Browse
Submit Data
Databases
API
Help

Dataset Information

21 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

DEM modelling of railway ballast using the Conical Damage Model: a comprehensive parametrisation strategy

ABSTRACT: Despite ongoing research, the parametrisation of a DEM model is a challenging task, as it depends strongly on the particle shape representation used, particle-particle contact law and the simulated applications: for railway ballast e.g. lab tests or track conditions. The authors previously modelled railway ballast with a DEM model using a simple particle shape. The DEM model was parametrised, by trial-and-error, to compression and direct shear test results. A good agreement between DEM model and experimental results was achieved only when the Conical Damage Model (CDM) was used as the contact law. Compared to the well-known linear-spring Cundall-Strack law or the Hertz-Mindlin law, this contact law takes into account additional physical effects (e.g. edge breakage) occurring in the experiment. Little is known on the influence of the CDM model parameters on the simulation results or on possible parameter ambiguities. This lack of knowledge hinders a reliable and efficient parametrisation of DEM models using different particle shapes. Both points are addressed in this work in detail by investigating a DEM model for railway ballast using one simple particle shape. Suggestions for a parametrisation strategy of reduced computational effort are formulated and tested using a second particle shape. In future works, the newly presented parametrisation strategy can help to calibrate different DEM models and to study the influence of particle shape.

SUBMITTER: Suhr B

PROVIDER: S-EPMC8786779 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Parametrisation of a DEM model for railway ballast under different load cases.

Project description:The prediction quality of discrete element method (DEM) models for railway ballast can be expected to depend on three points: the geometry representation of the single particles, the used contact models and the parametrisation using principal experiments. This works aims at a balanced approach, where none of the points is addressed with excessive depth. In a first step, a simple geometry representation is chosen and the simplified Hertz-Mindlin contact model is used. When experimental data of cyclic compression tests and monotonic direct shear tests are considered, the model can be parametrised to fit either one of the two tests, but not both with the same set of parameters. Similar problems can be found in literature for monotonic and cyclic triaxial tests of railway ballast. In this work, the comparison between experiment and simulation is conducted using the entire data of the test, e.g. shear force over shear path curve from the direct shear test. In addition to a visual comparison of the results also quantitative errors based on the sum of squares are defined. To improve the fit of the DEM model to both types of experiments, an extension on the Hertz-Mindlin contact law is used, which introduces additional physical effects (e.g. breakage of edges or yielding). This model introduces two extra material parameters and is successfully parametrised. Using only one set of parameters, the results of the DEM simulation are in good accordance with both experimental cyclic compression test and monotonic directs shear test.

| S-EPMC5539330 | biostudies-other

Simple particle shapes for DEM simulations of railway ballast: influence of shape descriptors on packing behaviour.

Project description:AbstractIn any DEM simulation, the chosen particle shape will greatly influence the simulated material behaviour. For a specific material, e.g. railway ballast, it remains an open question how to model the particle shape, such that DEM simulations are computationally efficient and simulation results are in good accordance with measurements. While DEM shape modelling for railway ballast is well addressed in the literature, approaches mainly aim at approximating the stones' actual shape, resulting in rather complex and thus inefficient particle shapes. In contrast, very simple DEM shapes will be constructed, clumps of three spheres, which aim to approximate shape descriptors of the considered ballast material. In DEM simulations of the packing behaviour, a set of clump shapes is identified, which can pack at porosities observed at track sites, as well as in lab tests. The relation between particle shape (descriptors) and obtained packing (characteristic) is investigated in a correlation analysis. The simulated packing's porosity is strongly correlated to four shape descriptors, which are also strongly correlated among each other. Thus, to derive simple shape models of a given particle shape, matching one of these shape descriptors, might be a good first step to bring simulated porosities closer to measured ones. The conducted correlation analysis also shows that packing's coordination number and isotropic fabric are correlated to more shape descriptors, making it more difficult to estimate the effect of particle shape on these quantities.Graphic abstract

| S-EPMC7093080 | biostudies-literature

HRSBallast: A high-resolution dataset featuring scanned angular, semi-angular and rounded railway ballast.

Project description:A high-resolution dataset of digitally scanned railway ballast (HRSBallast) is presented, consisting of 108 individual, digitised samples. The ballast samples were sourced from both a railway test track section located on a heavy haul coal export line in South Africa and a local quarry. The sampled ballast from the field installation represent angular, semi-angular and rounded geometric features depending on the sampled location. The fresh ballast sourced from the quarry was iteratively tested using a hydraulic actuator in a small-scale box test which forms part of a separate research project. The ballast samples were scanned before and after every test to ascertain the changes in geometry, in addition to the loss of material due to attrition. The field and laboratory samples were digitised using a high-resolution, commercial (Visual Simultaneous Localization and Mapping) VSLAM-based scanner with a 40-micrometre accuracy. Samples which were fractured by the hydraulic actuator are also included in the dataset. HRSBallast serves as a reference dataset for granular media (GM) simulations utilizing DEM (discrete element method), degradation or wear modelling, digital assets for the creation of synthetic datasets for deep learning applications, embedded railway instrumentation and video games requiring high-resolution geometry.

| S-EPMC7649607 | biostudies-literature

Modelling bacterial twitching in fluid flows: a CFD-DEM approach.

Project description:Bacterial habitats are often associated with fluid flow environments. Bacterial twitching is important for initial bacterial colonization and biofilm formation. The existing research about bacteria twitching is largely experimental orientated. There is a lack of models of twitching motility of bacteria in shear flows, which could provide fundamental understanding about how bacterial twitching would be affected by bacteria associated properties such as number of pili and their distribution on the cell body and environmental factors such as flow and surface patterns. In this work, a three-dimensional modelling approach of Computational Fluid Dynamics (CFD) coupled with the Discrete Element Method (DEM) proposed to study bacterial twitching on flat and groove surfaces under shear flow conditions. Rod-shaped bacteria are modelled as groups of spherical particles and Type IV pili attached to bacteria are modelled as dynamic springs which can elongate, retract, attach and detach. The CFD-DEM model of rod-shape bacteria is validated against orbiting of immotile bacteria in shear flows. The effects of fluid flow rate and surface topography on twitching motility are studied. The model can successfully predict upstream twitching motility of rod-shaped bacteria in shear flows. Our model can predict that there would be an optimal range of wall shear stress in which bacterial upstream twitching is most efficient. The results also indicate that when bacteria twitch on groove surfaces, they are likely to accumulate around the downstream side of the groove walls.

| S-EPMC6787227 | biostudies-literature

Temporal modelling of ballast water discharge and ship-mediated invasion risk to Australia.

Project description:Biological invasions have the potential to cause extensive ecological and economic damage. Maritime trade facilitates biological invasions by transferring species in ballast water, and on ships' hulls. With volumes of maritime trade increasing globally, efforts to prevent these biological invasions are of significant importance. Both the International Maritime Organization and the Australian government have developed policy seeking to reduce the risk of these invasions. In this study, we constructed models for the transfer of ballast water into Australian waters, based on historic ballast survey data. We used these models to hindcast ballast water discharge over all vessels that arrived in Australian waters between 1999 and 2012. We used models for propagule survival to compare the risk of ballast-mediated propagule transport between ecoregions. We found that total annual ballast discharge volume into Australia more than doubled over the study period, with the vast majority of ballast water discharge and propagule pressure associated with bulk carrier traffic. As such, the ecoregions suffering the greatest risk are those associated with the export of mining commodities. As global marine trade continues to increase, effective monitoring and biosecurity policy will remain necessary to combat the risk of future marine invasion events.

| S-EPMC4448877 | biostudies-literature

Modelling lifespan reduction in an exogenous damage model of generic disease.

Project description:We model the effects of disease and other exogenous damage during human aging. Even when the exogenous damage is repaired at the end of acute disease, propagated secondary damage remains. We consider both short-term mortality effects due to (acute) exogenous damage and long-term mortality effects due to propagated damage within the context of a generic network model (GNM) of individual aging that simulates a U.S. population. Across a wide range of disease durations and severities we find that while excess short-term mortality is highest for the oldest individuals, the long-term years of life lost are highest for the youngest individuals. These appear to be universal effects of human disease. We support this conclusion with a phenomenological model coupling damage and mortality. Our results are consistent with previous lifetime mortality studies of atom bomb survivors and post-recovery health studies of COVID-19. We suggest that short-term health impact studies could complement lifetime mortality studies to better characterize the lifetime impacts of disease on both individuals and populations.

| S-EPMC10539353 | biostudies-literature

Optimal competition strategy analysis of China Railway Express based on evolutionary game theory.

Project description:In the context of the Belt and Road Initiative, China Railway Express achieved rapid development. Determining how to achieve effective marking and determining how to adopt the optimal competitive strategy are the main challenges for CR Express operators. By choosing long-distance transportation as the research object, this research established a competitive model between CR Express and maritime transportation based on game theory. First, we determined the participants of this competition. By dividing common goods into the categories of high-value and high-time-sensitiveness, high-value and low-time-sensitiveness, low-value and high-time-sensitiveness, and low-value and low-time-sensitiveness, the model was used to simulate four situations and to obtain optimal strategies for operators. For CR Express, it was always effective to adopt a service optimizing strategy to improve the service level and earn market share. For maritime transportation, this strategy was effective only for high-value and low-time-sensitiveness goods as well as low value and low-time-sensitiveness goods. Therefore, transportation service suppliers should make competitive strategies based on different good types, and it is effective to use differentiation strategies to earn market share and improve competitiveness only for suitable types of goods.

| S-EPMC8932592 | biostudies-literature

Quantifying the land and population risk of sewage spills overland using a fine-scale, DEM-based GIS model.

Project description:Accidental releases of untreated sewage into the environment, known as sewage spills, may cause adverse gastrointestinal stress to exposed populations, especially in young, elderly, or immune-compromised individuals. In addition to human pathogens, untreated sewage contains high levels of micropollutants, organic matter, nitrogen, and phosphorus, potentially resulting in aquatic ecosystem impacts such as algal blooms, depleted oxygen, and fish kills in spill-impacted waterways. Our Geographic Information System (GIS) model, Spill Footprint Exposure Risk (SFER) integrates fine-scale elevation data (1/3 arc-second) with flowpath tracing methods to estimate the expected overland pathways of sewage spills and the locations where they are likely to pool. The SFER model can be integrated with secondary measures tailored to the unique needs of decision-makers so they can assess spatially potential exposure risk. To illustrate avenues to assess risk, we developed risk measures for land and population health. The land risk of sewage spills is calculated for subwatershed regions by computing the proportion of the subwatershed's area that is affected by one modeled footprint. The population health risk is assessed by computing the estimated number of individuals who are within the modeled footprint using fine-scale (90 square meters) population estimates data from LandScan USA. In the results, with a focus on the Atlanta metropolitan region, potential strategies to combine these risk measures with the SFER model are outlined to identify specific areas for intervention.

| S-EPMC10666614 | biostudies-literature

Efficacy of pH elevation as a bactericidal strategy for treating ballast water of freight carriers.

Project description:Treatment of ship ballast water with sodium hydroxide (NaOH) is one method currently being developed to minimize the risk to introduce aquatic invasive species. The bactericidal capability of sodium hydroxide was determined for 148 bacterial strains from ballast water collected in 2009 and 2010 from the M/V Indiana Harbor, a bulk-freight carrier plying the Laurentian Great Lakes, USA. Primary culture of bacteria was done using brain heart infusion agar and a developmental medium. Strains were characterized based on PCR amplification and sequencing of a portion of the 16S rRNA gene. Sequence similarities (99+ %) were determined by comparison with the National Center for Biotechnology Information (NCBI) GenBank catalog. Flavobacterium spp. were the most prevalent bacteria characterized in 2009, comprising 51.1% (24/47) of the total, and Pseudomonas spp. (62/101; 61.4%) and Brevundimonas spp. (22/101; 21.8%) were the predominate bacteria recovered in 2010; together, comprising 83.2% (84/101) of the total. Testing was done in tryptic soy broth (TSB) medium adjusted with 5 N NaOH. Growth of each strain was evaluated at pH 10.0, pH 11.0 and pH 12.0, and 4 h up to 72 h. The median cell count at 0 h for 148 cultures was 5.20 × 10(6) cfu/mL with a range 1.02 × 10(5)-1.60 × 10(8) cfu/mL. The TSB adjusted to pH 10.0 and incubation for less than 24 h was bactericidal to 52 (35.1%) strains. Growth in pH 11.0 TSB for less than 4 h was bactericidal to 131 (88.5%) strains and pH 11.0 within 12 h was bactericidal to 141 (95.3%). One strain, Bacillus horikoshii, survived the harshest treatment, pH 12.0 for 72 h.

| S-EPMC4522580 | biostudies-literature

Engineering a Bi-Conical Microchip as Vascular Stenosis Model.

Project description:Vascular stenosis is always associated with hemodynamic changes, especially shear stress alterations. Herein, bi-conical shaped microvessels were developed through flexibly and precisely controlled templated methods for hydrogel blood-vessel-like microchip. The blood-vessel-like microvessels demonstrated tunable dimensions, perfusable ability, and good cytocompatibility. The microchips showed blood-vessel-like lumens through fine embeddedness of human umbilical vein endothelial cells (HUVECs) on the interior surface of hydrogel microchannels, which closely reproduced the morphology and functions of human blood vessels. In the gradual narrowing region of bi-conical shape, fluid flow generated wall shear stress, which caused cell morphology variations. Wall shear rates at the gradual narrowing region were simulated by FLUENT software. The results showed that our microchannels qualified for performance as a vascular stenosis-like model in evaluating blood hydrodynamics. In general, our blood-vessel-on-a-chip could offer potential applications in the prevention, diagnosis, and therapy of arterial thrombosis.

| S-EPMC6915513 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data