Microelectrode Arrays, Dihydroxylation, and the Development of an Orthogonal Safety-Catch Linker.
Ontology highlight
ABSTRACT:
SUBMITTER: Yeh NH
PROVIDER: S-EPMC8815274 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:A "safety-catch" linker strategy has been used to site-selectively cleave and characterize molecules from a microelectrode array. The linkers are attached to the array by means of an ester and contain either a protected amine or protected alcohol nucleophile that can be released using acid generated at the microelectrodes.
| S-EPMC3950313 | biostudies-literature
Project description:Safety-catch linkers are useful for solid-phase oligosaccharide synthesis as they are orthogonal to many common protective groups. A new acylsulfonamide safety-catch linker was designed, synthesized and employed during glycosylations using an automated carbohydrate synthesizer. The analysis of the cleavage products revealed shortcomings for oligosaccharide synthesis.
| S-EPMC3511041 | biostudies-literature
Project description:Thin-film polymer microelectrode arrays (MEAs) facilitate the high-resolution neural recording with its superior mechanical compliance. However, the densely packed electrodes and interconnects along with the ultra-thin polymeric encapsulation/substrate layers give rise to non-negligible crosstalk, which could result in severe interference in the neural signal recording. Due to the lack of standardized characterization or modeling of crosstalk in neural electrode arrays, to date, crosstalk in polymer MEAs remains poorly understood. In this work, the crosstalk between two adjacent polymer microelectrodes is measured experimentally and modeled using equivalent circuits. Importantly, this study demonstrated a two-well measuring platform and systematically characterized the crosstalk in polymer microelectrodes with true isolation of the victim channel and precise control of its grounding condition. A simple, unified equation from detailed circuit modeling was proposed to calculate the crosstalk in different environments. Finite element analysis (FEA) analysis was conducted further to explore the crosstalk in more aggressively scaled polymer electrode threads. In addition to standardizing neural electrode array crosstalk characterization, this study not only reveals the dependence of the crosstalk in polymer MEAs on a variety of key device parameters but also provides general guidelines for the design of thin polymer MEAs for high-quality neural signal recording.
| S-EPMC8361849 | biostudies-literature
Project description:A fluorous-tagged "safety catch" linker is described for the synthesis of heterocycles with use of ring-closing metathesis. The linker facilitates the purification of metathesis substrates, the removal of the catalyst, the functionalization of the products, and the release of only metathesis products. The synthesis of a range of heterocycles is described.
| S-EPMC2662370 | biostudies-literature
Project description:Brain organoids are important models for mimicking some three-dimensional (3D) cytoarchitectural and functional aspects of the brain. Multielectrode arrays (MEAs) that enable recording and stimulation of activity from electrogenic cells offer notable potential for interrogating brain organoids. However, conventional MEAs, initially designed for monolayer cultures, offer limited recording contact area restricted to the bottom of the 3D organoids. Inspired by the shape of electroencephalography caps, we developed miniaturized wafer-integrated MEA caps for organoids. The optically transparent shells are composed of self-folding polymer leaflets with conductive polymer-coated metal electrodes. Tunable folding of the minicaps' polymer leaflets guided by mechanics simulations enables versatile recording from organoids of different sizes, and we validate the feasibility of electrophysiology recording from 400- to 600-μm-sized organoids for up to 4 weeks and in response to glutamate stimulation. Our studies suggest that 3D shell MEAs offer great potential for high signal-to-noise ratio and 3D spatiotemporal brain organoid recording.
| S-EPMC9385157 | biostudies-literature
Project description:High-density microelectrode arrays can be used to record extracellular action potentials from hundreds to thousands of neurons simultaneously. Efficient spike sorters must be developed to cope with such large data volumes. Most existing spike sorting methods for single electrodes or small multielectrodes, however, suffer from the "curse of dimensionality" and cannot be directly applied to recordings with hundreds of electrodes. This holds particularly true for the standard reference spike sorting algorithm, principal component analysis-based feature extraction, followed by k-means or expectation maximization clustering, against which most spike sorters are evaluated. We present a spike sorting algorithm that circumvents the dimensionality problem by sorting local groups of electrodes independently with classical spike sorting approaches. It is scalable to any number of recording electrodes and well suited for parallel computing. The combination of data prewhitening before the principal component analysis-based extraction and a parameter-free clustering algorithm obviated the need for parameter adjustments. We evaluated its performance using surrogate data in which we systematically varied spike amplitudes and spike rates and that were generated by inserting template spikes into the voltage traces of real recordings. In a direct comparison, our algorithm could compete with existing state-of-the-art spike sorters in terms of sensitivity and precision, while parameter adjustment or manual cluster curation was not required. NEW & NOTEWORTHY We present an automatic spike sorting algorithm that combines three strategies to scale classical spike sorting techniques for high-density microelectrode arrays: 1) splitting the recording electrodes into small groups and sorting them independently; 2) clustering a subset of spikes and classifying the rest to limit computation time; and 3) prewhitening the spike waveforms to enable the use of parameter-free clustering. Finally, we combined these strategies into an automatic spike sorter that is competitive with state-of-the-art spike sorters.
| S-EPMC6314465 | biostudies-literature
Project description:Advanced optical imaging techniques address important biological questions in neuroscience, where structures such as synapses are below the resolution limit of a conventional microscope. At the same time, microelectrode arrays (MEAs) are indispensable in understanding the language of neurons. Here, the authors show transparent MEAs capable of recording action potentials from neurons and compatible with advanced microscopy. The electrodes are made of the conducting polymer poly(3,4-ethylenedioxythiophene) doped with polystyrene sulfonate (PEDOT:PSS) and are patterned by optical lithography, ensuring scalable fabrication with good control over device parameters. A thickness of 380 nm ensures low enough impedance and >75% transparency throughout the visible part of the spectrum making them suitable for artefact-free recording in the presence of laser illumination. Using primary neuronal cells, the arrays record single units from multiple nearby sources with a signal-to-noise ratio of 7.7 (17.7 dB). Additionally, it is possible to perform calcium (Ca2+) imaging, a measure of neuronal activity, using the novel transparent electrodes. Different biomarkers are imaged through the electrodes using conventional and super-resolution microscopy (SRM), showing no qualitative differences compared to glass substrates. These transparent MEAs pave the way for harnessing the synergy between the superior temporal resolution of electrophysiology and the selectivity and high spatial resolution of optical imaging.
| S-EPMC9539726 | biostudies-literature
Project description:In this study, we report nanopatterned Nafion microelectrode arrays for in vitro cardiac electrophysiology. With the aim of defining sophisticated Nafion nanostructures with highly ionic conductivity, fabrication parameters such as Nafion concentration and curing temperature were optimized. By increasing curing temperature and Nafion concentration, we were able to control the replication fidelity of Nafion nanopatterns when copied from a PDMS master mold. We also found that cross-sectional morphology and ion current density of nanopatterned Nafion strongly depends on the fabrication parameters. To investigate this dependency, current-voltage analysis was conducted using organic electrochemical transistors (OECT) overlaid with patterned Nafion substrates. Nanopatterned Nafion was found to allow higher ion current densities than unpatterned surfaces. Furthermore, higher curing temperatures were found to render Nafion layers with higher ion/electrical transfer properties. To optimize nanopattern dimensions, electrical current flows, and film uniformity, a final configuration consisting of 5% nanopatterned Nafion cured at 65°C was chosen. Multielectrode arrays (MEAs) were then covered with optimized Nafion nanopatterns and used for electrophysiological analysis of two types of induced pluripotent stem cell-derived cardiomyocytes (iPSCs-CMs). These data highlight the suitability of nanopatterned Nafion, combined with MEAs, for enhancing the cellular environment of iPSC-CMs for use in electrophysiological analysis in vitro.
| S-EPMC7688058 | biostudies-literature
Project description:OBJECTIVE:Individual carbon fiber microelectrodes can record unit activity in both acute and semi-chronic (?1 month) implants. Additionally, new methods have been developed to insert a 16 channel array of carbon fiber microelectrodes. Before assessing the in vivo long-term viability of these arrays, accelerated soak tests were carried out to determine the most stable site coating material. Next, a multi-animal, multi-month, chronic implantation study was carried out with carbon fiber microelectrode arrays and silicon electrodes. APPROACH:Carbon fibers were first functionalized with one of two different formulations of PEDOT and subjected to accelerated aging in a heated water bath. After determining the best PEDOT formula to use, carbon fiber arrays were chronically implanted in rat motor cortex. Some rodents were also implanted with a single silicon electrode, while others received both. At the end of the study a subset of animals were perfused and the brain tissue sliced. Tissue sections were stained for astrocytes, microglia, and neurons. The local reactive responses were assessed using qualitative and quantitative methods. MAIN RESULTS:Electrophysiology recordings showed the carbon fibers detecting unit activity for at least 3 months with average amplitudes of ?200 ?V. Histology analysis showed the carbon fiber arrays with a minimal to non-existent glial scarring response with no adverse effects on neuronal density. Silicon electrodes showed large glial scarring that impacted neuronal counts. SIGNIFICANCE:This study has validated the use of carbon fiber microelectrode arrays as a chronic neural recording technology. These electrodes have demonstrated the ability to detect single units with high amplitude over 3 months, and show the potential to record for even longer periods. In addition, the minimal reactive response should hold stable indefinitely, as any response by the immune system may reach a steady state after 12 weeks.
| S-EPMC5118062 | biostudies-literature
Project description:Cardiomyocytes (CMs) and fibroblast cells are two essential elements for cardiac tissue structure and function. The interactions between them can alter cardiac electrophysiology and thus contribute to cardiac diseases, such as arrhythmogenesis. One possible explanation is that fibroblasts can directly affect cardiac electrophysiology through electrical coupling with CMs. Therefore, detecting the electrical activities in the CM-fibroblast network is vital for understanding the coupling dynamics among them. Current commercialized platforms for studying cardiac electrophysiology utilize planar microelectrode arrays (MEAs) to record the extracellular field potential (FP) in real-time, but the prearranged electrode configuration highly limits the measurement capabilities at specific locations. Here, we report a custom-designed MEA device with a novel micropatterning method to construct a controlled network of neonatal rat CMs (rCMs) and fibroblast connections for monitoring the electrical activity of rCM-fibroblast co-cultures in a spatially controlled fashion. For the micropatterning of the co-culture, surface topographical features and mobile blockers were used to control the initial attachment locations of a mixture of rCMs and fibroblasts, to form separate beating rCM-fibroblast clusters while leaving empty space for fibroblast growth to connect these clusters. Once the blockers are removed, the proliferating fibroblasts connect and couple the separate beating clusters. Using this method, electrical activity of both rCMs and human-induced-pluripotent-stem-cell-derived cardiomyocytes (iCMs) was examined. The coupling dynamics were studied through the extracellular FP and impedance profile recorded from the MEA device, indicating that the fibroblast bridge provided an RC-type coupling of physically separate rCM-containing clusters and enabled synchronization of these clusters.
| S-EPMC8619285 | biostudies-literature