Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Spectral tuning of colloidal Si nanocrystal luminescence by post-laser irradiation in liquid.

ABSTRACT: We report a simple technique to tune the luminescence spectra of blue-emitting colloidal silicon nanocrystals (Si-ncs) to the ultraviolet region via post-laser irradiation. The post-laser irradiation of the as-prepared colloidal Si-ncs which exhibited a broad photoluminescence (PL) centered at ∼390 nm with a bandwidth of 105 nm caused a spectral peak shift to ∼330 nm and a decrease in the bandwidth to 80 nm. The degree of the spectral tuning can be controlled by changing the irradiated laser power. The spectroscopic and transmittance electron microscopy analysis revealed that this spectral tuning effect is due to the size reduction of Si-ncs by selective absorption of post-irradiated laser light by particular-sized Si-ncs that have bandgap energies resonant with the irradiated photon energy, as well as the resultant ablation of these Si-ncs.

SUBMITTER: Yuan Z

PROVIDER: S-EPMC9056600 | biostudies-literature | 2020 Sep

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Spectral tuning of colloidal Si nanocrystal luminescence by post-laser irradiation in liquid.

Yuan Ze Z Nakamura Toshihiro T

RSC advances 20200907 54

We report a simple technique to tune the luminescence spectra of blue-emitting colloidal silicon nanocrystals (Si-ncs) to the ultraviolet region <i>via</i> post-laser irradiation. The post-laser irradiation of the as-prepared colloidal Si-ncs which exhibited a broad photoluminescence (PL) centered at ∼390 nm with a bandwidth of 105 nm caused a spectral peak shift to ∼330 nm and a decrease in the bandwidth to 80 nm. The degree of the spectral tuning can be controlled by changing the irradiated la ...[more]

PMID: 35516519

Similar Datasets

Waveguide-Integrated Colloidal Nanocrystal Supraparticle Lasers.

Project description:Supraparticle (SP) microlasers fabricated by the self-assembly of colloidal nanocrystals have great potential as coherent optical sources for integrated photonics. However, their deterministic placement for integration with other photonic elements remains an unsolved challenge. In this work, we demonstrate the manipulation and printing of individual SP microlasers, laying the foundation for their use in more complex photonic integrated circuits. We fabricate CdSxSe1-x/ZnS colloidal quantum dot (CQD) SPs with diameters from 4 to 20 μm and Q-factors of approximately 300 via an oil-in-water self-assembly process. Under a subnanosecond-pulse optical excitation at 532 nm, the laser threshold is reached at an average number of excitons per CQD of 2.6, with modes oscillating between 625 and 655 nm. Microtransfer printing is used to pick up individual CQD SPs from an initial substrate and move them to a different one without affecting their capability for lasing. As a proof of concept, a CQD SP is printed on the side of an SU-8 waveguide, and its modes are successfully coupled to the waveguide.

| S-EPMC10683367 | biostudies-literature

Nonvolatile liquid anthracenes for facile full-colour luminescence tuning at single blue-light excitation.

Project description:Nonvolatile room-temperature luminescent molecular liquids are a new generation of organic soft materials. They possess high stability, versatile optical properties, solvent-free fluid behaviour and can effectively accommodate dopant dye molecules. Here we introduce an approach to optimize anthracene-based liquid materials, focussing on enhanced stability, fluorescence quantum yield, colour tunability and processability, with a view to flexible electronic applications. Enveloping the anthracene core in low-viscosity branched aliphatic chains results in stable, nonvolatile, emissive liquid materials. Up to 96% efficient energy-transfer-assisted tunable emission is achieved by doping a minute amount of acceptor dye in the solvent-free state. Furthermore, we use a thermoresponsive dopant to impart thermally controllable luminescence colours. The introduced strategy leading to diverse luminescence colours at a single blue-light excitation can be an innovative replacement for currently used luminescent materials, providing useful continuous emissive layers in developing foldable devices.

| S-EPMC3709479 | biostudies-literature

MoTe2 Field-Effect Transistors with Low Contact Resistance through Phase Tuning by Laser Irradiation.

Project description:Due to their extraordinary electrical and physical properties, two-dimensional (2D) transition metal dichalcogenides (TMDs) are considered promising for use in next-generation electrical devices. However, the application of TMD-based devices is limited because of the Schottky barrier interface resulting from the absence of dangling bonds on the TMDs' surface. Here, we introduce a facile phase-tuning approach for forming a homogenous interface between semiconducting hexagonal (2H) and semi-metallic monoclinic (1T') molybdenum ditelluride (MoTe2). The formation of ohmic contacts increases the charge carrier mobility of MoTe2 field-effect transistor devices to 16.1 cm2 V-1s-1 with high reproducibility, while maintaining a high on/off current ratio by efficiently improving charge injection at the interface. The proposed method enables a simple fabrication process, local patterning, and large-area scaling for the creation of high-performance 2D electronic devices.

| S-EPMC8620056 | biostudies-literature

Si nanocrystal solution with stability for one year.

Project description:Colloidal silicon nanocrystals (SiNCs) are a promising material for next-generation nanostructured devices. High-stability SiNC solutions are required for practical use as well as studies on the properties of SiNC. Here, we show a solution of SiNCs that was stable for one year without aggregation. The stable solution was synthesized by a facile process, i.e., pulsed laser ablation of a Si wafer in isopropyl alcohol (IPA). The long-term stability was due to a large ζ-potential of -50 mV from a SiNC passivation layer composed of oxygen, hydrogen, and alkane groups, according to the results of eight experiments and theoretical calculations. This passivation layer also resulted in good performance as an additive for a conductive polymer film. Namely, a 5-fold enhancement in carrier density was established by the addition of SiNCs into an organic conductive polymer, poly(3-dodecylthiophene), which is useful for solar cells. Furthermore, it was found that fresh (<1 day) and aged (4 months) SiNCs give the same enhancement. The long-term stability was attributed to a great repulsive energy in IPA, whose value was quantified as a function the distance between SiNCs.

| S-EPMC9091691 | biostudies-literature

Crystallinity in periodic nanostructure surface on Si substrates induced by near- and mid-infrared femtosecond laser irradiation.

Project description:Laser-induced periodic surface structure (LIPSS), which has a period smaller than the laser wavelength, is expected to become a potential technique for fine surface processing. We report the microscopic and macroscopic observations of the crystallinity of LIPSSs, where the characteristics such as defects generation and residual strain were analyzed, respectively. The LIPSSs were formed on a Si substrate using two different femtosecond pulses from Ti:Sapphire laser with near-infrared wavelength (0.8 μm) and free-electron laser (FEL) with mid-infrared wavelength (11.4 μm). The photon energies of the former and latter lasers used here are higher and lower than the Si bandgap energies, respectively. These LIPSSs exhibit different crystalline states, where LIPSS induced by Ti:Sapphire laser show residual strain while having a stable crystallinity; in contrast, FEL-LIPSS generates defects without residual strain. This multiple analysis (microscopic and macroscopic observations) provides such previously-unknown structural characteristics with high spatial resolution. To obtain LIPSS with suitable properties and characteristics based on each application it is paramount to identify the laser sources that can achieve such properties. Therefore, identifying the structural information of the LIPSS generated by each specific laser is of great importance.

| S-EPMC9722692 | biostudies-literature

Photoperiodic spectral tuning of carbon metabolism in heterotrophic marine flavobacteria

Project description:Influence of the constant full-spectrum light and short-to-long wavelengths of the visible spectrum (red, green and blue lights) and the significance of 12 h photoperiod was tested on heterotrophic marine flavobacteria Siansivirga zeaxanthinifaciens CC-SAMT-1T. RNA-seq analysis revealed remarkable qualitative and quantitative variations in terms of gene expression in CC-SAMT-1T with respect to incident lights. While blue light illumination stimulated expression of genes involved in inorganic carbon metabolism, green˗red lights largely upregulated the genes participating in high-molecular-weight (HMW) organic carbon metabolism. Constant full-spectrum light also displayed the upregulation of genes involved in the metabolism of HMW organic carbon. Thus, the short-to-long wavelengths of visible light and the 12 h photoperiod most likely to play a key role in the marine carbon cycle by tuning heterotrophic bacterial metabolism.

2020-04-15 | GSE129810 | GEO

The Tuning of LIPSS Wettability during Laser Machining and through Post-Processing.

Project description:In this work, we investigate the fabrication of stainless-steel substrates decorated with laser-induced periodic surface structures (LIPSS) of both hydrophilic and hydrophobic wettability through different post-processing manipulation. In carrying out these experiments, we have found that while a CO2-rich atmosphere during irradiation does not affect final wettability, residence in such an atmosphere after irradiation does indeed increase hydrophobicity. Contrarily, residence in a boiling water bath will instead lead to a hydrophilic surface. Further, our experiments show the importance of removing non-sintered nanoparticles and agglomerates after laser micromachining. If they are not removed, we demonstrate that the nanoparticle agglomerates themselves become hydrophobic, creating a Cassie air-trapping layer on the surface which presents with water contact angles of 180°. However, such a surface lacks robustness; the particles are removed with the contacting water. What is left behind are LIPSS which are integral to the surface and have largely been blocked from reacting with the surrounding atmosphere. The actual surface presents with a water contact angle of approximately 80°. Finally, we show that chemical reactions on these metallic surfaces decorated with only LIPSS are comparatively slower than the reactions on metals irradiated to have hierarchical roughness. This is shown to be an important consideration to achieve the highest degree of hydro-philicity/phobicity possible. For example, repeated contact with water from goniometric measurements over the first 30 days following laser micromachining is shown to reduce the ultimate wettability of the surface to approximately 65°, compared to 135° when the surface is left undisturbed for 30 days.

| S-EPMC8069829 | biostudies-literature

Extensive Characterization of Oxide-Coated Colloidal Gold Nanoparticles Synthesized by Laser Ablation in Liquid.

Project description:Colloidal gold nanoparticles are a widespread nanomaterial with many potential applications, but their aggregation in suspension is a critical issue which is usually prevented by organic surfactants. This solution has some drawbacks, such as material contamination and modifications of its functional properties. The gold nanoparticles presented in this work have been synthesized by ultra-fast laser ablation in liquid, which addresses the above issues by overcoating the metal nanoparticles with an oxide layer. The main focus of the work is in the characterization of the oxidized gold nanoparticles, which were made first in solution by means of dynamic light scattering and optical spectroscopy, and then in dried form by transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and finally by surface potential measurements with atomic force microscopy. The light scattering assessed the nanoscale size of the formed particles and provided insight in their stability. The nanoparticles' size was confirmed by direct imaging in transmission electron microscopy, and their crystalline nature was disclosed by X-ray diffraction. The X-ray photoelectron spectroscopy showed measurements compatible with the presence of surface oxide, which was confirmed by the surface potential measurements, which are the novel point of the present work. In conclusion, the method of laser ablation in liquid for the synthesis of gold nanoparticles has been presented, and the advantage of this physical approach, consisting of coating the nanoparticles in situ with gold oxide which provides the required morphological and chemical stability without organic surfactants, has been confirmed by using scanning Kelvin probe microscopy for the first time.

| S-EPMC5457073 | biostudies-other

Direct probe of spectral inhomogeneity reveals synthetic tunability of single-nanocrystal spectral linewidths.

Project description:The spectral linewidth of an ensemble of fluorescent emitters is dictated by the combination of single-emitter linewidths and sample inhomogeneity. For semiconductor nanocrystals, efforts to tune ensemble linewidths for optical applications have focused primarily on eliminating sample inhomogeneities, because conventional single-molecule methods cannot reliably build accurate ensemble-level statistics for single-particle linewidths. Photon-correlation Fourier spectroscopy in solution (S-PCFS) offers a unique approach to investigating single-nanocrystal spectra with large sample statistics and high signal-to-noise ratios, without user selection bias and at fast timescales. With S-PCFS, we directly and quantitatively deconstruct the ensemble linewidth into contributions from the average single-particle linewidth and from sample inhomogeneity. We demonstrate that single-particle linewidths vary significantly from batch to batch and can be synthetically controlled. These findings delineate the synthetic challenges facing underdeveloped nanomaterials such as InP and InAs core-shell particles and introduce new avenues for the synthetic optimization of fluorescent nanoparticles.

| S-EPMC3843964 | biostudies-literature

Calcination does not remove all carbon from colloidal nanocrystal assemblies.

Project description:Removing organics from hybrid nanostructures is a crucial step in many bottom-up materials fabrication approaches. It is usually assumed that calcination is an effective solution to this problem, especially for thin films. This assumption has led to its application in thousands of papers. We here show that this general assumption is incorrect by using a relevant and highly controlled model system consisting of thin films of ligand-capped ZrO2 nanocrystals. After calcination at 800 °C for 12 h, while Raman spectroscopy fails to detect the ligands after calcination, elastic backscattering spectrometry characterization demonstrates that ~18% of the original carbon atoms are still present in the film. By comparison plasma processing successfully removes the ligands. Our growth kinetic analysis shows that the calcined materials have significantly different interfacial properties than the plasma-processed counterparts. Calcination is not a reliable strategy for the production of single-phase all-inorganic materials from colloidal nanoparticles.

| S-EPMC5725572 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data