPbBr3 device. This study provides an example of the wide range of possibilities that the combination of solution processable materials with paper substrates offers for the development of low-cost, biodegradable and easy-to-prepare devices.

| S-EPMC9536486 | biostudies-literature

Potassium- and Rubidium-Passivated Alloyed Perovskite Films: Optoelectronic Properties and Moisture Stability.

Project description:Halide perovskites passivated with potassium or rubidium show superior photovoltaic device performance compared to unpassivated samples. However, it is unclear which passivation route is more effective for film stability. Here, we directly compare the optoelectronic properties and stability of thin films when passivating triple-cation perovskite films with potassium or rubidium species. The optoelectronic and chemical studies reveal that the alloyed perovskites are tolerant toward higher loadings of potassium than rubidium. Whereas potassium complexes with bromide from the perovskite precursor solution to form thin surface passivation layers, rubidium additives favor the formation of phase-segregated micron-sized rubidium halide crystals. This tolerance to higher loadings of potassium allows us to achieve superior luminescent properties with potassium passivation. We also find that exposure to a humid atmosphere drives phase segregation and grain coalescence for all compositions, with the rubidium-passivated sample showing the highest sensitivity to nonperovskite phase formation. Our work highlights the benefits but also the limitations of these passivation approaches in maximizing both optoelectronic properties and the stability of perovskite films.

| S-EPMC6344034 | biostudies-literature

Quantitative optical assessment of photonic and electronic properties in halide perovskite.

Project description:The development of high efficiency solar cells relies on the management of electronic and optical properties that need to be accurately measured. As the conversion efficiencies increase, there is a concomitant electronic and photonic contribution that affects the overall performances. Here we show an optical method to quantify several transport properties of semiconducting materials and the use of multidimensional imaging techniques allows decoupling and quantifying the electronic and photonic contributions. Example of application is shown on halide perovskite thin film for which a large range of transport properties is given in the literature. We therefore optically measure pure carrier diffusion properties and evidence the contribution of optical effects such as the photon recycling as well as the photon propagation where emitted light is laterally transported without being reabsorbed. This latter effect has to be considered to avoid overestimated transport properties such as carrier mobility, diffusion length or diffusion coefficient.

| S-EPMC6453959 | biostudies-literature

High-performance nanotube-enhanced perovskite photodetectors.

Project description:Organic-inorganic perovskites have already shown a tremendous potential for low-cost light-harvesting devices. Yet, the relatively low carrier mobilities in bulk perovskites still prevent large-area devices with performances competing with state-of-the-art technologies. Here, we tackle this fundamental challenge by incorporating single-wall carbon nanotubes within a perovskite matrix by means of a simple two-step method in ambient air. Using this nano-engineered hybrid film, we demonstrate large-area photodetectors with responsivities up-to 13.8 A.W-1 and a broad spectral response from 300 to 800 nm, indicating that photocurrent generation arises from the charge transfer from the perovskite matrix to the embedded nanotube network. As the nanotubes facilitate the carrier extraction, these photodetectors also show a fast response time of 10 ms. This is significantly faster than most of previous reports on perovskite-based photodetectors, including devices with much smaller photosensitive areas. This approach is also well-suited for large-scale production of other perovskite-based light-harvesting devices.

| S-EPMC5371979 | biostudies-literature

Planar-integrated single-crystalline perovskite photodetectors.

Project description:Hybrid perovskites are promising semiconductors for optoelectronic applications. However, they suffer from morphological disorder that limits their optoelectronic properties and, ultimately, device performance. Recently, perovskite single crystals have been shown to overcome this problem and exhibit impressive improvements: low trap density, low intrinsic carrier concentration, high mobility, and long diffusion length that outperform perovskite-based thin films. These characteristics make the material ideal for realizing photodetection that is simultaneously fast and sensitive; unfortunately, these macroscopic single crystals cannot be grown on a planar substrate, curtailing their potential for optoelectronic integration. Here we produce large-area planar-integrated films made up of large perovskite single crystals. These crystalline films exhibit mobility and diffusion length comparable with those of single crystals. Using this technique, we produced a high-performance light detector showing high gain (above 10(4) electrons per photon) and high gain-bandwidth product (above 10(8) Hz) relative to other perovskite-based optical sensors.

| S-EPMC4667636 | biostudies-literature

Colloidal Synthesis and Optical Properties of Perovskite-Inspired Cesium Zirconium Halide Nanocrystals.

Project description:Optoelectronic devices based on lead halide perovskites are processed in facile ways, yet are remarkably efficient. There are extensive research efforts investigating lead-free perovskite and perovskite-related compounds, yet there are challenges to synthesize these materials in forms that can be directly integrated into thin film devices rather than as bulk powders. Here, we report on the colloidal synthesis and characterization of lead-free, antifluorite Cs2ZrX6 (X = Cl, Br) nanocrystals that are readily processed into thin films. We use transmission electron microscopy and powder X-ray diffraction measurements to determine their size and structural properties, and solid-state nuclear magnetic resonance measurements reveal the presence of oleate ligand, together with a disordered distribution of Cs surface sites. Density functional theory calculations reveal the band structure and fundamental band gaps of 5.06 and 3.91 eV for Cs2ZrCl6 and Cs2ZrBr6, respectively, consistent with experimental values. Finally, we demonstrate that the Cs2ZrCl6 and Cs2ZrBr6 nanocrystal thin films exhibit tunable, broad white photoluminescence with quantum yields of 45% for the latter, with respective peaks in the blue and green spectral regions and mixed systems exhibiting properties between them. Our work represents a critical step toward the application of lead-free Cs2ZrX6 nanocrystal thin films into next-generation light-emitting applications.

| S-EPMC7724740 | biostudies-literature

Single Halide Perovskite/Semiconductor Core/Shell Quantum Dots with Ultrastability and Nonblinking Properties.

Project description:The further practical applications of halide perovskite quantum dots (QDs) are blocked by problems of instability and nonradiative Auger recombination manifested as photoluminescence blinking. Here, single core/shell structured perovskite semiconductor QDs are successfully fabricated by capping CsPbBr3 QD core with CdS shell. It is demonstrated that CsPbBr3/CdS core/shell QDs exhibit ultrahigh chemical stability and nonblinking photoluminescence with high quantum yield due to the reduced electronic traps within the core/shell structure. Efficiency of amplified spontaneous emission exhibits obvious enhancement compared to that of pure CsPbBr3 QDs, originating from the mitigated competition between stimulated emission and suppressed nonradiative biexciton Auger recombination. Furthermore, low-threshold whispering-gallery-mode lasing with a high-quality factor is achieved by incorporating CsPbBr3/CdS QDs into microtubule resonators. Density functional theory (DFT)-based first-principles calculations are also performed to reveal the atomic interface structure, which supports the existence of CsPbBr3/CdS structure. An interesting feature of spatially separated charge density at CsPbBr3/CdS interface is found, which may greatly contribute to the suppressed Auger recombination. The results provide a practical approach to improve the stability and suppress the blinking of halide perovskite QDs, which may pave the way for future applications for various optoelectronic devices.

| S-EPMC6755528 | biostudies-literature

Synthesis and optical properties of lead-free cesium germanium halide perovskite quantum rods.

Project description:Herein, the fabrication of a lead-free cesium germanium halide perovskite produced via a simple solvothermal process is reported for the first time. By tuning the composition of the CsGeX3 quantum rods, a power conversion efficiency of 4.92% under AM 1.5 G was achieved.

| S-EPMC9080572 | biostudies-literature

Sn-Based Perovskite for Highly Sensitive Photodetectors.

Project description:Organic-inorganic hybrid perovskites have emerged as promising functional materials for high-performance photodetectors. However, the toxicity of Pb and the lack of internal gain mechanism in typical perovskites significantly hinder their practical applications. Herein, a low-voltage and high-performance photodetector based on a single layer of lead-free Sn-based perovskite film is reported. The device shows broadband response from ultraviolet to near-infrared light with a responsivity up to 105 A W-1 and a high gain at a low operating voltage. The outstanding performance is attributed to the high hole mobility, p-doping nature, and excellent optoelectronic properties of the Sn-based perovskite. Moreover, the device is assembled on a flexible substrate and demonstrates both high sensitivity and good bending stability. This work demonstrates a route for realizing nontoxic, low-cost, and high-performance perovskite photodetectors with a simple device structure.

| S-EPMC6724360 | biostudies-literature

Lead halide perovskite vortex microlasers.

Project description:Lead halide perovskite microlasers have been very promising for versatile optoelectronic applications. However, most perovskite microlasers are linearly polarized with uniform wavefront. The structured laser beams carrying orbital angular momentum have rarely been studied and the applications of perovskites in next-generation optical communications are thus hindered. Herein, we experimentally demonstrate the perovskite vortex microlasers with highly directional outputs and well-controlled topological charges. High quality gratings have been experimentally fabricated in perovskite film and the subsequent vertical cavity surface emitting lasers (VCSELs) with divergent angles of 3o are achieved. With the control of Archimedean spiral gratings, the wavefront of the perovskite VCSELs has been switched to be helical with topological charges of q = -4 to 4. This research is able to expand the potential applications of perovskite microlasers in hybrid integrated photonic networks, as well as optical computing.

| S-EPMC7519163 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data