A novel strategy to purify conductive polymer particles.
Ontology highlight
ABSTRACT:
SUBMITTER: Spence D
PROVIDER: S-EPMC9060582 | biostudies-literature | 2019 Feb
REPOSITORIES: biostudies-literature
Publications
A novel strategy to purify conductive polymer particles.
Spence Daron D Polizos Georgios G Joshi Pooran P Sharma Jaswinder J
RSC advances 20190208 9
The purification of conductive polymer (<i>e.g.</i>, polyaniline) particles is a challenging task, especially when the particle size is small. Herein, we demonstrate a unique strategy (electrode-based) to purify polyaniline particles by exploiting the difference in surface charge between particles and surfactants, and compare the results with a commonly used purification strategy (washing). ...[more]
Similar Datasets
Project description:Electrically insulating graphite particles were prepared by coating graphite with electrically insulating materials via a two-step mechanical mixing process. Graphite particles were treated with a binder in the 1st mixing process and coated with an electrically insulating particle in the 2nd mixing process under high shear forces within a short processing time (below 1 min). Micron-sized graphite particles were successfully coated with various inorganic particles of appropriate particle diameter. Talc and boron nitride exhibited good affinities with graphite and formed effective coating layers to render reliable electrical insulation. Graphite coated with talc and boron nitride exhibited a high volume resistivity, greater than 109 Ω cm. The insulating property was retained even after compounding and moulding the coated graphite particles with a polymer. The two-step coating process under high shear forces is a promising method for production of coated graphite particles.
| S-EPMC9080288 | biostudies-literature
Project description:Despite efforts to mature human pluripotent stem cell-derived cardiomyocytes (hPSC-CMs) for disease modeling and high throughput screening, cells remain immature and may not reflect adult biology. Recent advancements utilize electro-mechanical and paracrine stimulation to functionally mature cardiomyocytes, but the resulting engineered constructs continue to lack a microenvironment conducive to electrical signal propagation and maturity. Conductive polymers are attractive candidates to facilitate electrical communication between gaps in sparse hPSC-CM clusters or between hPSC-CMs to repair conduction defects. To create a conductive polymer platform for improved electrical signal propagation between hPSC-CMs and achieve electrical maturity, we electrospun poly(3,4-ethylendioxythiophene):polystyrene sulfonate (PEDOT:PSS) blended with 8% (w/v) poly(vinyl alcohol) (PVA). Matrix fiber structure remained stable over 4 weeks in buffer, stiffness remains near cardiac stiffness in vivo, and electrical conductivity scaled with PEDOT:PSS concentration. When fibroblasts were added to fibers, cells had higher initial attachment to PEDOT:PSS compared to PVA-only scaffolds, and after 5 days, over 90% of fibroblasts remained viable on PEDOT:PSS scaffolds compared to PVA-only scaffolds. Electrically excitable hPSC-CMs cultured on conductive substrates exhibited an upregulation of cardiac and muscle-related genes as opposed to non-conductive substrates. These cells further displayed increased desmoplakin (DP) localization on conductive scaffolds, indicating an improvement in the mechanical stability of our hPSC-CMs. Sarcomere organization also scaled with increasing PEDOT:PSS concentration, even in sub-monolayer cell densities, suggesting that improved organization of the contractile machinery in these cells was due to the electrical condition of the matrix. Calcium handling indicated higher calcium flux with a shorter time to peak, further suggesting improved electrical maturity, even when sub-confluent. Taken together, these data suggest that PEDOT:PSS/PVA scaffolds are stable, of a stiffness relevant to cardiomyocytes, and supportive of electrical coupling even in the absence of a monolayer, which may improve cardiac disease modeling and drug development.
2023-12-13 | GSE226541 | GEO
Project description:A novel conductive composite based on PEDOT:PSS, BSA, and Nafion for effective immobilization of acetic acid bacteria on graphite electrodes as part of biosensors and microbial fuel cells has been proposed. It is shown that individual components in the composite do not have a significant negative effect on the catalytic activity of microorganisms during prolonged contact. The values of heterogeneous electron transport constants in the presence of two types of water-soluble mediators were calculated. The use of the composite as part of a microbial biosensor resulted in an electrode operating for more than 140 days. Additional modification of carbon electrodes with nanomaterial allowed to increase the sensitivity to glucose from 1.48 to 2.81 μA × mM-1 × cm-2 without affecting the affinity of bacterial enzyme complexes to the substrate. Cells in the presented composite, as part of a microbial fuel cell based on electrodes from thermally expanded graphite, retained the ability to generate electricity for more than 120 days using glucose solution as well as vegetable extract solutions as carbon sources. The obtained data expand the understanding of the composition of possible matrices for the immobilization of Gluconobacter bacteria and may be useful in the development of biosensors and biofuel cells.
| S-EPMC10857495 | biostudies-literature
Project description:Biomaterials such as seashells are intriguing due to their remarkable properties, including their hierarchical structure from the nanometer to the micro- or even macroscopic scale. Transferring this nanostructure to generate nanostructured polymers can improve their electrical conductivity. Here, we present the synthesis of polypyrrole using waste seashell powder as a template to prepare a polypyrrole/CaCO3 composite material. Various synthesis parameters were optimized to produce a composite material with an electrical conductivity of 2.1 × 10-4 ± 3.2 × 10-5 S/cm. This work presents the transformation of waste seashells into sustainable, electronically conductive materials and their application as an antistatic agent in polymers. The requirements of an antistatic material were met for a safety shoe sole.
| S-EPMC9267058 | biostudies-literature
Project description:BackgroundViruses are a significant component of the intestinal microbiota in mammals. In recent years, advances in sequencing technologies and data analysis techniques have enabled detailed metagenomic studies investigating intestinal viromes (collections of bacteriophage and eukaryotic viral nucleic acids) and their potential contributions to the ecology of the microbiota. An important component of virome studies is the isolation and purification of virus-like particles (VLPs) from intestinal contents or feces. Several methods have been applied to isolate VLPs from intestinal samples, yet to our knowledge, the efficiency and reproducibility between methods have not been explored. A rigorous evaluation of methods for VLP purification is critical as many studies begin to move from descriptive analyses of virus diversity to studies striving to quantitatively compare viral abundances across many samples. Therefore, reproducible VLP purification methods which allow for high sample throughput are needed. Here we compared and evaluated four methods for VLP purification using artificial intestinal microbiota samples of known bacterial and viral composition.ResultsWe compared the following four methods of VLP purification from fecal samples: (i) filtration + DNase, (ii) dithiothreitol treatment + filtration + DNase, (iii) filtration + DNase + PEG precipitation and (iv) filtration + DNase + CsCl density gradient centrifugation. Three of the four tested methods worked well for VLP purification. We observed several differences between methods related to the removal efficiency of bacterial and host DNAs and biases against specific phages. In particular the CsCl density gradient centrifugation method, which is frequently used for VLP purification, was most efficient in removing host derived DNA, but also showed strong discrimination against specific phages and showed a lower reproducibility of quantitative results.ConclusionsBased on our data we recommend the use of methods (i) or (ii) for large scale studies when quantitative comparison of viral abundances across samples is required. The CsCl density gradient centrifugation method, while being excellently suited to achieve highly purified samples, in our opinion, should be used with caution when performing quantitative studies.
| S-EPMC4308010 | biostudies-literature
Project description:This study developed a novel molecularly imprinted polymer (MIP) that is both conductive and redox-active for directly quantifying perfluorooctanoic acid (PFOA) electrochemically. We synthesized the monomer 3,4-ethylenedioxythiophene-2,2,6,6-tetramethylpiperidinyloxy (EDOT-TEMPO) for electropolymerization on a glassy carbon electrode using PFOA as a template, which was abbreviated as PEDOT-TEMPO-MIP. The redox-active MIP eliminated the need for external redox probes. When exposed to PFOA, both anodic and cathodic peaks of MIP showed a decreased current density. This observation can be explained by the formation of a charge-assisted hydrogen bond between the anionic PFOA and MIP's redox-active moieties (TEMPO) that hinder the conversion between the oxidized and reduced forms of TEMPO. The extent of the current density decrease showed excellent linearity with PFOA concentrations, with a method detection limit of 0.28 ng·L-1. PEDOT-TEMPO-MIP also exhibited high selectivity toward PFOA against other per- and polyfluoroalkyl substances (PFAS) at environmentally relevant concentrations. Our results suggest electropolymerization of MIPs was highly reproducible, with a relative standard deviation of 5.1% among three separate MIP electrodes. PEDOT-TEMPO-MIP can also be repeatedly used with good stability and reproducibility for PFOA detection. This study provides an innovative platform for rapid PFAS quantification using redox-active MIPs, laying the groundwork for developing compact PFAS sensors.
| S-EPMC11325644 | biostudies-literature
Project description:Explosive percolation is an experimentally-elusive phenomenon where network connectivity coincides with onset of an additional modification of the system; materials with correlated localisation of percolating particles and emergent conductive paths can realise sharp transitions and high conductivities characteristic of the explosively-grown network. Nanocomposites present a structurally- and chemically-varied playground to realise explosive percolation in practically-applicable systems but this is yet to be exploited by design. Herein, we demonstrate composites of graphene oxide and synthetic polymer latex which form segregated networks, leading to low percolation threshold and localisation of conductive pathways. In situ reduction of the graphene oxide at temperatures of <150 °C drives chemical modification of the polymer matrix to produce species with phenolic groups, which are known crosslinking agents. This leads to conductivities exceeding those of dense-packed networks of reduced graphene oxide, illustrating the potential of explosive percolation by design to realise low-loading composites with dramatically-enhanced electrical transport properties.
| S-EPMC9652282 | biostudies-literature
Project description:Free-standing nanowires can gain intracellular access without causing stress or apoptosis. Current approaches to generate nanowires focus on lithographic patterning and inorganic materials (Si, GaAs, Al2O3, etc.) while organic materials are less explored. Use of organic conductive polymers allows for the creation of soft mixed ion-electron conducting nanowires. Processing conductive polymers into nanowires is challenging due to the harsh chemicals and processing conditions used. Here, we demonstrate a lithography-free and scalable method to generate all-organic, water-stable nanowires composed of conductive polymers. A nanoporous membrane is filled with conductive polymer in solution, followed by a cross-linking step to make the polymer water stable. The surface of the membrane is anisotropically etched using a reactive ion etcher to reveal the polymer inside the pores, which extends from the membrane as nanowires. We interface the nanowires with model algal cells and human primary hematopoietic stem and progenitor cells.
| S-EPMC11869357 | biostudies-literature
Project description:Previous breakthroughs in stretchable electronics stem from strain engineering and nanocomposite approaches. Routes toward intrinsically stretchable molecular materials remain scarce but, if successful, will enable simpler fabrication processes, such as direct printing and coating, mechanically robust devices, and more intimate contact with objects. We report a highly stretchable conducting polymer, realized with a range of enhancers that serve a dual function: (i) they change morphology and (ii) they act as conductivity-enhancing dopants in poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS). The polymer films exhibit conductivities comparable to the best reported values for PEDOT:PSS, with over 3100 S/cm under 0% strain and over 4100 S/cm under 100% strain-among the highest for reported stretchable conductors. It is highly durable under cyclic loading, with the conductivity maintained at 3600 S/cm even after 1000 cycles to 100% strain. The conductivity remained above 100 S/cm under 600% strain, with a fracture strain of 800%, which is superior to even the best silver nanowire- or carbon nanotube-based stretchable conductor films. The combination of excellent electrical and mechanical properties allowed it to serve as interconnects for field-effect transistor arrays with a device density that is five times higher than typical lithographically patterned wavy interconnects.
| S-EPMC5345924 | biostudies-literature
Project description:In soft electronics, anisotropic conductive adhesive films (ACFs) are the trending interconnecting approach due to their substantial softness and superior bondability to flexible substrates. However, low bonding pressure (≤1 MPa) and fine-pitch interconnections of ACFs become challenging while being extended in advanced device developments such as wafer-level packaging and three-dimensional multi-layer integrated circuit board assembly. To overcome these difficulties, we studied two types of ACFs with distinct conductive filler sizes (ACF-1: ~20 μm and ACF-2: ~5 μm). We demonstrated a low-pressure thermo-compression bonding technique and investigated the size effect of conductive particles on ACF's mechanical properties in a customized testing device, which consists of flexible printing circuits and Flex on Flex assemblies. A consistency of low interconnection resistance (<1 Ω) after mechanical stress (cycling bending test up to 600 cycles) verifies the assembly's outstanding electrical reliability and mechanical stability and thus validates the great effectiveness of the ACF bonding technique. Additionally, in numerical studies using the finite element method, we developed a generic model to disclose the size effect of Au/Ni-coated polymer fillers in ACF on device reliability under mechanical stress. For the first time, we confirmed that ACFs with smaller filler particles are more prone to coating fracture, leading to deteriorated electrical interconnections, and are more likely to peel off from substrate electrode pads resulting in electrical faults. This study provides guides for ACF design and manufacturing and would facilitate the advancement of soft wearable electronic devices.
| S-EPMC11012521 | biostudies-literature