Browse
Submit Data
Databases
API
Help

Dataset Information

10 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

In vitro and in vivo MRI imaging and photothermal therapeutic properties of Hematite (α-Fe₂O₃) Nanorods.

ABSTRACT: Herein we report synthesis of hematite (α-Fe₂O₃) nanorods by calcinating hydrothermally synthesized goethite nanorods at 5000C. The structural, optical and MRI imaging guided cancer therapeutic properties of fabricated nanorods have been discussed in this manscript. FESEM and TEM imaging techniques were used to confirm the nanorod like morphology of as prepared materials. As we know that Fe₂O₃ nanorods with size in the range of 25-30 nm exhibit super magnetism. After coating with the PEG, the as prepared nanorods can be used as T₂ MR imaging contrast agents. An excellent T₂ MRI contrast of 38.763 mM^-1s^-1 achieved which is highest reported so far for α-Fe₂O₃. Besides the as prepared nanorods display an excellent photothermal conversion efficiency of 39.5% thus acts as an excellent photothermal therapeutic agent. Thus, we envision the idea of testing our nanorods for photothermal therapy and MR imaging application both in vitro and in vivo, achieving an excellent T₂ MRI contrast and photothermal therapy effect with as prepared PEGylated nanorods.

SUBMITTER: Gulzar A

PROVIDER: S-EPMC8755697 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Nano-structural effects on Hematite (α-Fe2O3) nanoparticle radiofrequency heating.

Project description:Nano-sized hematite (α-Fe2O3) is not well suited for magnetic heating via an alternating magnetic field (AMF) because it is not superparamagnetic-at its best, it is weakly ferromagnetic. However, manipulating the magnetic properties of nano-sized hematite (i.e., magnetic saturation (Ms), magnetic remanence (Mr), and coercivity (Hc)) can make them useful for nanomedicine (i.e., magnetic hyperthermia) and nanoelectronics (i.e., data storage). Herein we study the effects of size, shape, and crystallinity on hematite nanoparticles to experimentally determine the most crucial variable leading to enhancing the radio frequency (RF) heating properties. We present the synthesis, characterization, and magnetic behavior to determine the structure-property relationship between hematite nano-magnetism and RF heating. Increasing particle shape anisotropy had the largest effect on the specific adsorption rate (SAR) producing SAR values more than 6 × greater than the nanospheres (i.e., 45.6 ± 3 W/g of α-Fe2O3 nanorods vs. 6.89 W/g of α-Fe2O3 nanospheres), indicating α-Fe2O3 nanorods can be useful for magnetic hyperthermia.

| S-EPMC7940460 | biostudies-literature

Preparation of porous Fe2O3 nanorods-reduced graphene oxide nanohybrids and their excellent microwave absorption properties.

Project description:In this paper, α-Fe2O3 nanoparticles (NPs)-reduced graphene oxide (RGO), α-FeOOH nanorods (NRs)-RGO and porous α-Fe2O3 NRs-RGO could be selectively synthesized by hydrothermal method. The investigations indicated that the obtained α-Fe2O3 NPs, α-FeOOH NRs and porous α-Fe2O3 NRs were either attached on the surface of RGO sheets or coated uniformly by the RGO sheets. And the as-prepared nanohybrids exhibited excellent microwave absorption performance, which was proved to be ascribed to the quarter-wavelength matching model. The optimum reflection loss (RL) values for α-Fe2O3 NPs-RGO, α-FeOOH NRs-RGO and porous α-Fe2O3 NRs-RGO were ca. -32.3, -37.4 and -71.4 dB, respectively. Moreover, compared to the obtained α-Fe2O3 NPs-RGO and α-FeOOH NRs-RGO, the as-prepared porous α-Fe2O3 NRs-RGO nanohybrids exhibited enhanced microwave absorption properties because of their special structure and synergetic effect. The possible enhanced microwave absorption mechanisms were discussed in details. Our results confirmed that the geometrical morphology had a great influence on their microwave absorption properties, which provided a promising approach to exploit high performance microwave absorbing materials.

| S-EPMC5593864 | biostudies-literature

Atomic-Scale Structure of the Hematite ?-Fe2O3(1102) "R-Cut" Surface.

Project description:The ?-Fe2O3(11?02) surface (also known as the hematite r-cut or (012) surface) was studied using low-energy electron diffraction (LEED), X-ray photoelectron spectroscopy (XPS), ultraviolet photoelectron spectroscopy (UPS), scanning tunneling microscopy (STM), noncontact atomic force microscopy (nc-AFM), and ab initio density functional theory (DFT)+U calculations. Two surface structures are stable under ultrahigh vacuum (UHV) conditions; a stoichiometric (1 × 1) surface can be prepared by annealing at 450 °C in ?10-6 mbar O2, and a reduced (2 × 1) reconstruction is formed by UHV annealing at 540 °C. The (1 × 1) surface is close to an ideal bulk termination, and the undercoordinated surface Fe atoms reduce the surface bandgap by ?0.2 eV with respect to the bulk. The work function is measured to be 5.7 ± 0.2 eV, and the VBM is located 1.5 ± 0.1 eV below EF. The images obtained from the (2 × 1) reconstruction cannot be reconciled with previously proposed models, and a new "alternating trench" structure is proposed based on an ordered removal of lattice oxygen atoms. DFT+U calculations show that this surface is favored in reducing conditions and that 4-fold-coordinated Fe2+ cations at the surface introduce gap states approximately 1 eV below EF. The work function on the (2 × 1) termination is 5.4 ± 0.2 eV.

| S-EPMC5823487 | biostudies-literature

α-Fe2O3 Nanoparticles/Vermiculite Clay Material: Structural, Optical and Photocatalytic Properties.

Project description:Photocatalysis is increasingly becoming a center of interest due to its wide use in environmental remediation. Hematite (α-Fe2O3) is one promising candidate for photocatalytic applications. Clay materials as vermiculite (Ver) can be used as a carrier to accommodate and stabilize photocatalysts. Two different temperatures (500 °C and 700 °C) were used for preparation of α-Fe2O3 nanoparticles/vermiculite clay materials. The experimental methods used for determination of structural, optical and photocatalytic properties were X-ray fluorescence (ED-XRF), X-ray diffraction (XRD), scanning electron microscopy (SEM) with energy dispersive X-ray spectrometry (EDS), N2 adsorption method (BET), diffuse reflectance UV-Vis spectroscopy (DRS), photoluminescence spectroscopy (PL) and photocatalytic reduction of CO2, respectively. The data from XRD were confronted with molecular modeling of the material arrangement in the interlayer space of vermiculite structure and the possibility of anchoring the α-Fe2O3 nanoparticles to the surface and edge of vermiculite. Correlations between structural, textural, optical and electrical properties and photocatalytic activity have been studied in detail. The α-Fe2O3 and α-Fe2O3/Ver materials with higher specific surface areas, a smaller crystallite size and structural defects (oxygen vacancies) that a play crucial role in photocatalytic activity, were prepared at a lower calcination temperature of 500 °C.

| S-EPMC6600952 | biostudies-literature

Operando X-ray Absorption Spectroscopy (XAS) Observation of Photoinduced Oxidation in FeNi (Oxy)hydroxide Overlayers on Hematite (α-Fe2O3) Photoanodes for Solar Water Splitting.

Project description:An FeNi (oxy)hydroxide cocatalyst overlayer was photoelectrochemically deposited on a thin-film hematite (α-Fe2O3) photoanode, leading to a cathodic shift of ∼100 mV in the photocurrent onset potential. Operando X-ray absorption spectroscopy (XAS) at the Fe and Ni K-edges was used to study the changes in the overlayer with potential in the dark and under illumination conditions. Potential or illumination only had a minor effect on the Fe oxidation state, suggesting that Fe atoms do not accumulate significant amount of charge over the whole potential range. In contrast, the Ni K-edge spectra showed pronounced dependence on potential in the dark and under illumination. The effect of illumination is to shift the onset for the Ni oxidation because of the generated photovoltage and suggests that holes that are photogenerated in hematite are transferred mainly to the Ni atoms in the overlayer. The increase in the oxidation state of Ni proceeds at potentials corresponding to the redox wave of Ni, which occurs immediately prior to the onset of the oxygen evolution reaction (OER). Linear combination fitting analysis of the obtained spectra suggests that the overlayer does not have to be fully oxidized to promote oxygen evolution. Cathodic discharge measurements show that the photogenerated charge is stored almost exclusively in the Ni atoms within the volume of the overlayer.

| S-EPMC7586389 | biostudies-literature

Photoelectrochemical and crystalline properties of a GaN photoelectrode loaded with α-Fe2O3 as cocatalyst.

Project description:Nitrides are of particular interest in energy applications given their suitability to photocatalytically generate H2 from aqueous solutions. However, one of the drawbacks of nitrides is the decomposition they suffer when used in photoelectrochemical cells. Here, we report the improvement of the catalytic performance and chemical stability of a GaN electrode when it is decorated with Fe2O3 particles compared with an undecorated electrode. Our results show a higher reaction rate in the Fe2O3/GaN electrode, and that photocorrosion marks take more than 20 times longer to appear on it. We also characterized the crystalline properties of the Fe2O3 particles with transmission electron microscopy. The results show that the Fe2O3 particles keep an epitaxial relationship with GaN that follows the Fe2O3[Formula: see text]GaN[Formula: see text] and Fe2O3[Formula: see text]GaN[Formula: see text] symmetry constraints. We also characterized an Fe2O3 (thin film)/GaN electrode, however it did not present any catalytic improvement compared with a bare GaN electrode. The epitaxial relationship found between the Fe2O3 thin film and GaN exhibited the Fe2O3[Formula: see text]GaN[Formula: see text] and Fe2O3[Formula: see text]GaN[Formula: see text] symmetry constraints.

| S-EPMC7387544 | biostudies-literature

Preparation of Hollow Fe2O3 Nanorods and Nanospheres by Nanoscale Kirkendall Diffusion, and Their Electrochemical Properties for Use in Lithium-Ion Batteries.

Project description:A novel process for the preparation of aggregate-free metal oxide nanopowders with spherical (0D) and non-spherical (1D) hollow nanostructures was introduced. Carbon nanofibers embedded with iron selenide (FeSe) nanopowders with various nanostructures are prepared via the selenization of electrospun nanofibers. Ostwald ripening occurs during the selenization process, resulting in the formation of a FeSe-C composite nanofiber exhibiting a hierarchical structure. These nanofibers transform into aggregate-free hollow Fe2O3 powders via the complete oxidation of FeSe and combustion of carbon. Indeed, the zero- (0D) and one-dimensional (1D) FeSe nanocrystals transform into the hollow-structured Fe2O3 nanopowders via a nanoscale Kirkendall diffusion process, thus conserving their overall morphology. The discharge capacities for the 1000th cycle of the hollow-structured Fe2O3 nanopowders obtained from the FeSe-C composite nanofibers prepared at selenization temperatures of 500, 800, and 1000?°C at a current density of 1?A?g-1 are 932, 767, and 544?mA?h g-1, respectively; and their capacity retentions from the second cycle are 88, 92, and 78%, respectively. The high structural stabilities of these hollow Fe2O3 nanopowders during repeated lithium insertion/desertion processes result in superior lithium-ion storage performances.

| S-EPMC5153625 | biostudies-literature

Fe3O4 Nanoparticles Functionalized with Polymer Ligand for T1-Weighted MRI In Vitro and In Vivo.

Project description:Magnetic resonance imaging (MRI) has gained wide interest in early accurate diagnoses due to the high resolution and low toxicity of magnetic nanoparticles. In order to develop potential alternatives of toxic Gd- or Mn-based chelating agents, we report the synthesis of water soluble ultra-small Fe3O4 nanoparticles by a modified co-precipitation method as T1-weighted positive contrast agents. The magnetic iron oxide nanoparticles (MIONs) were functionalized by polymer ligand dodecanthiol-polymethacrylic acid (DDT-PMAA) to enhance their colloidal stability. These MIONs have high longitudinal relaxivity (r1 = 8.18 mM-1·S-1) and exhibited good results in the in vitro and in vivo MR imaging. No toxicity was observed in cytotoxicity assay and histology toxicity analysis. The MIONs@DDT-PMAA(magnetic iron oxide nanoparticles @ dodecanthiol-polymethacrylic acid) present great potential as positive contrast agents for tumor diagnosis.

| S-EPMC6572598 | biostudies-literature

Enhanced Microwave Absorption Properties of ?-Fe?O?-Filled Ordered Mesoporous Carbon Nanorods.

Project description:A novel kind of ?-Fe?O?-filled ordered mesoporous carbon nanorods has been synthesized by a facial hydrothermal method. Compared with dendritic ?-Fe?O? micropines, both a broader effective absorption range-from 10.5 GHz to 16.5 GHz with reflection loss (RL) less than -10 dB-and a thinner matching thickness of 2.0 mm have been achieved in the frequency range 2-18 GHz. The enhanced microwave absorption properties evaluated by the RL are attributed to the enhanced dielectric loss resulting from the intrinsic physical properties and special structures.

| S-EPMC5452305 | biostudies-literature

Increased Active Sites on Irregular Morphological ?-Fe2O3 Nanorods for Enhanced Photoelectrochemical Performance.

Project description:Uniform rectangular ?-Fe2O3 nanorods (R-Fe2O3) and irregular ?-Fe2O3 nanorods (D-Fe2O3) with a random size vertically aligned on fluorine-doped tin oxide were prepared with a facile one-step hydrothermal procedure. X-ray diffraction (XRD) measurements and Raman spectra confirm that the obtained samples are ?-Fe2O3, and XRD patterns show that D-Fe2O3 has two extra (012) and (104) planes of hematite in addition to the identical peaks to R-Fe2O3. The carrier density of the D-Fe2O3 sample is four times larger than that of R-Fe2O3. Finally, the D-Fe2O3 photoelectrode exhibited a better photoelectrochemical (PEC) performance under visible illumination than that of R-Fe2O3, achieving the photocurrent density of 0.15 mA cm-2 at 1.23 V versus reversible hydrogen electrode. In addition, incident photo-to-current conversion efficiency of D-Fe2O3 is nearly three times larger than that of R-Fe2O3. Hence, the improved PEC performance of D-Fe2O3 can be ascribed to higher carrier density resulting from the amount of oxygen vacancies and more activated exposed surface facets.

| S-EPMC7271369 | biostudies-literature