Application of X-ray computed tomography to analyze the structure of sorghum grain.
Ontology highlight
ABSTRACT: Background
The structural characteristics of whole sorghum kernels are known to affect end-use quality, but traditional evaluation of this structure is two-dimensional (i.e., cross section of a kernel). Current technology offers the potential to consider three-dimensional structural characteristics of grain. X-ray computed tomography (CT) presents one such opportunity to nondestructively extract quantitative data from grain caryopses which can then be related to end-use quality.Results
Phenotypic measurements were extracted from CT scans of grain sorghum caryopses. Extensive phenotypic variation was found for embryo volume, endosperm hardness, endosperm texture, endosperm volume, pericarp volume, and kernel volume. CT derived estimates were strongly correlated with ground truth measurements enabling the identification of genotypes with superior structural characteristics.Conclusions
Presented herein is a phenotyping pipeline developed to quantify three-dimensional structural characteristics from grain sorghum caryopses which increases the throughput efficiency of previously difficult to measure traits. Adaptation of this workflow to other small-seeded crops is possible providing new and unique opportunities for scientists to study grain in a nondestructive manner which will ultimately lead to improvements end-use quality.
SUBMITTER: Crozier D
PROVIDER: S-EPMC8753924 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:BackgroundWheat is one of the most important staple source in the world for human consumption, animal feed and industrial raw materials. To deal with the global and increasing population demand, enhancing crop yield by increasing the final weight of individual grain is considered as a feasible solution. Morphometric analysis of wheat grain plays an important role in tracking and understanding developmental processes by assessing potential impacts on grains properties, size and shape that are major determinants of final grain weight. X-ray micro computed tomography (μCT) is a very powerful non-invasive imaging tool that is able to acquire 3D images of an individual grain, enabling to assess the morphology of wheat grain and of its different compartments. Our objective is to quantify changes of morphology during growth stages of wheat grain from 3D μCT images.Methods3D μCT images of wheat grains were acquired at various development stages ranging from 60 to 310 degree days after anthesis. We developed robust methods for the identification of outer and inner tissues within the grains, and the extraction of morphometric features using 3D μCT images. We also developed a specific workflow for the quantification of the shape of the grain crease.ResultsThe different compartments of the grain could be semi-automatically segmented. Variations of volumes of the compartments adequately describe the different stages of grain developments. The evolution of voids within wheat grain reflects lysis of outer tissues and growth of inner tissues. The crease shape could be quantified for each grain and averaged for each stage of development, helping us understand the genesis of the grain shape.ConclusionThis work shows that μCT acquisitions and image processing methodologies are powerful tools to extract morphometric parameters of developing wheat grain. The results of quantitative analysis revealed remarkable features of wheat grain growth. Further work will focus on building a computational model of wheat grain growth based on real 3D imaging data.
| S-EPMC6668075 | biostudies-literature
Project description:BackgroundIn bioenergy/forage sorghum, morpho-anatomical stem properties are major components affecting standability and juice yield. However, phenotyping these traits is low-throughput, and has been restricted by the lack of a high-throughput phenotyping platforms that can collect both morphological and anatomical stem properties. X-ray computed tomography (CT) offers a potential solution, but studies using this technology in plants have evaluated limited numbers of genotypes with limited throughput. Here we suggest that using a medical CT might overcome sample size limitations when higher resolution is not needed. Thus, the aim of this study was to develop a practical high-throughput phenotyping and image data processing pipeline that extracts stem morpho-anatomical traits faster, more efficiently and on a larger number of samples.ResultsA medical CT was used to image morpho-anatomical stem properties in sorghum. The platform and image analysis pipeline revealed extensive phenotypic variation for important morpho-anatomical traits in well-characterized sorghum genotypes at suitable repeatability rates. CT estimates were highly predictive of morphological traits and moderately predictive of anatomical traits. The image analysis pipeline also identified genotypes with superior morpho-anatomical traits that were consistent with ground-truth based classification in previous studies. In addition, stem cross section intensity measured by the CT was highly correlated with stem dry-weight density, and can potentially serve as a high-throughput approach to measure stem density in grass stems.ConclusionsThe use of CT on a diverse set of sorghum genotypes with a defined platform and image analysis pipeline was effective at predicting traits such as stem length, diameter, and pithiness ratio at the internode level. High-throughput phenotyping of stem traits using CT appears to be useful and feasible for use in an applied breeding program.
| S-EPMC6043981 | biostudies-literature
Project description:The traits of rice panicles play important roles in yield assessment, variety classification, rice breeding, and cultivation management. Most traditional grain phenotyping methods require threshing and thus are time-consuming and labor-intensive; moreover, these methods cannot obtain 3D grain traits. In this work, based on X-ray computed tomography, we proposed an image analysis method to extract twenty-two 3D grain traits. After 104 samples were tested, the R 2 values between the extracted and manual measurements of the grain number and grain length were 0.980 and 0.960, respectively. We also found a high correlation between the total grain volume and weight. In addition, the extracted 3D grain traits were used to classify the rice varieties, and the support vector machine classifier had a higher recognition accuracy than the stepwise discriminant analysis and random forest classifiers. In conclusion, we developed a 3D image analysis pipeline to extract rice grain traits using X-ray computed tomography that can provide more 3D grain information and could benefit future research on rice functional genomics and rice breeding.
| S-EPMC7706343 | biostudies-literature
Project description:BackgroundWheat spike architecture is a key determinant of multiple grain yield components and detailed examination of spike morphometric traits is beneficial to explain wheat grain yield and the effects of differing agronomy and genetics. However, quantification of spike morphometric traits has been very limited because it relies on time-consuming manual measurements.ResultsIn this study, using X-ray Computed Tomography imaging, we proposed a method to efficiently detect the 3D architecture of wheat spikes and component spikelets by clustering grains based on their Euclidean distance and relative positions. Morphometric characteristics of wheat spikelets and grains, e.g., number, size and spatial distribution along the spike can be determined. Two commercial wheat cultivars, one old, Maris Widgeon, and one modern, Siskin, were studied as examples. The average grain volume of Maris Widgeon and Siskin did not differ, but Siskin had more grains per spike and therefore greater total grain volume per spike. The spike length and spikelet number were not statistically different between the two cultivars. However, Siskin had a higher spikelet density (number of spikelets per unit spike length), with more grains and greater grain volume per spikelet than Maris Widgeon. Spatial distribution analysis revealed the number of grains, the average grain volume and the total grain volume of individual spikelets varied along the spike. Siskin had more grains and greater grain volumes per spikelet from spikelet 6, but not spikelet 1-5, compared with Maris Widgeon. The distribution of average grain volume along the spike was similar for the two wheat cultivars.ConclusionThe proposed method can efficiently extract spike, spikelet and grain morphometric traits of different wheat cultivars, which can contribute to a more detailed understanding of the sink of wheat grain yield.
| S-EPMC7945051 | biostudies-literature
Project description:Wheat is one of the most widely grown crop in temperate climates for food and animal feed. In order to meet the demands of the predicted population increase in an ever-changing climate, wheat production needs to dramatically increase. Spike and grain traits are critical determinants of final yield and grain uniformity a commercially desired trait, but their analysis is laborious and often requires destructive harvest. One of the current challenges is to develop an accurate, non-destructive method for spike and grain trait analysis capable of handling large populations.In this study we describe the development of a robust method for the accurate extraction and measurement of spike and grain morphometric parameters from images acquired by X-ray micro-computed tomography (?CT). The image analysis pipeline developed automatically identifies plant material of interest in ?CT images, performs image analysis, and extracts morphometric data. As a proof of principle, this integrated methodology was used to analyse the spikes from a population of wheat plants subjected to high temperatures under two different water regimes. Temperature has a negative effect on spike height and grain number with the middle of the spike being the most affected region. The data also confirmed that increased grain volume was correlated with the decrease in grain number under mild stress.Being able to quickly measure plant phenotypes in a non-destructive manner is crucial to advance our understanding of gene function and the effects of the environment. We report on the development of an image analysis pipeline capable of accurately and reliably extracting spike and grain traits from crops without the loss of positional information. This methodology was applied to the analysis of wheat spikes can be readily applied to other economically important crop species.
| S-EPMC5664813 | biostudies-other
Project description:An X-ray diffraction computed tomography data-collection strategy that allows, post experiment, a choice between temporal and spatial resolution is reported. This strategy enables time-resolved studies on comparatively short timescales, or alternatively allows for improved spatial resolution if the system under study, or components within it, appear to be unchanging. The application of the method for studying an Mn-Na-W/SiO2 fixed-bed reactor in situ is demonstrated. Additionally, the opportunities to improve the data-collection strategy further, enabling post-collection tuning between statistical, temporal and spatial resolutions, are discussed. In principle, the interlaced scanning approach can also be applied to other pencil-beam tomographic techniques, like X-ray fluorescence computed tomography, X-ray absorption fine structure computed tomography, pair distribution function computed tomography and tomographic scanning transmission X-ray microscopy.
| S-EPMC4815873 | biostudies-other
Project description:X-ray Computed Tomography (CT) is a non-destructive imaging technique originally designed for diagnostic medicine, which was adopted for rhizosphere and soil science applications in the early 1980s. X-ray CT enables researchers to simultaneously visualise and quantify the heterogeneous soil matrix of mineral grains, organic matter, air-filled pores and water-filled pores. Additionally, X-ray CT allows visualisation of plant roots in situ without the need for traditional invasive methods such as root washing. However, one routinely unreported aspect of X-ray CT is the potential effect of X-ray dose on the soil-borne microorganisms and plants in rhizosphere investigations. Here we aimed to i) highlight the need for more consistent reporting of X-ray CT parameters for dose to sample, ii) to provide an overview of previously reported impacts of X-rays on soil microorganisms and plant roots and iii) present new data investigating the response of plant roots and microbial communities to X-ray exposure. Fewer than 5% of the 126 publications included in the literature review contained sufficient information to calculate dose and only 2.4% of the publications explicitly state an estimate of dose received by each sample. We conducted a study involving rice roots growing in soil, observing no significant difference between the numbers of root tips, root volume and total root length in scanned versus unscanned samples. In parallel, a soil microbe experiment scanning samples over a total of 24 weeks observed no significant difference between the scanned and unscanned microbial biomass values. We conclude from the literature review and our own experiments that X-ray CT does not impact plant growth or soil microbial populations when employing a low level of dose (<30 Gy). However, the call for higher throughput X-ray CT means that doses that biological samples receive are likely to increase and thus should be closely monitored.
| S-EPMC3693932 | biostudies-literature
Project description:Historically, micro-computed tomography (μCT) has been considered unsuitable for histologic analysis of unstained formalin-fixed, paraffin-embedded soft tissue biopsy specimens because of a lack of image contrast between the tissue and the paraffin. However, we recently demonstrated that μCT can successfully resolve microstructural detail in routinely prepared tissue specimens. Herein, we illustrate how μCT imaging of standard formalin-fixed, paraffin-embedded biopsy specimens can be seamlessly integrated into conventional histology workflows, enabling nondestructive three-dimensional (3D) X-ray histology, the use and benefits of which we showcase for the exemplar of human lung biopsy specimens. This technology advancement was achieved through manufacturing a first-of-kind μCT scanner for X-ray histology and developing optimized imaging protocols, which do not require any additional sample preparation. 3D X-ray histology allows for nondestructive 3D imaging of tissue microstructure, resolving structural connectivity and heterogeneity of complex tissue networks, such as the vascular network or the respiratory tract. We also demonstrate that 3D X-ray histology can yield consistent and reproducible image quality, enabling quantitative assessment of a tissue's 3D microstructures, which is inaccessible to conventional two-dimensional histology. Being nondestructive, the technique does not interfere with histology workflows, permitting subsequent tissue characterization by means of conventional light microscopy-based histology, immunohistochemistry, and immunofluorescence. 3D X-ray histology can be readily applied to a plethora of archival materials, yielding unprecedented opportunities in diagnosis and research of disease.
| S-EPMC6680277 | biostudies-literature
Project description:Laboratory diffraction contrast tomography (LabDCT) is a novel technique for non-destructive imaging of the grain structure within polycrystalline samples. To further broaden the use of this technique to a wider range of materials, both the spatial resolution and detection limit achieved in the commonly used Laue focusing geometry have to be improved. In this work, the possibility of improving both grain indexing and shape reconstruction was investigated by increasing the sample-to-detector distance to facilitate geometrical magnification of diffraction spots in the LabDCT projections. LabDCT grain reconstructions of a fully recrystallized iron sample, obtained in the conventional Laue focusing geometry and in a magnified geometry, are compared to one characterized by synchrotron X-ray diffraction contrast tomography, with the latter serving as the ground truth. It is shown that grain indexing can be significantly improved in the magnified geometry. It is also found that the magnified geometry improves the spatial resolution and the accuracy of the reconstructed grain shapes. The improvement is shown to be more evident for grains smaller than 40 µm than for larger grains. The underlying reasons are clarified by comparing spot features for different LabDCT datasets using a forward simulation tool.
| S-EPMC8256707 | biostudies-literature
Project description:Cardiovascular computed tomography (CT) is among the most active fields with ongoing technical innovation related to image acquisition and analysis. Artificial intelligence can be incorporated into various clinical applications of cardiovascular CT, including imaging of the heart valves and coronary arteries, as well as imaging to evaluate myocardial function and congenital heart disease. This review summarizes the latest research on the application of deep learning to cardiovascular CT. The areas covered range from image quality improvement to automatic analysis of CT images, including methods such as calcium scoring, image segmentation, and coronary artery evaluation.
| S-EPMC8484158 | biostudies-literature