Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Effect of Moisture on Polymer Deconstruction in HCl Gas Hydrolysis of Wood.

ABSTRACT: The HCl gas system previously used to produce cellulose nanocrystals was applied on Scots pine wood, aiming at a controlled deconstruction of its macrostructure while understanding the effect on its microstructure. The HCl gas treatments resulted in a well-preserved cellular structure of the wood. Differences in wood initial moisture content (iMC) prior to HCl gas treatment played a key role in hydrolysis rather than the studied range of exposure time to the acidic gas. Higher iMCs were correlated with a higher degradation of hemicellulose, while crystalline cellulose microfibrils were not largely affected by the treatments. Remarkably, the hydrogen-deuterium exchange technique showed an increase in accessible OH group concentration at higher iMCs, despite the additional loss in hemicelluloses. Unrelated to changes in the accessible OH group concentration, the HCl gas treatment reduced the concentration of absorbed D₂O molecules.

SUBMITTER: Lourencon T

PROVIDER: S-EPMC8892909 | biostudies-literature | 2022 Mar

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Effect of Moisture on Polymer Deconstruction in HCl Gas Hydrolysis of Wood.

Lourençon Tainise T Altgen Michael M Pääkkönen Timo T Guccini Valentina V Penttilä Paavo P Kontturi Eero E Rautkari Lauri L

ACS omega 20220216 8

The HCl gas system previously used to produce cellulose nanocrystals was applied on Scots pine wood, aiming at a controlled deconstruction of its macrostructure while understanding the effect on its microstructure. The HCl gas treatments resulted in a well-preserved cellular structure of the wood. Differences in wood initial moisture content (iMC) prior to HCl gas treatment played a key role in hydrolysis rather than the studied range of exposure time to the acidic gas. Higher iMCs were correlat ...[more]

PMID: 35252698

Similar Datasets

Enhanced Production of Furfural via Methanolysis of Wood Biomass with HCl Gas.

Project description:This study explores the production of furfural, xylose and methylxylosides through the methanolysis of wood flour using anhydrous HCl gas. The process involves methanolysis of wood flour with HCl gas under pressure to generate methylxylosides, which are subsequently converted to xylose and furfural via autohydrolysis in a Parr batch reactor system. The methanolysis was conducted in temperature-controlled HCl gas reactor employing 24 h reaction time and 50 % methanol content in wood flour. During the methanolysis step with HCl gas, 65 % of the available xylan in wood flour was converted to water-soluble methylxylosides, xylose, xylooligosaccharides (XO) and water-soluble methyl xylooligosaccharides (MXO). Methanolysis filtrates were then autohydrolyzed with Parr 50 mL batch reactor system to xylose and furfural in two different pH values at 180 °C. The highest furfural yield of 91 % from methanolysis filtrate was achieved with pH 1.2 and 25 min reaction time.

| S-EPMC11789968 | biostudies-literature

Moisture Dynamics of Wood-Based Panels and Wood Fibre Insulation Materials.

Project description:Moisture performance is an important factor determining the resistance of wood-based building materials against fungal decay. Understanding how material porosity and chemistry affect moisture performance is necessary for their efficient use, as well as for product optimisation. In this study, three complementary techniques (X-ray computed tomography, infrared and low-field NMR spectroscopy) are applied to elucidate the influence of additives, manufacturing process and material structure on the liquid water absorption and desorption behaviour of a selection of wood-based panels, thermally modified wood and wood fibre insulation materials. Hydrophobic properties achieved by thermal treatment or hydrophobic additives such as paraffin and bitumen, had a major influence on water absorption and desorption rates. When hydrophobic additives did not play a role, pore distributions and manufacturing process had a decisive influence on the amount and rate of absorption and desorption. In that case, a higher porosity resulted in a higher water absorption rate. Our results show that there is a clear potential for tailoring materials towards specific moisture performance by better understanding the influence of different material characteristics. This is useful both for achieving desired moisture buffering as well as to increase service life of wood-based materials. From a sustainability perspective, fit-for-purpose moisture performance is often easier to achieve and preferred than wood protection by biocide preservative treatments.

| S-EPMC9330446 | biostudies-literature

Modified Wood Fibers Spontaneously Harvest Electricity from Moisture.

Project description:With the rapid development of modern society, our demand for energy is increasing. And the extensive use of fossil energy has triggered a series of problems such as an energy crisis and environmental pollution. A moisture-enabled electric generator (MEG) is a new type of energy conversion method, which can directly convert the ubiquitous moisture in the air into electrical energy equipment. It has attracted great interest for its renewable and environmentally friendly qualities. At present, most MEGs still have low power density, strong dependence on high humidity, and high cost. Herein, we report the development of a high-efficiency MEG based on a lignocellulosic fiber frame with high-power-density, all-weather, and low-cost characteristics using a simple strategy that optimizes the charge transport channel and ion concentration difference. The MEG devices we manufactured can generate the open-circuit voltage of 0.73 V and the short-circuit current of 360 μA, and the voltage can still reach 0.6 V at less than 30% humidity. It is possible to drive commercial electronic devices such as light-emitting diodes, electronic displays, and electronic calculators by simply connecting several electric generators in series. Biomass-based moisture-enabled electric generation has a low cost, is easy to integrate on a large scale, and is green and pollution-free, providing clean energy for low-humidity or high-electricity-cost areas.

| S-EPMC10818770 | biostudies-literature

The effect of soil nutrients and moisture during ontogeny on apparent wood density of Eucalyptus grandis.

Project description:Knowledge of the effect of soil nutrients, such as K and Na and their interaction with water availability, on the growth and wood properties of the eucalypts, is needed to increase the productivity of commercial plantation forests in Brazil that generate employment and taxes. The present study evaluates the apparent wood density (at 12% wood moisture) of Eucalyptus grandis trees at 12, 24, 36 and 48 months old under ambient and lower than ambient (66%) rainfall conditions and K and Na nutrient enrichment. The treatments were two water availability (100 and 66% of the rainfall) and the three nutrient treatments were: K (4.5 kmol/ha), Na (4.5 kmol/ha) and a control (natural conditions). The apparent wood density of samples at breast height (1.3?m) was determined by X-ray densitometry and digital images. Increased nutrients at all four ages and water availability at 36 and 48 months reduced apparent wood density in E. grandis trees, however, effects of nutrients are lower under water availability reduction. The radial profile of wood density was higher in four-year-old trees, but there was radial variation in apparent wood density at all ages. These findings predict that, under water stress, apparent wood density will not decline in commercial E. grandis plantations fertilized with potassium. The use of sodium, as a substitute of potassium, should consider their negative impacts on wood density of Eucalyptus grandis trees.

| S-EPMC7018959 | biostudies-literature

Nanoscale Mechanism of Moisture-Induced Swelling in Wood Microfibril Bundles.

Project description:Understanding nanoscale moisture interactions is fundamental to most applications of wood, including cellulosic nanomaterials with tailored properties. By combining X-ray scattering experiments with molecular simulations and taking advantage of computed scattering, we studied the moisture-induced changes in cellulose microfibril bundles of softwood secondary cell walls. Our models reproduced the most important experimentally observed changes in diffraction peak locations and widths and gave new insights into their interpretation. We found that changes in the packing of microfibrils dominate at moisture contents above 10-15%, whereas deformations in cellulose crystallites take place closer to the dry state. Fibrillar aggregation is a significant source of drying-related changes in the interior of the microfibrils. Our results corroborate the fundamental role of nanoscale phenomena in the swelling behavior and properties of wood-based materials and promote their utilization in nanomaterials development. Simulation-assisted scattering analysis proved an efficient tool for advancing the nanoscale characterization of cellulosic materials.

| S-EPMC9284609 | biostudies-literature

Termites manipulate moisture content of wood to maximize foraging resources.

Project description:Animals use cues to find their food, in microhabitats within their physiological tolerances. Termites build and modify their microhabitat, to transform hostile environments into benign ones, which raises questions about the relative importance of cues. Termites are desiccation intolerant and foraging termites are attracted to water, so most research has considered moisture to be a cue. However, termites can also transport water to food, and so moisture may play other roles than previously considered. To examine the role of moisture, we compared Coptotermes acinaciformis termite foraging decisions in laboratory experiments when they were offered dry and moist wood, with and without load. Without load, termites preferred moist wood and ate it without any building, whereas they moistened dry wood after wrapping it in a layer of clay. For the 'With load' units, termites substituted some of the wood for load-bearing clay walls, and kept the wood drier than on the unloaded units. As drier wood has higher compressive strength and higher rigidity, it allows more of the wood to be consumed. These results suggest that moisture plays a more important role in termite ecology than previously thought. Termites manipulate the moisture content according to the situational context and use it for multiple purposes: increased moisture levels soften the fibre, which facilitates foraging, yet keeping the wood dry provides higher structural stability against buckling which is especially important when foraging on wood under load.

| S-EPMC6684979 | biostudies-literature

Enzymatic hydrolysis of biomass from wood.

Project description:Current research and development in cellulosic ethanol production has been focused mainly on agricultural residues and dedicated energy crops such as corn stover and switchgrass; however, woody biomass remains a very important feedstock for ethanol production. The precise composition of hemicellulose in the wood is strongly dependent on the plant species, therefore different types of enzymes are needed based on hemicellulose complexity and type of pretreatment. In general, hardwood species have much lower recalcitrance to enzymes than softwood. For hardwood, xylanases, beta-xylosidases and xyloglucanases are the main hemicellulases involved in degradation of the hemicellulose backbone, while for softwood the effect of mannanases and beta-mannosidases is more relevant. Furthermore, there are different key accessory enzymes involved in removing the hemicellulosic fraction and increasing accessibility of cellulases to the cellulose fibres improving the hydrolysis process. A diversity of enzymatic cocktails has been tested using from low to high densities of biomass (2-20% total solids) and a broad range of results has been obtained. The performance of recently developed commercial cocktails on hardwoods and softwoods will enable a further step for the commercialization of fuel ethanol from wood.

| S-EPMC4767290 | biostudies-other

QCM-Based HCl Gas Sensors Using Spin-Coated Aminated Polystyrene Colloids.

Project description:Hydrogen chloride (HCl) gas is highly toxic to the human body. Therefore, HCl gas detection sensors should be installed at workplaces where trace HCl gas is continuously generated. Even though various polymer-based HCl-gas-sensing films have been developed, simpler and novel sensing platforms should be developed to ensure the cost effectiveness and reusability of the sensing platforms. Therefore, we present a simple strategy to fabricate reusable HCl-gas-sensing platforms using aminated polystyrene (a-PS) colloids and investigate their sensitivity, reusability, and selectivity using a quartz crystal microbalance (QCM). The reusable a-PS(1.0) colloidal sensor with a high degree of amination (DA) exhibited the highest binding capacity (102 μg/mg) based on the frequency change (Δf) during the HCl gas adsorption process. Further, its sensitivity and limit of detection (LOD) were 3.88 Hz/ppm and 5.002 ppm, respectively, at a low HCl gas concentration (<10 ppm). In addition, the sensitivity coefficient (k*) of the a-PS(1.0) colloid sensor with respect to HCHO was higher than that in the case of HF because of the lower binding affinity of the former with the a-PS(1.0) colloids. Based on these results, highly sensitive and reproducible a-PS colloids could be reused as an HCl-gas-sensing platform and used as an HCl sorbent in a gas column filter.

| S-EPMC7408365 | biostudies-literature

Wood Composites and Their Polymer Binders.

Project description:This review presents first, rather succinctly, what are the important points to look out for when preparing good wood composites, the main types of wood composites manufactured industrially, and the mainly oil-derived wood composite adhesives and binders that dominate and have been dominating this industry. Also briefly described are the most characteristic biosourced, renewable-derived adhesives that are actively researched as substitutes. For all these adhesives, synthetic and biosourced, the reviews expose the considerable progresses which have occurred relatively recently, with a host of new approaches and ideas having been proposed and tested, some even implemented, but with even many more already appearing on the horizon.

| S-EPMC7285055 | biostudies-literature

Effect of Modified Red Pottery Clay on the Moisture Absorption Behavior and Weatherability of Polyethylene-Based Wood-Plastic Composites.

Project description:Red pottery clay (RPC) was modified using a silane coupling agent, and the modified RPC (mRPC) was then used to enhance the performance of high-density polyethylene-based wood-plastic composites. The effect of the mRPC content on the performances of the composites was investigated through Fourier transform infrared spectrometry, differential mechanical analysis (DMA) and ultraviolet (UV)-accelerated aging tests. After adding the mRPC, a moisture adsorption hysteresis was observed. The DMA results indicated that the mRPC effectively enhanced the rigidity and elasticity of the composites. The mRPC affected the thermal gravimetric, leading to a reduction of the thermal degradation rate and a right-shift of the thermal degradation peak; the initial thermal degradation temperature was increased. After 3000 h of UV-accelerated aging, the flexural strength and impact strength both declined. For aging time between 0 and 1000 h, the increase in amplitude of ΔL* (luminescence) and ΔE* (color) reached a maximum; the surface fading did not became obvious. ΔL* and ΔE* increased more significantly between 1000 and 2000 h. These characterization results indicate that the chromophores of the mRPC became briefly active. However, when the aging times were higher than 2000 h, the photo-degradation reaction was effectively prevented by adding the mRPC. The best overall enhancement was observed for an mRPC mass percentage of 5%, with a storage modulus of 3264 MPa and an increase in loss modulus by 16.8%, the best anti-aging performance and the lowest degree of color fading.

| S-EPMC5459118 | biostudies-other

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data