Dataset Information

A Multiband Shared Aperture MIMO Antenna for Millimeter-Wave and Sub-6GHz 5G Applications.

ABSTRACT: A shared aperture 2-element multiple-input-multiple-output (MIMO) antenna design for 5G standards is presented in this study, one which uses the same radiating structure to cover both the sub-6GHz and millimeter-wave (millimeter-wave) bands. The proposed antenna comprises four concentric pentagonal slots that are uniformly separated from one another. For the sub-6GHz band, the antenna is excited by a single open-end microstrip transmission-line, while a 1 × 8 power divider (PD) connected via a T-junction structure excites the millimeter-wave band. Both the sub-6GHz and mm-wave antennas operate in a MIMO configuration. The proposed antenna design was fabricated on a 120 × 60 mm2 substrate with an edge-to-edge distance of 49 mm. The proposed sub-6GHz antenna covers the following frequency bands: 4-4.5 GHz, 3.1-3.8 GHz, 2.48-2.9 GHz, 1.82-2.14 GHz, and 1.4-1.58 GHz, while the millimeter-wave antenna operates at 28 GHz with at least 500 MHz of bandwidth. A complete antenna analysis is provided via a step-by-step design procedure, an equivalent circuit diagram showing the operation of the shared aperture antenna, and current density analysis at both millimeter-wave and sub-6GHz bands. The proposed antenna design is also characterized in terms of MIMO performance metrics with a good MIMO operation with maximum envelop correlation coefficient value of 0.113. The maximum measured gain and efficiency values obtained were 91% and 8.5 dBi over the entire band of operation. The antenna is backward compatible with 4G bands and also encompasses the sub-6GHz and 28 GHz bands for future 5G wireless communcation systems.

SUBMITTER: Hussain R

PROVIDER: S-EPMC8915104 | biostudies-literature | 2022 Feb

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

A Multiband Shared Aperture MIMO Antenna for Millimeter-Wave and Sub-6GHz 5G Applications.

Hussain Rifaqat R Abou-Khousa Mohamed M Iqbal Naveed N Algarni Abdullah A Alhuwaimel Saad I SI Zerguine Azzedine A Sharawi Mohammad S MS

Sensors (Basel, Switzerland) 20220225 5

A shared aperture 2-element multiple-input-multiple-output (MIMO) antenna design for 5G standards is presented in this study, one which uses the same radiating structure to cover both the sub-6GHz and millimeter-wave (millimeter-wave) bands. The proposed antenna comprises four concentric pentagonal slots that are uniformly separated from one another. For the sub-6GHz band, the antenna is excited by a single open-end microstrip transmission-line, while a 1 × 8 power divider (PD) connected via a T ...[more]

PMID: 35270955

Similar Datasets

Project description:As an alternative to laser-based methods, we developed a novel in situ cell isolation method and instrument based on local water absorption of millimeter wave (MMW) radiation that occurs in cellular material and nearby culture medium while the cultureware materials (plastic and glass) are transparent to MMW frequencies. Unwanted cells within cell population are targeted with MMWs in order to kill them by overheating. The instrument rapidly (within 2-3 seconds) heats a cell culture area of about 500 µm in diameter to 50 °C using a low-power W-band (94 GHz) MMW source. Heated cells in the area detach from the substrate and can be removed by a media change leaving a bare spot. Hence we named the instrument "CellEraser". Quick, local and non-contact heating with sharp boundaries of the heated area allows elimination of the unwanted cells without affecting the neighboring cells. The instrument is implemented as a compact microscope attachment and the selective hyperthermic treatment can be done manually or in an automated mode. Mammalian cells heated even momentarily above 50 °C will not survive. This "temperature of no return" does not compromise cellular membranes nor does it denature proteins. Using the CellEraser instrument we found that the key event that determines the fate of a cell at elevated temperatures is whether or not the selectivity of its nucleus is compromised. If a cell nucleus becomes "leaky" allowing normally excluded (cytoplasmic) proteins in and normally nuclear-localized proteins out, that cell is destined to die. Quick heating by MMWs to higher temperatures (70 °C) denatures cellular proteins but the cells are not able to detach from the substrate - instead they undergo a phenomenon we called "thermofixation": such cells look similar to cells fixed with common chemical fixatives. They remain flat and are not washable from the substrate. Interestingly, their membranes become permeable to DNA dyes and even to antibodies. Thermofixation allows the use of western blot antibodies for immunofluorescence imaging.

Dataset Information

A Multiband Shared Aperture MIMO Antenna for Millimeter-Wave and Sub-6GHz 5G Applications.

Publications

A Multiband Shared Aperture MIMO Antenna for Millimeter-Wave and Sub-6GHz 5G Applications.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets