Browse
Submit Data
Databases
API
Help

Dataset Information

21 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Long-lived Aqueous Rechargeable Lithium Batteries Using Mesoporous LiTi2(PO4)3@C Anode.

ABSTRACT: The instability of anode materials during cycling has been greatly limiting the lifetime of aqueous rechargeable lithium batteries (ARLBs). Here, to tackle this issue, mesoporous LiTi2(PO4)3@C composites with a pore size of 4 nm and a large BET surface area of 165 m(2) g(-1) have been synthesized by a novel two-step approach. The ARLB with this type of LiTi2(PO4)3@C anode, commercial LiMn2O4 cathode and 2 M Li2(SO4) aqueous solution (oxygen was removed) exhibited superior cycling stability (a capacity retention of 88.9% after 1200 cycles at 150 mA g(-1) and 82.7% over 5500 cycles at 750 mA g(-1)) and excellent rate capability (discharge capacities of 121, 110, 90, and 80 mAh g(-1) based on the mass of LiTi2(PO4)3 at 30, 150, 1500, and 3000 mA g(-1), respectively). As verified, the mesoporous structure, large surface area and high-quality carbon coating layer of the LiTi2(PO4)3@C composite contribute to the breakthrough in achieving excellent electrochemical properties for ARLB.

SUBMITTER: Sun D

PROVIDER: S-EPMC4673533 | biostudies-literature | 2015

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Long-lived Aqueous Rechargeable Lithium Batteries Using Mesoporous LiTi2(PO4)3@C Anode.

Sun Dan D Tang Yougen Y He Kejian K Ren Yu Y Liu Suqin S Wang Haiyan H

Scientific reports 20151209

The instability of anode materials during cycling has been greatly limiting the lifetime of aqueous rechargeable lithium batteries (ARLBs). Here, to tackle this issue, mesoporous LiTi2(PO4)3@C composites with a pore size of 4 nm and a large BET surface area of 165 m(2) g(-1) have been synthesized by a novel two-step approach. The ARLB with this type of LiTi2(PO4)3@C anode, commercial LiMn2O4 cathode and 2 M Li2(SO4) aqueous solution (oxygen was removed) exhibited superior cycling stability (a ca ...[more]

PMID: 26648263

Similar Datasets

Advanced aqueous rechargeable lithium battery using nanoparticulate LiTi2(PO4)3/C as a superior anode.

Project description:Poor cycling performance arising from the instability of anode is still a main challenge for aqueous rechargeable lithium batteries (ARLB). In the present work, a high performance LiTi2(PO4)3/C composite has been achieved by a novel and facile preparation method associated with an in-situ carbon coating approach. The LiTi2(PO4)3/C nanoparticles show high purity and the carbon layer is very uniform. When used as an anode material, the ARLB of LiTi2(PO4)3/C//LiMn2O4 delivered superior cycling stability with a capacity retention of 90% after 300 cycles at 30 mA g(-1) and 84% at 150 mA g(-1) over 1300 cycles. It also demonstrated excellent rate capability with reversible discharge capacities of 115 and 89 mAh g(-1) (based on the mass of anode) at 15 and 1500 mA g(-1), respectively. The superior electrochemical properties should be mainly ascribed to the high performance of LiTi2(PO4)3/C anode, benefiting from its nanostructure, high-quality carbon coating, appropriate crystal structure and excellent electrode surface stability as verified by Raman spectra, electrochemical impedance spectroscopy (EIS), X-ray diffraction (XRD) and scanning electron microscopy (SEM) measurements.

| S-EPMC4451790 | biostudies-other

An aqueous rechargeable lithium battery using coated Li metal as anode.

Project description:New energy industry including electric vehicles and large-scale energy storage in smart grids requires energy storage systems of good safety, high reliability, high energy density and low cost. Here a coated Li metal is used as anode for an aqueous rechargeable lithium battery (ARLB) combining LiMn2O4 as cathode and 0.5?mol l(-1) Li2SO4 aqueous solution as electrolyte. Due to the "cross-over" effect of Li(+) ions in the coating, this ARLB delivers an output voltage of about 4.0?V, a big breakthrough of the theoretic stable window of water, 1.229?V. Its cycling is very excellent with Coulomb efficiency of 100% except in the first cycle. Its energy density can be 446?Wh kg(-1), about 80% higher than that for traditional lithium ion battery. Its power efficiency can be above 95%. Furthermore, its cost is low and safety is much reliable. It provides another chemistry for post lithium ion batteries.

| S-EPMC3590562 | biostudies-literature

High-Energy-Density Rechargeable Lithium-Nickel Chloride Aqueous Solution Batteries.

Project description:High-energy-density rechargeable batteries with performance beyond that of lithium-ion batteries are required for next-generation electric vehicles. We propose a novel rechargeable battery with a lithium anode and a NiCl2 aqueous cathode that is separated Li1.4Al0.4Ge0.2Ti1.4(PO4)3 as a water-stable lithium-ion-conducting solid electrolyte. The cell was discharged up to 93% of the theoretical cathode capacity at 0.5 mA cm-2 and 25 °C. The calculated energy density, based on the weights of NiCl2 and Li, and the average discharge voltage of 2.4 V at 0.5 mA cm-2, was 852 Wh kg-1, which is more than twice as high as that of conventional lithium-ion batteries. The cell was successfully cycled for 50 cycles without any degradation of the charge and discharge voltages at 0.5 mA cm-2 and 25 °C for 5 h charge and 5 h discharge, where the utilization of NiCl2 was 80%.

| S-EPMC6641902 | biostudies-literature

Stabilizing lithium metal using ionic liquids for long-lived batteries.

Project description:Suppressing dendrite formation at lithium metal anodes during cycling is critical for the implementation of future lithium metal-based battery technology. Here we report that it can be achieved via the facile process of immersing the electrodes in ionic liquid electrolytes for a period of time before battery assembly. This creates a durable and lithium ion-permeable solid-electrolyte interphase that allows safe charge-discharge cycling of commercially applicable Li|electrolyte|LiFePO4 batteries for 1,000 cycles with Coulombic efficiencies >99.5%. The tailored solid-electrolyte interphase is prepared using a variety of electrolytes based on the N-propyl-N-methylpyrrolidinium bis(fluorosulfonyl)imide room temperature ionic liquid containing lithium salts. The formation is both time- and lithium salt-dependant, showing dynamic morphology changes, which when optimized prevent dendrite formation and consumption of electrolyte during cycling. This work illustrates that a simple, effective and industrially applicable lithium metal pretreatment process results in a commercially viable cycle life for a lithium metal battery.

| S-EPMC4909938 | biostudies-literature

Long Cycle Life Organic Polysulfide Catholyte for Rechargeable Lithium Batteries.

Project description:Organic compounds with active sites for lithiation can be used as electrode materials for lithium batteries. Their tunable structures allow a variety of materials to be made and investigated. Herein, a spectrum of dipyridyl polysulfides (Py2S x , 3 ? x ? 8) is prepared in electrolyte by a one-pot synthesis method from dipyridyl disulfide (Py2S2) and elemental sulfur. It renders up to seven dipyridyl polysulfides (i.e., Py2S3, Py2S4, Py2S5, Py2S6, Py2S7, and Py2S8) which show fully reversible electrochemical behavior in lithium batteries. In the discharge, the initial lithiation occurs at 2.45 V leading to the breakage of S?-S? bonds in Py2S x and formation of lithium 2-pyridinethiolate, in which lithium is coordinated in between N and S atoms. The left sulfur species act as elemental sulfur, showing two voltage plateaus at 2.3 and 2.1 V. The molecular dynamics simulations show the attraction between pyridyl groups and lithium polysulfides/sulfide via N···Li···S bonds, which enable good retention of soluble discharge products within electrodes and stable cycling performance. In the recharge, low-order Py2S x (e.g., Py2S3, Py2S4, and Py2S5) remain as the charged products. The mixture catholyte exhibits superlong cycle life at 1C rate with 1200 cycles and 70.5% capacity retention.

| S-EPMC7029628 | biostudies-literature

Niobium(V) oxynitride: synthesis, characterization, and feasibility as anode material for rechargeable lithium-ion batteries.

Project description:The decomposition reaction of niobium(V) oxytrichloride ammoniate to the oxynitride of niobium in the 5+ oxidation state was developed in a methodological way. By combining elemental analysis, Rietveld refinements of X-ray and neutron diffraction data, SEM and TEM, the sample compound was identified as approximately 5?nm-diameter particles of NbO(1.3(1))N(0.7(1)) crystallizing with baddeleyite-type structure. The thermal stability of this compound was studied in detail by thermogravimetric/differential thermal analysis and temperature-dependent X-ray diffraction. Moreover, the electrochemical uptake and release by the galvanostatic cycling method of pure and carbon-coated NbO(1.3(1))N(0.7(1)) versus lithium was investigated as an example of an Li-free transition-metal oxynitride. The results showed that reversible capacities as high as 250 and 80?A?h? kg(-1) can be reached in voltage ranges of 0.05-3 and 1-3?V, respectively. Furthermore, a plausible mechanism for the charge-discharge reaction is proposed.

| S-EPMC3528069 | biostudies-literature

Novel Rechargeable M3V2(PO4)3//Zinc (M = Li, Na) Hybrid Aqueous Batteries with Excellent Cycling Performance.

Project description:A rechargeable hybrid aqueous battery (ReHAB) containing NASICON-type M3V2(PO4)3 (M = Li, Na) as the cathodes and Zinc metal as the anode, working in Li2SO4-ZnSO4 aqueous electrolyte, has been studied. Both of Li3V2(PO4)3 and Na3V2(PO4)3 cathodes can be reversibly charge/discharge with the initial discharge capacity of 128 mAh g(-1) and 96 mAh g(-1) at 0.2C, respectively, with high up to 84% of capacity retention ratio after 200 cycles. The electrochemical assisted ex-XRD confirm that Li3V2(PO4)3 and Na3V2(PO4)3 are relative stable in aqueous electrolyte, and Na3V2(PO4)3 showed more complicated electrochemical mechanism due to the co-insertion of Li(+) and Na(+). The effect of pH of aqueous electrolyte and the dendrite of Zn on the cycling performance of as designed MVP/Zn ReHABs were investigated, and weak acidic aqueous electrolyte with pH around 4.0-4.5 was optimized. The float current test confirmed that the designed batteries are stable in aqueous electrolytes. The MVP//Zn ReHABs could be a potential candidate for future rechargeable aqueous battery due to their high safety, fast dynamic speed and adaptable electrochemical window. Moreover, this hybrid battery broadens the scope of battery material research from single-ion-involving to double-ions -involving rechargeable batteries.

| S-EPMC4865945 | biostudies-other

Zn-Based Deep Eutectic Solvent as the Stabilizing Electrolyte for Zn Metal Anode in Rechargeable Aqueous Batteries.

Project description:Owing to its low cost and high safety, metallic zinc has received considerable attention as an anode material for zinc aqueous batteries (ZIBs). However, the Zn metal instability as a result ultrafast of obstinate dendrite formation, free-water-induced parasite reactions, and corrosive electrolytes has detrimental effects on the implementation of ZIBs. We present an alternative stable electrolyte for ZIBs based on a zinc chloride/ethylene glycol deep eutectic solvent (DES). This electrolyte consists of abundant low-cost materials and a utilizable Zn2+ concentration of approximately 1 M. It combines the advantages of the aqueous and DES media to provide safe and reversible Zn plating/stripping with a two-fold increase in the cycling life compared to that of conventional aqueous electrolytes. With these advantages, the Zn symmetric cell operates at 0.2 mA cm-2 for 300 h. Due to its high efficiency and compositional versatility, this electrolyte enables the investigation of a non-aqueous electrolyte family for ZIBs that fulfill grid-scale electrical energy storage requirements.

| S-EPMC8795620 | biostudies-literature

Lithium lanthanum titanate perovskite as an anode for lithium ion batteries.

Project description:Conventional lithium-ion batteries embrace graphite anodes which operate at potential as low as metallic lithium, subjected to poor rate capability and safety issues. Among possible alternatives, oxides based on titanium redox couple, such as spinel Li4Ti5O12, have received renewed attention. Here we further expand the horizon to include a perovskite structured titanate La0.5Li0.5TiO3 into this promising family of anode materials. With average potential of around 1.0?V vs. Li+/Li, this anode exhibits high specific capacity of 225?mA?h?g-1 and sustains 3000 cycles involving a reversible phase transition. Without decrease the particle size from micro to nano scale, its rate performance has exceeded the nanostructured Li4Ti5O12. Further characterizations and calculations reveal that pseudocapacitance dictates the lithium storage process and the favorable ion and electronic transport is responsible for the rate enhancement. Our findings provide fresh impetus to the identification and development of titanium-based anode materials with desired electrochemical properties.

| S-EPMC7359355 | biostudies-literature

Amorphous mesoporous GeO x anode for Na-ion batteries with high capacity and long lifespan.

Project description:It is recently demonstrated that amorphous Ge anode shows higher reversible Na-ion storage capacity (590?mA?h?g-1) than crystallized Ge anode (369?mA?h?g-1). Here, amorphous GeO x anode is prepared by a simple wet-chemistry reduction route at room temperature. The obtained amorphous GeO x shows a porous hierarchical architecture, accompanied with a Brunauer-Emmett-Teller surface area of 159?m2?g-1 and an average pore diameter of 14?nm. This unique structure enables the GeO x anode to enhance the Na-ion/electron diffusion rate, and buffer the volume change. As anode for Na-ion battery, high reversible capacity over 400?mA?h?g-1, fine rate capability with a capacity of 200?mA?h?g-1 maintained at 3.0?A?g-1 and long-term cycling stability with 270?mA?h?g-1 even over 1000 cycles at 1.0?A?g-1 are obtained.

| S-EPMC5792927 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data