Browse
Submit Data
Databases
API
Help

Dataset Information

27 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Zn-Based Deep Eutectic Solvent as the Stabilizing Electrolyte for Zn Metal Anode in Rechargeable Aqueous Batteries.

ABSTRACT: Owing to its low cost and high safety, metallic zinc has received considerable attention as an anode material for zinc aqueous batteries (ZIBs). However, the Zn metal instability as a result ultrafast of obstinate dendrite formation, free-water-induced parasite reactions, and corrosive electrolytes has detrimental effects on the implementation of ZIBs. We present an alternative stable electrolyte for ZIBs based on a zinc chloride/ethylene glycol deep eutectic solvent (DES). This electrolyte consists of abundant low-cost materials and a utilizable Zn²⁺ concentration of approximately 1 M. It combines the advantages of the aqueous and DES media to provide safe and reversible Zn plating/stripping with a two-fold increase in the cycling life compared to that of conventional aqueous electrolytes. With these advantages, the Zn symmetric cell operates at 0.2 mA cm^-2 for 300 h. Due to its high efficiency and compositional versatility, this electrolyte enables the investigation of a non-aqueous electrolyte family for ZIBs that fulfill grid-scale electrical energy storage requirements.

SUBMITTER: Thorat GM

PROVIDER: S-EPMC8795620 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Interface solvation regulation stabilizing the Zn metal anode in aqueous Zn batteries.

Project description:The Zn metal anode experiences dendritic growth and side reactions in aqueous zinc batteries. The regulation of the interface environment would provide efficient modification without largely affecting the aqueous nature of bulk electrolytes. Herein, we show that the ethylene carbonate (EC) additive is able to adsorb on the Zn surface from the ZnSO4 electrolyte. Together with the higher dielectric constant of EC than water, Zn2+ preferentially forms EC-rich solvation structures at the interface even with a low overall EC content of 4%. An inorganic-organic solid-electrolyte interface (SEI) is also generated. Thanks to the increased energy levels of the lowest unoccupied molecular orbital of EC-rich solvation structures and the stable SEI, side reactions are suppressed and the Zn2+ transference number increases to allow uniform Zn growth. As a result, the cycle life of Zn stripping/plating in symmetric Zn cells extends from 108 h to 1800 h after the addition of 4% EC. Stable cycling for 180 h is realized with 35% depth of discharge in the 4% EC electrolyte, superior to the initial cell failure with EC-free electrolyte. The capacity retention of the Zn//V6O13·H2O full cell with N/P = 1.3 also increases from 51.1% to 80.5% after 500 cycles with the help of EC.

| S-EPMC10395310 | biostudies-literature

Towards the practical application of Zn metal anodes for mild aqueous rechargeable Zn batteries.

Project description:Rechargeable aqueous Zn batteries have been widely investigated in recent years due to the merits of high safety and low cost. However inevitable dendrite growth, corrosion and hydrogen evolution of Zn anodes severely compromise the practical lifespan of rechargeable Zn batteries. Despite the encouraging improvements for Zn anodes reported in the literature, the comprehensive understanding of Zn anodes under practical conditions is still often neglected. In this article, we focus on the "less-discussed" but critically important points for rechargeable aqueous Zn batteries, including revisit of the relationship between the coulombic efficiency and lifespan of Zn anodes, the rational control of the pH environment in the vicinity of Zn anodes, the design of appropriate aqueous separators and the relevant estimation of practical energy density for aqueous Zn batteries. It concludes that energy density of 60-80 W h kg-1 for aqueous Zn batteries should be realistic in practice with appropriate cell design. We also propose practical technical recommendations for the rational development of aqueous Zn batteries based on research experience from the community and our group. We hope this article offers readers more practical insights into the future development of aqueous Zn batteries as competitive technology for practical use.

| S-EPMC9297528 | biostudies-literature

Tannic acid assisted metal-chelate interphase toward highly stable Zn metal anodes in rechargeable aqueous zinc-ion batteries.

Project description:Aqueous zinc-ion batteries (AZIBs) have attracted extensive attention because of their eco-friendliness, intrinsic safety, and high theoretical capacity. Nevertheless, the long-standing Zn anode issues such as dendrite growth, hydrogen evolution, and passivation greatly restrict the further development of AZIBs. Herein, a metal-chelate interphase with high Zn affinity is constructed on the Zn metal surface (TA@Zn) via dipping metallic Zn into a tannic acid (TA) solution to address the aforementioned problems. Benefiting from the abundant hydrophilic and zincophilic phenolic hydroxyl groups of TA molecules, the metal-chelate interphase shows strong attraction for Zn2+ ions, guiding uniform zinc deposition as well as decreasing Zn2+ migration barrier. Therefore, the TA@Zn anode displays an extended lifespan of 850 h at 1 mA cm-2, 1 mAh cm-2 in the Zn|Zn symmetrical cell, and a high Coulombic efficiency of 96.8% in the Zn|Ti asymmetric cell. Furthermore, the Zn|V2O5 full cell using TA@Zn anode delivers an extremely high capacity retention of 95.9% after 750 cycles at 2 A g-1. This simple and effective strategy broadens the interfacial modification scope on Zn metal anodes for advanced rechargeable Zn metal batteries.

| S-EPMC9399369 | biostudies-literature

Electrolyte engineering via ether solvent fluorination for developing stable non-aqueous lithium metal batteries

Project description:Fluorination of ether solvents is an effective strategy to improve the electrochemical stability of non-aqueous electrolyte solutions in lithium metal batteries. However, excessive fluorination detrimentally impacts the ionic conductivity of the electrolyte, thus limiting the battery performance. Here, to maximize the electrolyte ionic conductivity and electrochemical stability, we introduce the targeted trifluoromethylation of 1,2-dimethoxyethane to produce 1,1,1-trifluoro-2,3-dimethoxypropane (TFDMP). TFDMP is used as a solvent to prepare a 2 M non-aqueous electrolyte solution comprising bis(fluorosulfonyl)imide salt. This electrolyte solution shows an ionic conductivity of 7.4 mS cm–1 at 25 °C, an oxidation stability up to 4.8 V and an efficient suppression of Al corrosion. When tested in a coin cell configuration at 25 °C using a 20 μm Li metal negative electrode, a high mass loading LiNi0.8Co0.1Mn0.1O2-based positive electrode (20 mg cm–2) with a negative/positive (N/P) capacity ratio of 1, discharge capacity retentions (calculated excluding the initial formation cycles) of 81% after 200 cycles at 0.1 A g–1 and 88% after 142 cycles at 0.2 A g–1 are achieved. Fluorination of solvents, useful for non-aqueous lithium-based batteries, improves the electrochemical stability but decreases the ionic conductivity. Here, the authors report a targeted functionalization of an ether solvent to balance the electrolyte ionic conductivity and oxidative stability.

| S-EPMC9849263 | biostudies-literature

<i>N</i>,<i>N</i>-dimethylformamide tailors solvent effect to boost Zn anode reversibility in aqueous electrolyte.

Project description:Rechargeable aqueous Zn batteries are considered as promising energy-storage devices because of their high capacity, environmental friendliness and low cost. However, the hydrogen evolution reaction and growth of dendritic Zn in common aqueous electrolytes severely restrict the application of Zn batteries. Here, we develop a simple strategy to suppress side reactions and boost the reversibility of the Zn electrode. By introducing 30% (volume fractions) N,N-dimethylformamide (DMF) to the 2 M Zn(CF3SO3)2-H2O electrolyte (ZHD30), the preferential hydrogen-bonding effect between DMF and H2O effectively reduces the water activity and hinders deprotonation of the electrolyte. The ZHD30 electrolyte improves the Zn plating/stripping coulombic efficiency from ∼95.3% to ∼99.4% and enhances the cycles from 65 to 300. The Zn-polyaniline full battery employing the ZHD30 electrolyte can operate over a wide temperature range from -40°C to +25°C and deliver capacities of 161.6, 127.4 and 65.8 mAh g-1 at 25, -20 and -40°C, respectively. This work provides insights into the role of tuning solvent effects in designing low-cost and effective aqueous electrolytes.

| S-EPMC9671663 | biostudies-literature

An aqueous rechargeable lithium battery using coated Li metal as anode.

Project description:New energy industry including electric vehicles and large-scale energy storage in smart grids requires energy storage systems of good safety, high reliability, high energy density and low cost. Here a coated Li metal is used as anode for an aqueous rechargeable lithium battery (ARLB) combining LiMn2O4 as cathode and 0.5 mol l(-1) Li2SO4 aqueous solution as electrolyte. Due to the "cross-over" effect of Li(+) ions in the coating, this ARLB delivers an output voltage of about 4.0 V, a big breakthrough of the theoretic stable window of water, 1.229 V. Its cycling is very excellent with Coulomb efficiency of 100% except in the first cycle. Its energy density can be 446 Wh kg(-1), about 80% higher than that for traditional lithium ion battery. Its power efficiency can be above 95%. Furthermore, its cost is low and safety is much reliable. It provides another chemistry for post lithium ion batteries.

| S-EPMC3590562 | biostudies-literature

Redox-active zinc thiolates for low-cost aqueous rechargeable Zn-ion batteries.

Project description:Aqueous zinc-ion batteries (AZIBs) are promising candidates for large-scale electrical energy storage due to the inexpensive, safe, and non-toxic nature of zinc. One key area that requires further development is electrode materials that store Zn2+ ions with high reversibility and fast kinetics. To determine the viability of low-cost organosulfur compounds as OEMs for AZIBs, we investigate how structural modification affects electrochemical performance in Zn-thiolate complexes 1 and 2. Remarkably, modification of one thiolate in 1 to sulfide in 2 reduces the voltage hysteresis from 1.04 V to 0.15 V. While 1 exhibits negligible specific capacity due to the formation of insulating DMcT polymers, 2 delivers a capacity of 107 mA h g-1 with a primary discharge plateau at 1.1 V vs. Zn2+/Zn. Spectroscopic studies of 2 suggest a Zn2+ and H+ co-insertion mechanism with Zn2+ as the predominant charge carrier. Capacity fading in Zn-2 cells likely results from the formation of (i) soluble H+ insertion products and (ii) non-redox-active side products. Increasing electrolyte concentration and using a Nafion membrane significantly enhances the stability of 2 by suppressing H+ insertion. Our findings provide insight into the molecular design strategies to reduce the polarization potential and improve the cycling stability of the thiolate/disulfide redox couple in aqueous battery systems.

| S-EPMC8635210 | biostudies-literature

Long-lived Aqueous Rechargeable Lithium Batteries Using Mesoporous LiTi2(PO4)3@C Anode.

Project description:The instability of anode materials during cycling has been greatly limiting the lifetime of aqueous rechargeable lithium batteries (ARLBs). Here, to tackle this issue, mesoporous LiTi2(PO4)3@C composites with a pore size of 4 nm and a large BET surface area of 165 m(2) g(-1) have been synthesized by a novel two-step approach. The ARLB with this type of LiTi2(PO4)3@C anode, commercial LiMn2O4 cathode and 2 M Li2(SO4) aqueous solution (oxygen was removed) exhibited superior cycling stability (a capacity retention of 88.9% after 1200 cycles at 150 mA g(-1) and 82.7% over 5500 cycles at 750 mA g(-1)) and excellent rate capability (discharge capacities of 121, 110, 90, and 80 mAh g(-1) based on the mass of LiTi2(PO4)3 at 30, 150, 1500, and 3000 mA g(-1), respectively). As verified, the mesoporous structure, large surface area and high-quality carbon coating layer of the LiTi2(PO4)3@C composite contribute to the breakthrough in achieving excellent electrochemical properties for ARLB.

| S-EPMC4673533 | biostudies-literature

A single-ion conducting covalent organic framework for aqueous rechargeable Zn-ion batteries.

Project description:Despite their potential as promising alternatives to current state-of-the-art lithium-ion batteries, aqueous rechargeable Zn-ion batteries are still far away from practical applications. Here, we present a new class of single-ion conducting electrolytes based on a zinc sulfonated covalent organic framework (TpPa-SO3Zn0.5) to address this challenging issue. TpPa-SO3Zn0.5 is synthesised to exhibit single Zn2+ conduction behaviour via its delocalised sulfonates that are covalently tethered to directional pores and achieve structural robustness by its β-ketoenamine linkages. Driven by these structural and physicochemical features, TpPa-SO3Zn0.5 improves the redox reliability of the Zn metal anode and acts as an ionomeric buffer layer for stabilising the MnO2 cathode. Such improvements in the TpPa-SO3Zn0.5-electrode interfaces, along with the ion transport phenomena, enable aqueous Zn-MnO2 batteries to exhibit long-term cyclability, demonstrating the viability of COF-mediated electrolytes for Zn-ion batteries.

| S-EPMC8162792 | biostudies-literature

A new ether-based electrolyte for dendrite-free lithium-metal based rechargeable batteries.

Project description:A new ether-based electrolyte to match lithium metal electrode is prepared by introducing 1, 4-dioxane as co-solvent into lithium bis(fluorosulfonyl)imide/1,2-dimethoxyethane solution. Under the synergetic effect of solvents and salt, this simple liquid electrolyte presents stable Li cycling with dendrite-free Li deposition even at relatively high current rate, high coulombic efficiency of ca. 98%, and good anodic stability up to ~4.87 V vs Li RE. Its excellent performance will open up a new possibility for high energy-density rechargeable Li metal battery system.

| S-EPMC4754942 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data