Selective ligand removal to improve accessibility of active sites in hierarchical MOFs for heterogeneous photocatalysis.
Ontology highlight
ABSTRACT:
SUBMITTER: Naghdi S
PROVIDER: S-EPMC8755752 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:A long-term exposition of antibiotics represents a serious problem for the environment, especially for human health. Heterogeneous photocatalysis opens a green way for their removal. Here, we correlated the structural-textural properties of TiO2 photocatalysts with their photocatalytic performance in ampicillin abatement. The tested nanoparticles included anatase and rutile and their defined mixtures. The nominal size range varied from 5 to 800 nm, Aeroxide P25 serving as an industrial benchmark reference. The degradation mechanism of photocatalytic ampicillin abatement was studied by employing both experimental (UPLC/MS/MS, hydroxyl radical scavenger) and theoretical (quantum calculations) approaches. Photocatalytic activity increased with the increasing particle size, generally, anatase being more active than rutile. Interestingly, in the dark, the ampicillin concentration decreased as well, especially in the presence of very small nanoparticles. Even if the photolysis of ampicillin was negligible, a very high degree of mineralization of antibiotic was achieved photocatalytically using the smallest nanoparticles of both allotropes and their mixtures. Furthermore, for anatase samples, the reaction rate constant increases with increasing crystallite size, while the degree of mineralization decreases. Importantly, the suggested degradation pathway mechanism determined by DFT modeling was in very good agreement with experimentally detected reaction products.
| S-EPMC8399517 | biostudies-literature
Project description:We report a new strategy for the synthesis of robust hierarchical micro- and mesoporous MOFs from water stable MOFs via a selective acid etching process. The process is controlled by the size-selective diffusion of acid molecules through the MOF windows. This method enables the fine-tuning of the porosity of hierarchical MOFs, allowing for the generation of well-defined mesopores with high mesopore volume. Because of the size-selective diffusion of acid molecules, the inherent crystallinity and external morphology of the resulting MOFs are well-maintained after acid treatment. This novel strategy may provide an alternative route towards the synthesis of diverse hierarchical MOFs.
| S-EPMC5643979 | biostudies-literature
Project description:The elimination of heavy metals, especially lead, from wastewater is vital for the environment and human health and using a proper adsorbent to achieve this goal is highly desirable. Initially, Fe-THC MOF was prepared using a simple method and functionalized using MXene for efficient, rapid, and selective elimination of lead. Different characterization tools demonstrated that Fe-THC MOF and its composite Fe-THC/MXene were successfully prepared. The adsorption outcomes showed that the maximum sorption capability was 674 mg g-1 at 305 K and pH 4.5. The sorption kinetics obeys the pseudo-second-order kinetic model, and the sorption isotherms fit the Langmuir isotherm model. This finding suggests monolayer sorption on Fe-THC/MXene, and the rate-controlling step is chemisorption. Thermodynamic findings exhibit that sorption was a spontaneous and exothermic process. The sorption process can selectively adsorb Pb ions from aqueous media. After five adsorption-desorption tests, the adsorption efficiency of Fe-THC/MXene was still high. The sorption mechanism of lead on Fe-THC was mainly due to the interaction of lead ions with -F and -O ions and porosity of the Fe-THC/MXene composite. The -O and -F ions were derived from MXene, while the porosity was derived from the MOFs of composites. These findings confirmed that Fe-THC/MXene enables rapid, efficient, and selective elimination of lead from wastewater, which is of practical importance.
| S-EPMC9930097 | biostudies-literature
Project description:The ever-increasing landscape of heterogeneous catalysis, pure and applied, utilizes many different catalysts. Academic insights along with many industrial adaptations paved the way for the growth. In designing a catalyst, it is desirable to have a priori knowledge of what structure needs to be targeted to help in achieving the goal. When focusing on catalysis, one needs to cope with a vast corpus of knowledge and information. The overwhelming desire to exploit catalysis toward commercial ends is irresistible. In today's world, one of the requirements of developing a new catalyst is to address the environmental concerns. The well-established heterogeneous catalysts have microporous structures (<25 Å), which find use in many industrial processes. The metal-organic framework (MOF) compounds, being pursued vigorously during the last two decades, have similar microporosity with well-defined pores and channels. The MOFs possess large surface area and assemble to delicate structural and compositional variations either during the preparation or through postsynthetic modifications (PSMs). The MOFs, in fact, offer excellent scope as simple Lewis acidic, Brönsted acidic, Lewis basic, and more importantly bifunctional (acidic as well as basic) agents for carrying out catalysis. The many advances that happened over the years in biology helped in the design of many good biocatalysts. The tools and techniques (advanced preparative approaches coupled with computational insights), on the other hand, have helped in generating interesting and good inorganic catalysts. In this review, the recent advances in bifunctional catalysis employing MOFs are presented. In doing so, we have concentrated on the developments that happened during the past decade or so.
| S-EPMC10853920 | biostudies-literature
Project description:The exploration of novel porous core-shell materials is of great significance because of their prospectively improved performance and extensive applications in separation, energy conversion, and catalysis. Here, mesoporous metal-organic frameworks (MOFs) NH2-MIL-101(Fe) as a core generate a shell with mesoporous covalent organic frameworks (COFs) NUT-COF-1(NTU) by a covalent linking process, the composite NH2-MIL-101(Fe)@NTU keeping retentive crystallinity with hierarchical porosity well. Importantly, the NH2-MIL-101(Fe)@NTU composite shows significantly enhanced catalytic conversion and selectivity during styrene oxidation. It is mainly due to the hydrophilic MOF nanocrystals readily gathering the hydrophobic reactants styrene and boosting the radical mechanism path after combining the hydrophobic COFs shell. The synthetic strategy in this systematic study develops a new rational design for the synthesis of other core-shell MOF/COF-based hybrid materials, which can expand the promising applications.
| S-EPMC6468976 | biostudies-literature
Project description:The synergy between photocatalysis and continuous flow chemical reactors has shifted the paradigms of photochemistry, opening new avenues of research with safer and scalable processes that can be readily implemented in academia and industry. Current state-of-the-art photocatalysts are homogeneous transition metal complexes that have favourable photophysical properties, wide electrochemical redox potentials, and photostability. However, these photocatalysts present serious drawbacks, such as toxicity, limited availability, and the overall cost of rare transition metal elements. This reduces their long-term viability, especially at an industrial scale. Heterogeneous photocatalysts (HPCats) are an attractive alternative, as the requirement for the separation and purification is largely removed, but typically at the cost of efficiency. Flow chemical reactors can, to a large extent, mitigate the loss in efficiency through reactor designs that enhance mass transport and irradiation. Herein, we review some important developments of heterogeneous photocatalytic materials and their application in flow reactors for sustainable organic synthesis. Further, the application of continuous flow heterogeneous photocatalysis in environmental remediation is briefly discussed to present some interesting reactor designs that could be implemented to enhance organic synthesis.
| S-EPMC7323633 | biostudies-literature
Project description:Photocatalytic air purification is widely regarded as a promising technology, but it calls for more efficient photocatalytic materials and systems. Here we report a strategy to introduce an in-situ water (self-wetting) layer on WO3 by coating hygroscopic periodic acid (PA) to dramatically enhance the photocatalytic removal of hydrophilic volatile organic compounds (VOCs) in air. In ambient air, water vapor is condensed on WO3 to make a unique tri-phasic (air/water/WO3) system. The in-situ formed water layer selectively concentrates hydrophilic VOCs. PA plays the multiple roles as a water-layer inducer, a surface-complexing ligand enhancing visible light absorption, and a strong electron acceptor. Under visible light, the photogenerated electrons are rapidly scavenged by periodate to produce more •OH. PA/WO3 exhibits excellent photocatalytic activity for acetaldehyde degradation with an apparent quantum efficiency of 64.3% at 460 nm, which is the highest value ever reported. Other hydrophilic VOCs like formaldehyde that are readily dissolved into the in-situ water layer on WO3 are also rapidly degraded, whereas hydrophobic VOCs remain intact during photocatalysis due to the "water barrier effect". PA/WO3 successfully demonstrated an excellent capacity for degrading hydrophilic VOCs selectively in wide-range concentrations (0.5-700 ppmv).
| S-EPMC8556241 | biostudies-literature
Project description:6:2 fluorotelomer sulfonate (6:2 FtS) is being widely used as a mist suppressant in the chromate (Cr(vi)) plating process. As a result, it is often present alongside Cr(vi) in the chromate plating wastewater (CPW). While the removal of Cr(vi) from CPW has been studied for decades, little attention has been paid to the treatment of 6:2 FtS. In this study, the removal of Cr(vi) and 6:2 FtS by Ga2O3, In2O3, and TiO2 photocatalysts was investigated. In the Ga2O3/UVC system, over 95% of Cr(vi) was reduced into Cr(iii) after only 5 min. Simultaneously, 6:2 FtS was degraded into F- and several perfluorocarboxylates. The predominant reactive species responsible for the degradation of 6:2 FtS in the Ga2O3 system were identified to be hVB + and O2˙-. In addition, it was observed that the presence of Cr(vi) helped accelerate the degradation of 6:2 FtS. This synergy between Cr(vi) and 6:2 FtS was attributable to the scavenging of eCB - by Cr(vi), which retarded the recombination of eCB - and hVB +. The In2O3/UVC system was also capable of removing Cr(vi) and 6:2 FtS, although at significantly slower rates. In contrast, poor removal of 6:2 FtS was achieved with the TiO2/UVC system, because Cr(iii) adsorbed on TiO2 and inhibited its reactivity. Based on the results of this study, it is proposed that CPW can be treated by a treatment train that consists of an oxidation-reduction step driven by Ga2O3/UVC, followed by a neutralization step that converts dissolved Cr(iii) into Cr(OH)3(S).
| S-EPMC9043800 | biostudies-literature
Project description:Metronidazole (MET) is a commonly detected contaminant in the environment. The compound is classified as poorly biodegradable and highly soluble in water. Heterogeneous photocatalysis is the most promoted water purification method due to the possibility of using sunlight and small amounts of a catalyst needed for the process. The aim of this study was to select conditions for photocatalytic removal of metronidazole from aquatic samples. The effect of catalyst type, mass, and irradiance intensity on the efficiency of metronidazole removal was determined. For this purpose, TiO2, ZnO, ZrO2, WO3, PbS, and their mixtures in a mass ratio of 1:1 were used. In this study, the transformation products formed were identified, and the mineralization degree of compound was determined. The efficiency of metronidazole removal depending on the type of catalyst was in the range of 50-95%. The highest MET conversion (95%) combined with a high degree of mineralization (70.3%) was obtained by using a mixture of 12.5 g TiO2-P25 + PbS (1:1; v/v) and running the process for 60 min at an irradiance of 1000 W m-2. Four MET degradation products were identified by untargeted analysis, formed by the rearrangement of the metronidazole and the C-C bond breaking.
| S-EPMC8708392 | biostudies-literature
Project description:Graphene oxide/metal-organic frameworks (GO/MOFs) have been prepared via solvothermal synthesis with ferrous sulfate heptahydrate, zirconium acetate and terephthalic acid for the purpose of removing organic pollutants from wastewater. The composites were analyzed using scanning electron microscopy, infrared spectrometry, and XRD. Tetracycline hydrochloride and orange II were implemented as model pollutants to evaluate the efficacy of the GO/MOFs in water purification, in which 50 mg of Zr/Fe-MOFs/GO was mixed with 100 mL of 10 mg/L, 20 mg/L, 30 mg/L, or 50 mg/L tetracycline hydrochloride solution and 25 mg/L, 35 mg/L, 45 mg/L, or 60 mg/L orange II solution, respectively. The removal efficacy after 4 hours was determined to be 96.1%, 75.8%, 55.4%, and 30.1%, and 98.8%, 91.9%, 71.1%, and 66.2%, respectively. The kinetics of pollutant removal was investigated for both tetracycline hydrochloride and orange II and excellent correlation coefficients of greater than 0.99 were obtained. The high efficacy of these MOFs in pollutant removal, coupled with their inexpensive preparation indicates the feasibility of their implementation in strategies for treating waste liquid. As such, it is anticipated that Zr/Fe-MOFs/GO composites will be widely applied in wastewater purification.
| S-EPMC8266086 | biostudies-literature