Browse
Submit Data
Databases
API
Help

Dataset Information

14 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Effective Dehydration of Fructose Over Stable Ti-Doped SBA-15 Catalysts.

ABSTRACT: High-effective synthesis of 5-hydroxymethylfurfural (HMF) from carbohydrates is an interesting reaction among biomass valorization. The as-synthesized Ti-SBA-15 catalysts with mesoporous structures showed high catalytic efficiency for the conversion of fructose to HMF. Ti-SBA-15 catalysts with different Si/Ti ratios were characterized by characterization techniques such as elemental analysis, XRD, TEM, N₂ adsorption-desorption, NH₃-TPD, and pyridine-FTIR. The acidity of Ti-SBA-15 catalysts could be tuned by altering addition amount of titanium. The effects of reaction conditions, including reaction time, temperature, and amount of catalyst, on the conversions of fructose and the yields of HMF were also investigated. It is found that Ti-SBA-15 catalysts whose Si/Ti ratio is 120 gave the best yields of HMF, which demonstrated 100% conversion of fructose with a maximum HMF yield of 82% at 140°C after 1 h. In addition, its catalytic performance was retained after 5 recycles in fructose conversion reaction, proving its good catalytic stability.

SUBMITTER: Zhu Y

PROVIDER: S-EPMC8769218 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Catalytic Dehydration of Fructose to 5-Hydroxymethylfurfural in Aqueous Medium over Nb2O5-Based Catalysts.

Project description:The catalytic dehydration of fructose to 5-hydroxymethylfurfural (HMF) in water was performed in the presence of pristine Nb2O5 and composites containing Nb and Ti, Ce or Zr oxides. In all experiments, fructose was converted to HMF using water as the solvent. The catalysts were characterized by powder X-ray diffraction, scanning electron microscopy, N2 physical adsorption, infrared and Raman spectroscopy and temperature-programmed desorption of NH3. Experimental parameters such as fructose initial concentration, volume of the reacting suspension, operation temperature, reaction time and amount of catalyst were tuned in order to optimize the catalytic reaction process. The highest selectivity to HMF was ca. 80% in the presence of 0.5 g·L-1 of bare Nb2O5, Nb2O5-TiO2 or Nb2O5-CeO2 with a maximum fructose conversion of ca. 70%. However, the best compromise between high conversion and high selectivity was reached by using 1 g·L-1 of pristine Nb2O5. Indeed, the best result was obtained in the presence of Nb2O5, with a fructose conversion of 76% and a selectivity to HMF of 75%, corresponding to the highest HMF yield (57%). This result was obtained at a temperature of 165° in an autoclave after three hours of reaction by using 6 mL of 1 M fructose suspension with a catalyst amount equal to 1 g·L-1.

| S-EPMC8308375 | biostudies-literature

SBA-15 Mesoporous Silica as Catalytic Support for Hydrodesulfurization Catalysts-Review.

Project description:SBA-15 is an interesting mesoporous silica material having highly ordered nanopores and a large surface area, which is widely employed as catalyst supports, absorbents, drug delivery materials, etc. Since it has a lack of functionality, heteroatoms and organic functional groups have been incorporated by direct or post-synthesis methods in order to modify their functionality. The aim of this article is to review the state-of-the-art related to the use of SBA-15-based mesoporous systems as supports for hydrodesulfurization (HDS) catalysts.

| S-EPMC5452652 | biostudies-other

Cooperative Catalysis of Methane Oxidation through Modulating the Stabilization of PdO and Electronic Properties over Ti-Doped Alumina-Supported Palladium Catalysts.

Project description:Poor low-temperature catalytic activity and durability are the main drawbacks of palladium-based catalysts for methane combustion. Herein, stable and active PdO particles are constructed by incorporating Ti into an alumina support, which makes the catalysts exhibit satisfactory methane combustion activity. The results of comprehensive characterization reveal that an appropriate amount of Ti doping induces the optimization of electron transfer and distribution, thus contributing to the construction and stabilization of active PdO lattices. The reactive oxygen mobility is improved and the optimal PdO/Pd0 combination is achieved, thanks to the amplified PdO-support interaction. In addition, the acid-base properties are regulated and Brønsted acid sites are generated by virtue of the adjustment of electronic properties, which facilitate stabilization of PdO as well. Hence, the Ti-containing catalyst exhibits superior activity for methane oxidation at low temperatures. Notably, the activity and cyclic performance of the catalyst can be further enhanced when undergoing long-term and isothermal heat treatment under the reactant stream and methane, and it demonstrates a high performance with 90% CH4 conversion at 340 °C.

| S-EPMC6854561 | biostudies-literature

Bi-stable resistive switching characteristics in Ti-doped ZnO thin films.

Project description:Ti-doped ZnO (ZnO/Ti) thin films were grown on indium tin oxide substrates by a facile electrodeposition route. The morphology, crystal structure and resistive switching properties were examined, respectively. The morphology reveals that grains are composed of small crystals. The (002) preferential growth along c-axis of ZnO/Ti could be observed from structural analysis. The XPS study shows the presence of oxygen vacancies in the prepared films. Typical bipolar and reversible resistance switching effects were observed. High ROFF/RON ratios (approximately 14) and low operation voltages within 100 switching cycles are obtained. The filament theory and the interface effect are suggested to be responsible for the resistive switching phenomenon.

| S-EPMC3623890 | biostudies-literature

Activation of Ethanol Transformation on Copper-Containing SBA-15 and MnSBA-15 Catalysts by the Presence of Oxygen in the Reaction Mixture.

Project description:The aim of this study was to get insight into the pathway of the acetaldehyde formation from ethanol (the rate-limiting step in the production of 1,3-butadiene) on Cu-SBA-15 and Cu-MnSBA-15 mesoporous molecular sieves. Physicochemical properties of the catalysts were investigated by XRD, N2 ads/des, Uv-vis, XPS, EPR, pyridine adsorption combined with FTIR, 2-propanol decomposition and 2,5-hexanedione cyclization and dehydration test reactions. Ethanol dehydrogenation to acetaldehyde (without and with oxygen) was studied in a flow system using the FTIR technique. In particular, the effect of Lewis acid and basic (Lewis and BrØnsted) sites, and the oxygen presence in the gas reaction mixture with ethanol on the activity and selectivity of copper catalysts, was assessed and discussed. Two different reaction pathways have been proposed depending on the reaction temperature and the presence or absence of oxygen in the flow of the reagents (via ethoxy intermediate way at 593 K, in ethanol flow, or ethoxide intermediate way at 473 K in the presence of ethanol and oxygen in the reaction mixture).

| S-EPMC9916688 | biostudies-literature

Catalytic Low-Temperature Dehydration of Fructose to 5-Hydroxymethylfurfural Using Acidic Deep Eutectic Solvents and Polyoxometalate Catalysts.

Project description:HMF synthesis typically requires high temperature and is carried out in aqueous solutions. In this work, the low-temperature dehydration of fructose to HMF in different deep eutectic solvents (DES) was investigated. We found a very active and selective reaction system consisting of the DES tetraethyl ammonium chloride as hydrogen bond acceptor (HBA) and levulinic acid as hydrogen bond donor (HBD) in a molar ratio of 1:2 leading to a maximum HMF yield of 68% after 120 h at 323 K. The DES still contained a low amount of water at the initial reaction, and water was also produced during the reaction. Considering the DES properties, neither the molar ratio in the DES nor the reaction temperature had a significant influence on the overall performance of the reaction system. However, the nature of the HBA as well as the acidity of the HBD play an important role for the maximum achievable HMF yield. This was validated by measured yields in a DES with different combinations of HBD (levulinic acid and lactic acid) and HBA (choline chloride and tetra-n-alkyl ammonium chlorides). Moreover, addition of vanadium containing catalysts, especially the polyoxometalate HPA-5 (H8PV5Mo7O40) leads to drastically increased reaction kinetics. Using HPA-5 and the DES tetraethyl ammonium chloride-levulinic acid we could reach a maximum HMF yield of 57% after only 5 h reaction time without decreasing the very high product selectivity.

| S-EPMC6794411 | biostudies-literature

Niobium phosphotungstates: excellent solid acid catalysts for the dehydration of fructose to 5-hydroxymethylfurfural under mild conditions.

Project description:The efficient conversion of carbohydrates to 5-hydroxymethylfurfural (5-HMF) under mild conditions represents a very attractive and promising method of producing important building blocks. In this work, niobium phosphotungstates, with Nb/P molar ratios of 0.6, 1.0, 2.0 and 4.0 (NbPW-06, NbPW-1, NbPW-2, and NbPW-4, respectively) have been prepared by a facile, one-pot, alcohol-mediated thermal process and used for the direct conversion of fructose to 5-HMF. By adding a certain amount of Nb, the surface of the catalyst became enriched in P, and this enrichment was associated with the presence of surface P-OH groups that offered Brønsted acid sites that can activate superficial hydrogen species to facilitate 5-HMF generation. Pyridine-FTIR confirmed the presence of Brønsted and Lewis acid sites, which might play important roles in the dehydration of fructose to 5-HMF. Furthermore, polar aprotic solvents were well-suited for the conversion, and higher yields of 5-HMF were obtained in polar aprotic solvents than in nonpolar solvents. A 5-HMF yield of 96.7% with complete fructose consumption was obtained over NbPW-06 in DMSO at 80 °C after 90 min. In addition, NbPW-06 could be recycled several times without a significant decrease in the catalytic activity. A catalytic mechanism for this reaction was proposed. Moreover, this catalytic system can also be utilized for the dehydration of sucrose and inulin to 5-HMF in satisfactory yields. This study establishes an important platform for the further design of Nb-containing catalysts for the production of 5-HMF from carbohydrates under mild conditions.

| S-EPMC9086268 | biostudies-literature

Alkali Earth Catalysts Based on Mesoporous MCM-41 and Al-SBA-15 for Sulfone Removal from Middle Distillates.

Project description:Mg, Ca, and Ba catalysts supported on structured mesoporous silica oxides types MCM-41 and Al-SBA-15 were synthesized and investigated in sulfone cracking for sulfur removal from oxidized diesel fuel. Functional materials and catalysts were characterized by low-temperature nitrogen adsorption/desorption, transmission electron microscopy, and inductively coupled plasma atomic emission spectroscopy techniques. Catalytic tests were carried out in fixed-bed and batch reactors with a model compound dibenzothiophene sulfone and oxidized diesel fraction as a feed. MgO/MCM-41 and MgO/Al-MCM-41 possess high activity in sulfone cracking. The sulfur content in the diesel fraction decreases from initial 450 up to 100 ppmw. Catalysts can be regenerated for reuse in several cycles and may be potentially scaled up for industrial applications.

| S-EPMC6690565 | biostudies-literature

Enhanced sintering resistance of bimetal/SBA-15 catalysts with promising activity under a low temperature for CO methanation.

Project description:According to its thermodynamic equilibrium analysis and strong exothermic characteristics, the major challenge of syngas methanation is to develop a high-efficient low-temperature catalyst with superior sintering resistance. In this study, bimetal-based SBA-15 catalysts were prepared via a citric acid-assisted impregnation method and applied in CO methanation. The obtained catalysts were characterized via X-ray diffraction, N2 adsorption-desorption, high-resolution transmission electron microscopy, X-ray photoelectron spectroscopy, H2 temperature-programmed reduction and other techniques. Combining the structural characterization of the fresh and used catalyst, the function of the organic additive and metal promoters was revealed. The catalysts exhibited superior low-temperature activity and excellent sintering resistance owing to the electron migration from the additive metal to Ni, strong interaction between the metal and support and the confinement effect of the support. The catalyst with Mo as a promotor exhibited the best dispersion and the largest surface concentration of nickel, which resulted in its highest catalytic activity among the catalysts. The design and preparation of a highly effective catalyst can provide novel insight into the preparation of other catalysts.

| S-EPMC9054305 | biostudies-literature

Stable complete methane oxidation over palladium based zeolite catalysts.

Project description:Increasing the use of natural gas engines is an important step to reduce the carbon footprint of mobility and power generation sectors. To avoid emissions of unburnt methane and the associated severe greenhouse effect of lean-burn engines, the stability of methane oxidation catalysts against steam-induced sintering at low temperatures (<500?°C) needs to be improved. Here we demonstrate how the combination of catalyst development and improved process control yields a highly efficient solution for complete methane oxidation. We design a material based on palladium and hierarchical zeolite with fully sodium-exchanged acid sites, which improves the support stability and prevents steam-induced palladium sintering under reaction conditions by confining the metal within the zeolite. Repeated short reducing pulses enable the use of a highly active transient state of the catalyst, which in combination with its high stability provides excellent performance without deactivation for over 90?h in the presence of steam.

| S-EPMC6026177 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data