Antibacterial effect on microscale rough surface formed by fine particle bombarding.
Ontology highlight
ABSTRACT:
SUBMITTER: Nishitani T
PROVIDER: S-EPMC8804057 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Photothermal therapy has been intensively investigated for treating cancer in recent years. However, the long-term therapeutic outcome remains unsatisfying due to the frequently occurred metastasis and recurrence. To address this challenge, immunotherapy has been combined with photothermal therapy to activate anti-tumor immunity and relieve the immunosuppressive microenvironment within tumor sites. Here, we engineered silica-based core‒shell nanoparticles (JQ-1@PSNs-R), in which silica cores were coated with the photothermal agent polydopamine, and a bromodomain-containing protein 4 (BRD4) inhibitor JQ-1 was loaded in the polydopamine layer to combine photothermal and immune therapy for tumor elimination. Importantly, to improve the therapeutic effect, we increased the surface roughness of the nanoparticles by hydrofluoric acid (HF) etching during the fabrication process, and found that the internalization of JQ-1@PSNs-R was significantly improved, leading to a strengthened photothermal killing effect as well as the increased intracellular delivery of JQ-1. In the animal studies, the multifunctional nanoparticles with rough surfaces effectively eradicated melanoma via photothermal therapy, successfully activated tumor-specific immune responses against residual tumor cells, and further prevented tumor metastasis and recurrence. Our results indicated that JQ-1@PSNs-R could serve as an innovative and effective strategy for combined cancer therapy. Graphical abstract The rough-surface JQ-1@PSNs-R effectively eradicated melanoma via photothermal therapy, successfully activated tumor-specific immune response against residual tumor cells, and further prevented tumor recurrence.Image 1
| S-EPMC9214318 | biostudies-literature
Project description:The micro arc oxidation (MAO) coatings with different concentrations of Ca, P and Zn elements are successfully formed on the titanium substrate at the different applied voltages. After MAO treatment, the MAO coating exhibits the porous surface structure and composed of anatase and rutile TiO2 phases. Meanwhile, the average size and density of micro-pores on the MAO coatings have been modified via the adjusting the applied voltages. In addition, the contents of the incorporated elements such as Zn, Ca and P elements in the MAO coatings have been optimized. The bonding strength test results reveal that the MAO coating shows higher bonding strength, which is up to 45 ± 5 MPa. Compared to the pure Ti plate, the MAO coating formed at 350 and 400 V show good apatite-inducing ability. Meanwhile, the MAO coating containing Zn, Ca and P elements have better antibacterial ability for E.coli and S.aureus. Thus, the incorporation of Zn, Ca and P elements was an effective method to improve the antibacterial ability. Moreover, the concentrations of Zn, Ca and P elements could be adjusted with the changing of the applied voltages. As a result, the enhancement of the antibacterial ability on the MAO coating surfaces was depended on the comprehensive effect of the incorporated elements and the surface property of MAO coatings.
| S-EPMC6031222 | biostudies-literature
Project description:An inventive microscale simulation approach is applied to investigate the mechanics of frozen particle fluid systems (PFS). The simulation is based on the discrete element method (DEM) and bonded-particle model (BPM) approach. Discrete particles connected by solid bonds represent frozen agglomerates. Uniaxial compression experiments were performed to gather data for material modeling and further simulation model validation. Different typical mechanical behavior (brittle, ductile, dilatant) were reviewed regarding strain rates, saturation levels, and particle mechanical or surface properties. Among all these factors, strain rate significantly affects the mechanical behavior and properties of the agglomerates. A new solid bond model considering strain-dependent and time-dependent behavior is developed for describing the rheology of the frozen particle fluid systems. Without alternating Young's modulus and Poisson's ratio of the bond material, the developed solid model provides a suitable agreement with the experimental results regarding different strain rates.
| S-EPMC9739081 | biostudies-literature
Project description:The transport of particles and fluids through multichannel microfluidic networks is influenced by details of the channels. Because channels have micro-scale textures and macro-scale geometries, this transport can differ from the case of ideally smooth channels. Surfaces of real channels have irregular boundary conditions to which streamlines adapt and with which particle interact. In low-Reynolds number flows, particles may experience inertial forces that result in trans-streamline movement and the reorganization of particle distributions. Such transport is intrinsically 3D and an accurate measurement must capture movement in all directions. To measure the effects of non-ideal surface textures on particle transport through complex networks, we developed an extended field-of-view 3D macroscope for high-resolution tracking across large volumes ([Formula: see text]) and investigated a model multichannel microfluidic network. A topographical profile of the microfluidic surfaces provided lattice Boltzmann simulations with a detailed feature map to precisely reconstruct the experimental environment. Particle distributions from simulations closely reproduced those observed experimentally and both measurements were sensitive to the effects of surface roughness. Under the conditions studied, inertial focusing organized large particles into an annular distribution that limited their transport throughout the network while small particles were transported uniformly to all regions.
| S-EPMC7427810 | biostudies-literature
Project description:Inertial microfluidics has demonstrated the potential to provide a rich range of capabilities to manipulate biological fluids and particles to address various challenges in biomedical science and clinical medicine. Various microchannel geometries have been used to study the inertial focusing behavior of particles suspended in simple buffer solutions or in highly diluted blood. One aspect of inertial focusing that has not been studied is how particles suspended in whole or minimally diluted blood respond to inertial forces in microchannels. The utility of imaging techniques (i.e., high-speed bright-field imaging and long exposure fluorescence (streak) imaging) primarily used to observe particle focusing in microchannels is limited in complex fluids such as whole blood due to interference from the large numbers of red blood cells (RBCs). In this study, we used particle trajectory analysis (PTA) to observe the inertial focusing behavior of polystyrene beads, white blood cells, and PC-3 prostate cancer cells in physiological saline and blood. Identification of in-focus (fluorescently labeled) particles was achieved at mean particle velocities of up to 1.85 m s(-1). Quantitative measurements of in-focus particles were used to construct intensity maps of particle frequency in the channel cross-section and scatter plots of particle centroid coordinates vs. particle diameter. PC-3 cells spiked into whole blood (HCT = 45%) demonstrated a novel focusing mode not observed in physiological saline or diluted blood. PTA can be used as an experimental frame of reference for understanding the physical basis of inertial lift forces in whole blood and discover inertial focusing modes that can be used to enable particle separation in whole blood.
| S-EPMC4211080 | biostudies-literature
Project description:Wounding of trees by debarking during the vegetative period sometimes results in the formation of callus tissue which develops over the entire wound surface or on parts of it. This light and transmission electron microscopy study of living lime trees found that the formation of such a surface callus is subdivided into three stages. During the first stage, numerous cell divisions take place in regions where differentiating xylem remains at the wound surface after debarking. This young callus tissue consists of isodiametric parenchymatous cells. Cambium cells, sometimes also remaining at the wound surface, collapse and do not contribute to callus formation. During the second stage, cells in the callus undergo differentiation by forming a wound periderm with phellem, phellogen and phelloderm. In the third stage, a cambial zone develops between the wound periderm and the xylem tissue laid down prior to wounding. This process is initiated by anticlinal and periclinal divisions of a few callus cells only. Later this process extends tangentially to form a continuous belt of wound cambium. Subsequently, this cambium produces both wound xylem and wound phloem and thus contributes to further thickening.
| S-EPMC4233843 | biostudies-literature
Project description:Despite extensive progress, current icephobic materials are limited by the breakdown of their icephobicity in the condensation frosting environment. In particular, the frost formation over the entire surface is inevitable as a result of undesired inter-droplet freezing wave propagation initiated by the sample edges. Moreover, the frost formation directly results in an increased frost adhesion, posing severe challenges for the subsequent defrosting process. Here, we report a hierarchical surface which allows for interdroplet freezing wave propagation suppression and efficient frost removal. The enhanced performances are mainly owing to the activation of the microscale edge effect in the hierarchical surface, which increases the energy barrier for ice bridging as well as engendering the liquid lubrication during the defrosting process. We believe the concept of harnessing the surface morphology to achieve superior performances in two opposite phase transition processes might shed new light on the development of novel materials for various applications.
| S-EPMC3755279 | biostudies-literature
Project description:We present experimental evidence for a new mechanism for how smooth surfaces emerge during repetitive sliding contacts, as in polishing. Electron microscopy observations of Ti-6Al-4V surface with a spherical asperity structure-realized via additive manufacturing-during successive polishing stages suggest that asperity-abrasive contacts exhibit viscous behavior, where the asperity material flows in the form of thin (1-10??m) fluid-like layers. Subsequent bridging of these layers among neighboring asperities results in progressive surface smoothening. Using analytical asperity-abrasive contact temperature modeling and microstructural characterization, we show that the sliding contacts encounter flash temperatures of the order of 700-900?K which is in the range of the dynamic recrystallization temperature of the material considered, thus supporting the experimental observations. Besides providing a new perspective on the long-held mechanism of polishing, our observations provide a novel approach based on graph theory to quantitatively characterize the evolution of surface morphology. Results suggest that the graph representation offers a more efficient measure to characterize the surface morphology emerging at various stages of polishing. The research findings and observations are of broad relevance to the understanding of plastic flow behavior of sliding contacts ubiquitous in materials processing, tribology, and natural geological processes as well as present unique opportunities to tailor the microstructures by controlling the thermomechanics of the asperity-abrasive contacts.
| S-EPMC6650475 | biostudies-literature
Project description:Implant-associated infections are threatening and devastating complications that lead to bone destruction and loss. As a smooth surface is suitable for inhibiting bacterial adhesion, endowing antibacterial activity to the Ti surface without any structural changes in the surface topography is an effective strategy for preventing infection. The thin film on the Ti-6Al-4 V surface was functionalized to endow antibacterial activity by immersion in a Cu(OH)2 solution. The resulting surface maintains the surface topography with a surface roughness of 0.03 μm even after the immersion in the Cu(OH)2 solution. Moreover, Cu was detected at approximately 10 atom% from the surface and was present up to a depth of 30 nm of thin film. In vitro experiments revealed that the resulting surface exhibited antibacterial activity against methicillin-resistant Staphylococcus aureus and allowed the cellular proliferation, differentiation, and calcification of MC3T3-E1 cells. Furthermore, in vivo experiments determined that the presence of Cu in the thin film on the Ti-6Al-4 V surface led to no inflammatory reactions, including bone resorption. Thus, immersion in a Cu(OH)2 solution incorporates and immobilizes Cu into the thin film on the Ti-6Al-4 V surface without any structural alternations in the surface topography, and the resulting smooth surface exhibits antibacterial activity and osteogenic cell compatibility without cytotoxicity or inflammatory reactions. Our findings provide fundamental insights into the surface design of Ti-based medical devices, to achieve bone reconstruction and infection prevention.
| S-EPMC10854433 | biostudies-literature
Project description:The surface of soft solids carries a surface stress that tends to flatten surface profiles. For example, surface features on a soft solid, fabricated by moulding against a stiff-patterned substrate, tend to flatten upon removal from the mould. In this work, we derive a transfer function in an explicit form that, given any initial surface profile, shows how to compute the shape of the corresponding flattened profile. We provide analytical results for several applications including flattening of one-dimensional and two-dimensional periodic structures, qualitative changes to the surface roughness spectrum, and how that strongly influences adhesion.
| S-EPMC7735300 | biostudies-literature